• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.27-31
• /
• 2004

지방자치화가 본격화되었지만 우리나라에는 해상경계를 명확히 규정한 법이 없어 지방자치단체간의 해상경계분쟁에 대한 대책이 미흡한 실정이다. 더욱이 지자체가 해역에 대한 권리를 가지는가와 기존 지형도상의 해상경계가 효력이 있는가에 대한 견해도 일치하지 않는 상황이다. 이에 지자체간 갈등의 심화, 주민의 대립 등 분쟁에 따른 피해가 야기되고 있어 해양수산부는 해상경계를 설정하여 문제를 해결할 필요가 있다.

• Spatial Information Research
• /
• v.20 no.2
• /
• pp.45-57
• /
• 2012

Recently, local governments in Korea are promoting the rapid development of marine for delineating jurisdictional sea area. The importance of a maritime boundary has being emphasized, as jurisdictional sea area disputes among local governments have been increasing. The absence of the delineating standard of maritime boundary has become a source of contention between neighborhood local governments. So the delineating standard of maritime boundary in Korea will be required. The purpose of this study is to derive an improvement plan for the scientific delimitation standard of maritime boundary by analyzing "A hydrographic survey guideline for confirmation of maritime boundary". The results of this study are as follows. Firstly, we defined the concept of the delimitation standard of maritime boundary. Secondly, we set the boundary, factors and processes of the delineating standard of maritime boundary through classifying them in detail. Lastly, we suggested the makeup of a conflict adjustment committee for preventing jurisdictional sea area disputes among local governments.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.4
• /
• pp.39-45
• /
• 2016

In this study, with arbitrary reference points on the water, photogrammetry accuracy analysis was conducted using unmanned aerial vehicle(UAV). A small reservoir is a research area, and twenty buoys were used as arbitrary reference points. Errors of location coordinate were identified with control of amounts of used reference points. cases are categorized by index scores per photos. Accuracy of X is 0.141m~0.166m and accuracy of Y is 0.136m~0.241m. Considering that allowable error for the maritime boundary survey is ${\pm}2m$, it is possible to get the accuracy data available for the photogrammetry of UAV using an reference point. In addition, the coefficient of correlation between the number of reference points per unit and number of buoys used as reference point and the ratio of the reference point per square measure, and percentage of buoys used as reference point and the coefficient of x and y were performed. Each element, x, and y showed a strong correlation and the coefficient of number of buoys used as reference point was irrelevant. The results of this correlation analysis can be analyzed that the number of reference points used in each picture is greater than the actual number of reference points used in location accuracy.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.529-534
• /
• 2004

고해상도 위성영상을 이용하여 수치지도를 제작함에 있어 가장 큰 문제점은 레스터 자료인 위성영상에서 경계검출을 통해 벡터자료의 형태로 제작하는 어려움이 있다. 본 연구에서는 경계검출을 통하여 위성영상에서 지형의 경계를 검출해내고, 이를 스크린 디지 타이징 기법을 적용하여 벡터라이징 한 후 나타난 결과를 국토지리정보원의 수치지도와 비교하여 정확도를 비교ㆍ평가하였다. 대상 범위는 대전광역시 유성구 가정동 일부지역을 IKONOS로 촬영된 공간해상도 1m의 위성영상을 사용하였다. 위성영상의 전처리는 기하보정과 정사보정을 거친 후 영상강조를 하였고, 여러 가지의 필터링을 적용하여 경계검출을 수행하였다. 경계검출 방법 중에 하나인 Sobel 연산자를 적용한 후 축척 1:5,000 수치지도와의 중첩을 통하여 표준편차(Root Mean Square Error : RMSE)를 산출하여 비교ㆍ분석하였다. 그리고 스크린 디지타이징 기법을 적용하여 추출한 벡터자료를 건물, 도로 및 임야로 분류하여 수치지도와 중첩하여 정확도를 분석하였다. 그 결과 건물과 도로의 경우에는 공공측량 작업규정에서 정하고 있는 축척 1:5,000의 평면위치 허용오차 기준을 만족하고 있지만, 임야의 경우는 축척 1:10,000 이상의 허용오차기준에 만족되고 있음을 알 수 있었다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.317-325
• /
• 2020

UAV (Unmanned Aerial Vehicle) photogrammetry has recently emerged as a means of obtaining highly precise and rapid spatial information due to its cost-effectiveness and high efficiency. However, current procedures or regulations for quantitative quality verification methods and certification processes for UAV-images are insufficient. In addition, the current verification method for image quality is not evaluated by an MTF (Modulation Transfer Function) analysis or edge response analysis, which can analyze the degree of contrast including image resolution, and only relies on the GSD (Ground Sample Distance) analysis. Therefore, in this study, the edge response analysis using a Slanted edge target was performed along with GSD analysis to confirm the necessity of analyzing edge response analysis in UAV-images quality analysis. Furthermore, a Matlab GUI-based software tool was developed to help streamline the edge response analysis. As a result, we confirmed the need for edge response analysis since the outputs of the edge response analysis from the same GSD had significantly different outcomes. Additionally, we found that the quality of the edge response analysis of UAV-images is proportional to the performance of the camera mounted on the UAV.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.499-505
• /
• 2004

