• Current Industrial and Technological Trends in Aerospace
• /
• v.5 no.2
• /
• pp.87-97
• /
• 2007

오늘날 항공기 설계와 제작은 다국적인 산업의 형태로 이루어지고 있다. 즉 항공기 서브시스템은 세계 각국에서 독립적으로 설계, 제작 및 시험한 후 한 곳으로 납품되어 조립 제작되는 데 이 때 중요한 것이 표준화이다. 항공전자장비의 낙뢰 간접영향에 대한 인증의 경우 RTCA DO-160E, Section 22 Lightning Induced Transient Susceptibility(낙뢰 유도 과도현상 적응성)로 표준화 되어 있다. 이 Section 22는 낙뢰 간접영향에 대한 항공전자장비 단위 즉, LRU (Line Replaceable Units)와 같은 부품단위의 시험 요건을 규정하고 있으며 이 규격은 현재 전 세계적으로 통용이 되고 있다. 1980년대 초 상용 수송기에 디지털 "Fly by Wire" 비행 시스템과 엔진제어시스템(EEC, Electronic Engine Control)의 도입 이후, 항공기 시스템이 낙뢰 환경에서 운용시 신뢰성을 보증할 필요성이 대두되었다. 데이터 처리를 통하여 제어되는 각종 항공전자장비에는 다중타격(MS)과 다중파열(MB) 기법에 의한 시험 사항이 최근 추가 되었다. 실제 낙뢰 환경과 유사한 시험실 모사를 위해 계속적인 연구가 진행 중이며 신규 시험 규격서가 새로이 출간되고 있다.

• Defense and Technology
• /
• no.8 s.174
• /
• pp.36-43
• /
• 1993

신예 항공기들은 고가의 무기와 첨단전자장비들을 갖추고 있기 때문에 가격 또한 엄청나게 비쌉니다. 따라서 전투시에 상대의 후방까지 깊숙하게 침투시에 상대의 후방까지 깊숙하게 침투하여 목표물을 공격하되, 아군 항공기의 손실은 최소로 줄이는 것이 승패를 좌우하는 매우 중요한 요소입니다 따라서 항공기의 생존성을 제고하기 위해서는 상대의 레이다에 포착되지 않는 은폐기술 즉, 스텔스(stealth)성능이 필수적입니다

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.3
• /
• pp.71-77
• /
• 2005

An unmanned aerial vehicle (UAV) is generally flied via a pre-planned flight path or real-time commands by an operator. To succeed in an assigned mission, analysis such as the line-of-sight analysis for communication between UAV and a ground data terminal should be performed. In this paper, various analysis algorithms which are performed by a ground control station in pre-flight and in-flight phases, are proposed for the safe flight of UAV. Note that the proposed algorithms can be applied to most UAV systems.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.236-244
• /
• 2008

The evolution and application of RFID technologies have been at the forefront of allowing aviation industries to improve the quality of aircraft maintenance and air cargo handling. However, safety problems in airplane operation are arising from the hazards of frequencies transmitted due to RFID systems. Though the intensities of frequencies back-scattered from the tags are very weak, some malfunctions are anticipated due to induction coupling on aircraft wiring. Therefore, safety assessment such as electromagnetic compatability should be accomplished upon aircraft critical and essential equipments before installations.

• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.459-465
• /
• 2017

In this paper, we introduce the design consideration of the lightning induced transient protection circuit for the indirect lightning strike on the avionics equipment. The lightning induced surge voltage, which is so-called as indirect effects of lightning, may cause a functional failure or physical damage to the electrical and electronic equipment of aircraft. In order to protect the electrical and electronic equipment of aircraft from the indirect effects of lightning, we should analyze the effect of lightning strike on aircraft and consider applying protection design for each avionics device. However, lightning induced transient protection circuits can have unintended consequences because parasitic inductance elements are exist in PCB and TVS diodes. In this paper, we introduce the design method of the protection circuit considering the parasitic inductance of the protection circuit. In addition, we show the result of verification test performed to validate the protection circuits for indirect effects of lightning.

