• Aerospace Engineering and Technology
• /
• v.7 no.2
• /
• pp.196-204
• /
• 2008

Modem rotorcraft is required to have the capability to operate in all-weather conditions. Also icing condition is important issue to aircraft safety and certification. And rotorcraft icing research has come a long way during the past few decades. The aircraft icing is the most difficult to handle. So, icing-related accidents, incidents and operating problems still occur regularly in service, despite improvements in design and test techniques. By reviewing icing certification requirement of FAR(Federal Aviation Regulations) and KAS(Korean Airworthiness Standard), this paper describes methods how to demonstrate safety in the flight and consideration of icing when rotorcraft is required TC(Type Certification).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.6
• /
• pp.530-536
• /
• 2010

In-flight icing is a critical technical issue for aircraft safety and, in particular, ice accretions on aircraft surfaces can drastically impair aerodynamic performances and control authority. In order to investigate icing effects on the aerodynamic characteristics of KC-100 aircraft, a state-of-the-art CFD code, FENSAP-ICE, was used. A main wing section and full configuration of KC-100 aircraft were considered for the icing analysis. Also, shapes of iced area were calculated for the design of anti-/de-icing devices. The iced areas around leading edge of main wing and horizontal tail wing were observed maximum 7.07% and 11.2% of the chord length of wing section, respectively. In case of wind shield, 16.7% of its area turned out to be covered by ice. The lift of KC-100 aircraft were decreased to 64.3%, while the drag was increased to 55.2%.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.11
• /
• pp.911-925
• /
• 2020

Aircraft ice protection systems are applied to the window shield, engine inlet, and wings to protect the aircraft from ice that may form on the surfaces of aircraft and sensors during operation. Icing on the aircraft can cause serious accidents by degrading the flight stability of the aircraft and by malfunctions in sensors such as the air data probe. Various types of ice protection systems have been developed for aircraft in the past. The electro-thermal type ice protection system contributes greatly to improving energy efficiency in a relatively simple structure, and has established itself as one of most popular ice protection systems for modern aircraft. In this review, two representative ice protection systems-hot-air and electro-thermal types-were intensively analyzed, and the prospect of ice protection systems was discussed based on the current status and application cases.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.37-46
• /
• 2006

The outside environment is very severe while aircraft is cruising. Especially small particle of icing in cold air condition can have negative influence on aircraft performance. If ice particle is attached to leading edge of wing, it can change wing configuration and decrease flight quality. If icing particle is attached to inlet of engine, it can damage compressor blade and have negative influence to aircraft safety. We make icing simulation device with liquid air system for analyzing about variation of engine performance due to incoming of icing to engine.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.358-361
• /
• 2007

Most aircraft cruise in the stratosphere at which temperature is below $-50^{\circ}C$ md, as a result, the surface of aircraft can be iced up. Ice on the wing can change aerodynamic characteristic and results in the deterioration of its performance. Ice on the engine inlet increases the possibility of compressor blade damage and affects the performance and safety of the engine. This paper focused on the development of icing simulation device for analyzing effect of icing on engine performance. Icing simulation tests were conducted with a liquid air system and a icing simulation device and results show that icing could be simulated with this system.

• Journal of Aerospace System Engineering
• /
• v.17 no.5
• /
• pp.34-41
• /
• 2023

This paper applies the icing effect and wing rock uncertainty to small unmanned aerial vehicles (UAVs), which have recently attracted attention. Attitude control simulations were performed using various control methods. First, the selected platform, the Skywalker X8 UAV with blended wing-body (BWB) configuration, was linearized for both its baseline form, and a form with applied icing effects. Subsequently, using MATLAB SimulinkⓇ, simulations were conducted for roll and pitch attitude control of the baseline configuration and the configuration with icing effects, employing disturbance observer-based PID control, model reference adaptive control, and model predictive control. Furthermore, the study introduced wing rock uncertainty simultaneously with icing effects on the configured model-a combination not previously explored in existing research-and conducted simulations. The performance of each control Method was compared and analyzed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.8
• /
• pp.495-501
• /
• 2016

The measurement of icing conditions needs to be carried out accurately by the ice detector system of an aircraft. Ice detector systems should be installed in locations not affected by backwash, rotor downwash or moving doors or other equipment. Various analyses were carried out in order to find the proper locations sufficiently far from these interfering effects. In this study, the optimum position of the ice detector was assessed using computer simulation, with respect to different flight modes, flow velocities and the amount and distribution of liquid water around the sensor.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.7
• /
• pp.445-454
• /
• 2022

Ice accretion on the aircraft components, such as wings, fuselage, and empennage, can occur when the aircraft encounters a cloud zone with high humidity and low temperature. The prevention of ice accretion is important because it causes a decrease in the aerodynamic performance and flight stability, thus leading to fatal safety problems. In this study, a shape design optimization of a multi-element airfoil is performed to minimize the amount of ice accretion on the high-lift device including leading-edge slat, main element, and trailing-edge flap. The design optimization framework proposed in this paper consists of four major parts: air flow, droplet impingement and ice accretion simulations and gradient-free optimization algorithm. Reynolds-averaged Navier-Stokes (RANS) simulation is used to predict the aerodynamic performance and flow field around the multi-element airfoil at the angle of attack 8°. Droplet impingement and ice accretion simulations are conducted using the multi-physics computational analysis tool. The objective function is to minimize the total mass of ice accretion and the design variables are the deflection angle, gap, and overhang of the flap and slat. Kriging surrogate model is used to construct the response surface, providing rapid approximations of time-consuming function evaluation, and genetic algorithm is employed to find the optimal solution. As a result of optimization, the total mass of ice accretion on the optimized multielement airfoil is reduced by about 8% compared to the baseline configuration.

• Journal of computational fluids engineering
• /
• v.15 no.2
• /
• pp.71-78
• /
• 2010

As a step toward accurate prediction of droplet impingement and ice accretion on aircraft, an Eulerian-based droplet impingement and ice accretion code for air flows around an airfoil containing water droplets is developed. A CFD solver based on the finite volume method was also developed to solve the clean airflow. The finite-volume-based approach for simulating droplet impingement on an airfoil was employed owing to its compatibility with the CFD solver and robustness. For ice accretion module, a simple model based on the control volume is combined with the droplet impingement module that provides the collection efficiency. To validate the present code, it is compared with NASA Glenn IRT (Icing Research Tunnel) experimental data and other well-known icing codes such as LEWICE and FENSAP-ICE. It is shown that the collection efficiency and shape of ice accretion are in good agreement with previous experimental and simulation results.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.45-56
• /
• 2021

Demand for UAM (Urban Air Mobility) aircraft is rapidly increasing in countries around the world due to the problem of traffic congestion in urban areas. Through research and development, various e-VTOL aircraft concepts are being prepared for commercialization, for which airworthiness certification is required, since it is a manned transportation mode for people to board. Factors that pose a fatal threat to the safe operation of UAM aircraft include lightning strikes that can cause damage to structures and disturb the navigation system, as well as icing that impairs flight stability. Since the current UAM aircraft-related lightning and icing certification technology development is insufficient, there is need to develop appropriate airworthiness certification guidelines. In this study, after analyzing the laws and regulations related to aircraft by the FAA and the EASA, we tried to incorporate the lightning and icing certification guidelines for the UAM aircraft. We also analyzed the effects of lightning and icing on UAM aircraft using computational simulation, and presented the basis for establishing practical guidelines for the certification of UAM aircraft to be adopted in the future.