현재 국내에서 활발히 이루어지고 있는 GPS 정밀측지측량은 획득된 GPS 관측값의 결과값이 GPS 기준점의 기하학적 강도와 분산계수의 상관관계의 연관성과의 분석없이 사용되고 있는 문제점을 파악하고 육지와 해상의 통합지리정보시스템구축을 위한 수치지도와 전자해도의 통합투영의 필요성에 의해서 이루어졌다. 본 연구의 목적은 크게 GPS 관측값의 정밀도를 향상시키는 방법과 수치지도와 전자해도의 통합투영으로 GPS 기준점들을 이용한 수치지도와 전자해도상의 경계선 오차량을 비교검토를 통해 수치지도와 전자해도의 통합관리의 방향을 제시하는데 있다. GPS 관측값의 정밀도 향상을 위한 방법제시를 위하여 GPS 망조정에 사용되는 3점의 기준점에 대한 기하학적인 강도에 따른 정밀도 분석방법과 분산계수의 변화에 따른 GPS 관측값들의 정밀도 분석방법으로 나누어 검토하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.223-233
• /
• 2018

In this study was classified the cadastral control points and parcel boundary points into 40m, 100m by flight altitude of UAV (Unmanned Aerial Vehicle) which compared the coordinates extracted from the orthophoto with the parcel boundary point coordinates by GNSS (Global Navigation Satellite System) ground survey. As a results of this study, first, in the spatial resolution analysis that the average error of the orthoimage by flight altitude were 0.024m at 40m, and 0.034m at 100m which were higher 40m than 100m for spatial resolution of orthophotos and position accuracy. Second, in order to analyze the accuracy of image recognition by airmark of flight altitude that was divided into three cases of nothing, green, and red of RMSE (Root Mean Square Error) were X=0.039m, Y=0.019m and Z=0.055m, the highest accuracy. Third, the result of the comparison between orthophotos and field survey results that showed the total RMSE error of the cadastral control points were X=0.029m, Y=0.028m, H=0.051m, and the parcel boundary points were X=0.041m, Y=0.030m. In conclusion, based on the results of this study, it is expected that if the average error of flight altitude is limited to less than 0.05m in the legal regulations related to orthophotos for cadastral surveying, it will be an economical and efficient method for cadastral survey as well as spatial information acquisition.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.275-281
• /
• 2004

Geodetic surveying using precise GPS equipment are used without analysis with a statistical verification of GPS observed value and it was preformed by necessity to integration projection of digital topographic map and nautical Chart for integration geographic information system construction. The purpose of this study proposes method that improve accuracy of GPS observed value and direction that integrally manage digital topographic map and electronic nautical chart in analyzing the boundary line error between digital topographic map and nautical Chart. For improvement of the precision of GPS observed value, the author studied precision-analysis of GPS observed value by geometric strength and variance factor in 3 control points used in GPS network adjustment. This study compare the whole boundary point error When producing EDM measurement using this GPS observation results and setting digital topographic map and nautical chart by these boundary.

• Journal of Navigation and Port Research
• /
• v.29 no.3 s.99
• /
• pp.269-274
• /
• 2005

Geodetic surveying using precise GPS equipment are used without analysis with a statistical verification of GPS observed value and it was preformed by necessity to integration projection of digital topographic map and nautical Chart for integration geographic information system construction. The purpose of this study proposes method that improve accuracy of GPS observed value and direction that integrally manage digital topographic map and electronic nautical chart in analyzing the boundary line error between digital topographic map and nautical Chart. For improvement of the precision of GPS observed value, the author studied precision-analysis of GPS observed value by geometric strength and variance factor in 3 control points used in GPS network adjustment. And like this, produce EDM measurement using this GPS observation results and compare the whole boundary point error when set digital topographic map and nautical chart by these boundary.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.219-228
• /
• 2002

Because western sea on the shore development is threatening sea ecosystem by decrease of silt and large size land-reclamation work by industrialization causes surrounding weather change and sea change, generate much changes bottom of the sea topography and coastline. Also, is influencing to route for safe entry into port of ship, departure. Therefore, this research did 0m boundary line, anxiety 2m line which appear to coastline of land portion and the border of silt using sea base level of lowest low tone side that is base line that appear because of sea waves to basis data numerical value Tuesday, numerical value by divide drawing that is changed to 4 area and analyze change degree of new airport construction and new town development, seashore by western sea district along the coast development of tide embankment construction and so on and bottom of the sea recognize.