• 한국항공운항학회:학술대회논문집
• /
• 2015.11a
• /
• pp.252-256
• /
• 2015

항공기 운항과 밀접하게 관련되는 장비중에 하나가 CNS&ATM관련 탑재 항공전자 장비이다. 임베디드 소프트웨어가 들어간 항전장비 개발에 에러 유입이 주로 요구도 분석 및 아키텍쳐 설계에서 일어난다. 항공전자 장비 개발에 운영자가 적극적으로 참여함으로써 에러 발생 요인 감소, 고장 영향성 분석, 요구도 기반 시험 등을 효율적으로 수행할 수가 있어, 장비의 개발기간 및 비용을 줄일 수가 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.90-96
• /
• 2020

In this era, intelligence is considered a major factor in the defense sector. As a result, securing technology for weapons systems for monitoring and reconnaissance of companies has become inevitable. As a result, UAVs (Unmanned Aerial Vehicles) have been developed and are actively operating around the world if the flight operation of manned aircraft is restricted, such as in environments that are too dangerous, messy or boring for the military to perform directly. The system of unmanned aerial vehicles, which has been researched and developed in Korea, includes Air Vehicle Test Equipment(AVTE). AVTE is equipment that is connected to an UAV to check its status and allows the operator to check its flightability by issuing an operational command to the UAV and verifying that it follows the command values. This study conducts fault finding on the phenomenon where the AVTE has stopped operating due to engine noise during these operations and analyzes the cause in terms of software, hardware and external environment. Present improvement measures according to the cause are analyzed and the results of verifying that the proposed measures can prevent failure are addressed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.10
• /
• pp.1010-1016
• /
• 2009

In this paper, we have described an aircraft captive flight test for the development test of weapon systems. We have conducted a captive flight test for the development of core onboard parts and sensors of airborne weapons and guided missiles. We have used KTX-1/XKO-1 aircraft as a platform for the captive flight test. In order to perform a captive flight test, we have made a captive test pod as a shape of external fuel tank in the XKO-1 and have modified XKO-1 aircraft for a system interface. We have taken a development test about all kinds of seekers, navigation & guidance systems, and core part of guided missile through the aircraft captive flight test.

• Journal of Aerospace System Engineering
• /
• v.16 no.4
• /
• pp.60-67
• /
• 2022

An Electro-Optical Tracking System (EOTS) is an electric optical system with EO/IR cameras, laser sensors, and an IMU. The EOTS calculates coordinates of targets, using attitude and acceleration measured by the IMU. In particular for an armed aircraft, the performance of the weapon system depends on how quickly and accurately it acquires the target coordinates. The IMU should be operated after alignment is complete, to meet the coordinate accuracy required by the weapon system so the initial stabilization time of the IMU should be reduced, by quickly measuring the attitude and acceleration. Alignment is the process of determining the initial attitude by resolving the attitude error of the IMU, and the IMU of mission equipment such as an airborne EOTS, uses velocity matching based on the velocity from GPS/INS for aircraft navigation. In this paper, a method is presented to improve the transfer alignment performance of the airborne EOTS, by maneuvering aircraft and the mission equipment. First, the performance factor of the alignment was identified, as a heading error through the velocity matching model and simulation results. Then acceleration maneuvers and attitude changes were necessary, to correct the error. As a result of flight tests applied to an EOTS on a OOO aircraft system, the transfer alignment performance was improved as the duration time was decreased, by more than five times when the aircraft accelerated by more than 0.2g and the EOTS was moving until 6.7deg/s.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.2
• /
• pp.147-154
• /
• 2021

In this paper, the configuration and design of the test equipment are presented to examine the impact of rapid temperature change in cooling-air that may occur during the operation of the fixed wing aircraft Environmental Control System (ECS) on avionic electronic equipment. At the start of the ECS, the temperature of the air supplied by the aircraft ECS may be increased to 5.0℃ per second. In order to ensure operating of the avionic electronic equipment that is mounted on the aircraft and receives cooling-air from the ECS, testing equipment that can implement the cooling-air characteristic test environment is required. During design of test equipment was verified cooling-air rapid rate of temperature change by performing a thermal/flow analysis, performance of the test equipment implemented was verified by applying an avionic electronic equipment.