• 대기
• /
• 제18권3호
• /
• pp.225-235
• /
• 2008

Sulfur hexafluoride ($SF_6$), man-made compound, has been paid attention as a potent greenhouse gas. After Kyoto Pototcol on Climate Change in 1997, nations established the policy aimed at minimizing release of $SF_6$ to atmosphere. We have developed and operated an automatic analytical system for monitoring atmospheric $SF_6$ using gas chromatography with electron capture detector (GC-ECD) and packed separate-column. Here, we report and discuss 4-month record of atmospheric $SF_6$ concentrations monitored at Seoul National University (SNU) pilot station near the Kwanak Mountain, Seoul. Most of observed $SF_6$ concentrations were excessively high compared with Northern Hemisphere (NH) background trend obtained from National Oceanic and Atmospheric Administration (NOAA) Earth System Research Laboratory (ESRL) monitoring stations. And the observed $SF_6$ showed extremely wide variability ranging from 4.6 pptv to $1.1{\times}10^3$ pptv, which may be affected by local sources placed nearby. Simultaneous wind data with $SF_6$ measurements show that relatively high values of $SF_6$ correspond to weak wind as well as southerly. There are many engineering installations to the south of the station. The regional value of the atmospheric $SF_6$ estimated from the data selection by wind conditions is about 6.8 pptv. This value, which is similar to concentrations of urban areas, is higher than NH background concentration.

• 한국재료학회지
• /
• 제19권2호
• /
• pp.68-72
• /
• 2009

This study investigated dry etching of acrylic in capacitively coupled $SF_6$, $SF_6/O_2$ and $SF_6/CH_4$ plasma under a low vacuum pressure. The process pressure was 100 mTorr and the total gas flow rate was fixed at 10 sccm. The process variables were the RIE chuck power and the plasma gas composition. The RIE chuck power varied in the range of $25{\sim}150\;W$. $SF_6/O_2$ plasma produced higher etch rates of acrylic than pure $SF_6$ and $O_2$ at a fixed total flow rate. 5 sccm $SF_6$/5 sccm $O_2$ provided $0.11{\mu}m$/min and $1.16{\mu}m$/min at 25W and 150W RIE of chuck power, respectively. The results were nearly 2.9 times higher compared to those at pure $SF_6$ plasma etching. Additionally, mixed plasma of $SF_6/CH_4$ reduced the etch rate of acrylic. 5 sccm $SF_6$/5 sccm $CH_4$ plasma resulted in $0.02{\mu}m$/min and $0.07{\mu}m$/min at 25W and 150W RIE of chuck power. The etch selectivity of acrylic to photoresist was higher in $SF_6/O_2$ plasma than in pure $SF_6$ or $SF_6/CH_4$ plasma. The maximum RMS roughness (7.6 nm) of an etched acrylic surface was found to be 50% $O_2$ in $SF_6/O_2$ plasma. Besides the process regime, the RMS roughness of acrylic was approximately $3{\sim}4\;nm$ at different percentages of $O_2$ with a chuck power of 100W RIE in $SF_6/O_2$ plasma etching.

• 한국조리학회지
• /
• 제18권1호
• /
• pp.1-14
• /
• 2012

본 연구는 여러 가지 생리활성 물질을 가지고 있는 콩식이섬유의 섭취를 증가시키기 위하여 콩식이섬유 SF-1450과 SF-1260을 각각 강력분에 0~12% 첨가하여 식빵을 제조하였다. 콩식이섬유 복합분의 식이섬유 함량은 SF-1450, SF-1260 각각 72.0%, 67.8%이었다. Mixograph 특성은 midline peak height, width at peak, width at 8.00 에서는 콩식이섬유 첨가량이 증가할수록 증가하는 경향을 보였다. 식빵의 비용적은 콩식이섬유 첨가량이 증가할수록 대조구보다 유의적으로 감소하는 경향을 보였다. Crust 색도변화는 콩식이섬유의 첨가량이 증가할수록 각각 L값은 4~12% 첨가구에서 대조구보다 유의적으로 증가하였고 a값은 SF-1450은 6~12% 첨가구, SF-1260은 8~12% 첨가구에서 대조구보다 유의적으로 감소하였으며 crumb 색도변화는 b 값의 경우 대조부보다 유의적으로 증가하였다.(p<0.05). Texture의 특성인 경도의 경우 SF-1450은 10~12% 첨가구에서, SF-1260은 6~12% 첨가구에서 대조구보다 유의적으로 증가하였다. 이상에서 살펴본 바와 같이 콩식이섬유 첨가식빵의 관능특성은 첨가량이 증가함에 따라 대조구보다 품질이 떨어지는 현상을 보였고, 이화학적 분석과 전체적인 기호도를 종합해보면 SF-1450의 경우는 2~4%, SF-1260의 경우는 2% 첨가구의 경우가 우수하게 평가되었다.

