DOI QR코드

DOI QR Code

Integrated Management of Digital Topographic Map and Digital Nautical Chart Using Analysis of Control Points in Precise DGPS Surveying

정밀 DGPS측량의 기준점 분석에 따른 수치지형도와 수치해도의 통합관리

  • Jang Yong-Gu (GIS/LBS Research Center, Korea Institute of Construction Technology) ;
  • Kim Sang-Seok (Graduated School, Department of Civil Engineering, Pusan National University)
  • 장용구 (한국건설기연구원 GIS/LBS연구센터) ;
  • 김상석 (부산대학교 토목공학과 대학원)
  • Published : 2005.04.01

Abstract

Geodetic surveying using precise GPS equipment are used without analysis with a statistical verification of GPS observed value and it was preformed by necessity to integration projection of digital topographic map and nautical Chart for integration geographic information system construction. The purpose of this study proposes method that improve accuracy of GPS observed value and direction that integrally manage digital topographic map and electronic nautical chart in analyzing the boundary line error between digital topographic map and nautical Chart. For improvement of the precision of GPS observed value, the author studied precision-analysis of GPS observed value by geometric strength and variance factor in 3 control points used in GPS network adjustment. And like this, produce EDM measurement using this GPS observation results and compare the whole boundary point error when set digital topographic map and nautical chart by these boundary.

현재 국내에서 활발히 이루어지고 있는 GPS 정밀측지측량은 GPS 관측성과가 관측값의 통계적 검증없이 이루어지고 있단 문제점이 있다. 그리고 육지와 해상의 통합지리정보시스템구축을 위한 수치지형도와 수치해도의 통합투영의 필요성이 요구되고 있다. 본 연구를 통하여 GPS 망조정에 사용되는 3점의 기준선에 대한 기하학적인 강도에 따른 정밀도 분석과 분산계수의 변화에 따른 GPS 관측 값들의 정밀도 분석방법으로 GPS 관측값의 정밀도 향상을 위한 방법을 제시하였다. 또한, GPS 관측값의 정밀도를 향상시키는 방법과 수치지도와 전자해도의 통합투영으로 GPS 기준점을 이용한 수지지형도와 수치해도의 경계선 오차량을 비교 검토하여 수치지형도와 수치해도의 통합관리의 방향을 제시하였다. 그리고 이렇게 산출된 GPS 관측결과를 이용하여 EDM 측량결과를 산출하고 수치지형도와 수치해도를 이 정계값들로 맞추었을 때 전체적인 경계점 오차량을 비교 검토하였다.

Keywords

References

  1. 강용균, 이문진 (1995), 두대의 GPS 수신기를 이용한 DGPS 정밀측위, 한국지형공간정보학회논문집, 한국지형공간정보학회, 제3권 2호, pp. 15-28
  2. 강인준 (2004), 측량지형정보공학(I), 문우당, pp.508-581
  3. 강준묵, 임영빈, 송승호, 박정현 (1996), GPS 상대측위에 의한 기선 정확도 분석, 한국지형공간정보학회논문집, 한국지형공간정보학회, 제4권 2호, pp.15-22
  4. 김용일, 김동현, 김병국 (1996), GPS 위치정확도 향상을 위한 의사거리 오차의 분석에 관한 연구, 한국지형공간정보학회논문집, 한국지형공간정보학회, 제4권 2호, pp.79-90
  5. 박찬식 (1997), 한국지역에서 GPS를 이용하여 측정된 위치의 오차해석, 산업과학기술연구소 논문집, 충북대학교 산업기술연구소, 제11권 2호, pp.165-172
  6. 유환희, 표명영, Yoichiro Fujii (1997), GPS 위성의 방송력과 정밀력을 이용한 장기선측정 정밀도 분석, 한국지형공간정보학회 논문집, 한국지형공간정보학회, 제5권 2호, pp. 153-168
  7. 장용구(1995), GPS의 실시간처리률 이용한 Car Navigation의 기초적 연구, 석사학위논문, 부산대학교
  8. 장용구 (1999), GPS를 이용한 동적위치결정에 관한 정확도 향상. 박사학위논문, 부산대학교
  9. David P. Stapleton (2003), GPS/Wide Area Augmentation System(WAAS) Final Approach Error Analysis, Journal of The Institute of Navigation, ION, Vol. 50, No. 1, pp.29-44
  10. Jonathan D. Wolfe and Jason L. Speyer (2002), Universally Convergent Statistical Solution Of Pseudorange Equations, ION, Vol. 49, No. 4, pp. 183-192
  11. Meir Pachter and Thao Q. Nguyen (2003), An Efficient GPS Position Determination Algorithm, Journal of The Institute of Navigation, ION, Vol. 50, No. 2, pp.131-142
  12. Paul E. Henderson, John F. Raquet, and Peter S. Maybeck (2002), A Multiple Filter Approch For Precise Kinematic DGPS Positioning and Carrier-Phase Ambiguity Resolution, ION, Vol. 49, No. 3, pp.149-160
  13. Ryan S. Y. Young and Gary A. McGraw (2003), Fault Detection and Exclusion Using Normalized Solution Separation and Residual Monitoring Methods, ION, Vol. 50, No. 3, pp.151-170