• 멤브레인
• /
• 제26권2호
• /
• pp.159-165
• /
• 2016

다단기체분리 공정을 수행하기 위해 폴리이미드 중공사막 모듈을 제조하여 혼합기체 $N_2$ : $SF_6$ = 50 : 50에 대한 기체분리특성을 확인하였다. 제조된 중공사막 모듈은 0.5 MPa에서 stage cut을 조절하여 투과 유량, 농도 등의 성능을 측정하였다. 중공사막 모듈은 1단 분리 테스트에서 $N_2/SF_6$ 선택도가 높을수록 동일한 stage cut에서 높은 $SF_6$ 회수율을 얻을 수 있었다. 1단 시험결과에 따라 $SF_6$ 회수율과 농축농도를 동시에 높이기 위해 2단 기체 분리 테스트 진행함으로써 $SF_6$ 회수율 95% 이상, $SF_6$ 회수농도 98% 이상을 농축할 수 있었다.

• KEPCO Journal on Electric Power and Energy
• /
• 제6권1호
• /
• pp.53-58
• /
• 2020

Korea Electric Power Corporation (KEPCO) uses large amount of SF₆, one of the potent greenhouse gases, in electric equipment for electrical insulation. KEPCO is developing SF₆ recovery and purification technology to minimize the release of SF₆ into the environment, to secure certified emission reduction, and to save purchase cost of new SF₆ by reusing the refined SF₆. A prototype SF₆ purification system using cryogenic solidification technology has been built in demonstration scale. To evaluate the feasibility of the commercialization, the system has been operated to purify large amount of used SF₆ in a long-term operation and the performance has been economically evaluated. The system was stable enough for commercial operation such that it was able to purify 5.4 tons of used SF₆ from power transmission equipment in 2-month operation. Over 99% of the SF₆ was recovered from the used gas and the purity of the purified gas was over 99.7 vol%. The operation cost, which is the cost of refrigerant (liquid nitrogen), electricity and labor, per kilogram of purified SF₆ was 6,526 KRW. Considering the price of new SF₆ in Korea is about 15,000 KRW per kilogram this year, about 56% of the purchase cost can be saved.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.335-338
• /
• 2004

In this paper the experiments of insulation characteristics by temperature change of $SF_6$ gas and insulation characteristics about liquid $SF_6$ in GIS(Gas Insulated Switchgear) were described. From this result, at low temperature, the breakdown voltage was increased with a drop of temperature and an increase of the inner pressure in GIS. The ability of insulation in liquid $SF_6$ was higher than that of the highly pressurized $SF_6$ gas. A liquid $SF_6$ discharge characteristics was caused by bubble formed evaporation of liquid $SF_6$ and bubble when high voltage apply to electrode. Corona was happened to weak bubble and was proceed to new bubble breakdown.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.151-154
• /
• 2005

In this paper the experiments of insulation characteristics by temperature change of $SF_6$ gas and liquid $SF_6$ in model GIS(Gas Insulated Switchgear) were described. From this results, the breakdown voltage was increased with a drop of temperature and an increase of the inner pressure in model GIS. The ability of insulation in liquid $SF_6$ was higher than that of the highly pressurized $SF_6$ gas. A liquid $SF_6$ discharge characteristics was caused by bubble formed evaporation of liquid $SF_6$ and bubble caused by high electric emission. It is considered that these result are fundamental data for electric insulation design of superconductor and cryogenic application machinery which will be studied and developed in the future.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.130-136
• /
• 2003

A FQI(fatigue quality index) analysis using the concept of SF(severity factor) is performed to various shape of elliptical hole. FQI is fatigue quality index to estimate the dynamic SF from static SF by finite element analysis. Since the SF is affected by the location of cutout in plate and radius ratio, static SF is analyzed with finite element method and forms the equation of FQI for predicting a dynamic SF. To examine the validity, dynamic SF is measured by photoelastics and thermalelastics for an epoxy resin plate with various elliptical holes under dynamic load.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2018년도 추계학술발표대회
• /
• pp.122-125
• /
• 2018

최근 다양한 네트워크 서비스에 대한 수요가 증가함에 따라 Service Function (SF)의 동적 구성을 위한 유연한 모델이 요구된다. Service Function Chaining (SFC)은 일련의 SF로 구성된 새로운 네트워크 서비스 배포 모델을 정의한다. Software Defined Networking (SDN)은 제어 평면을 중앙 집중화함으로써 네트워크 트래픽 제어를 단순화하여 SFC동작에 중요한 역할을 한다. SDN 기반 SFC(SD_SFC)는 SF 장애를 감지하기 위한 모니터링 시스템이 필요하다. 그러나 기존의 모니터링 방식은 모든 SF에 Monitoring Agent(MA)를 배치하기 때문에 높은 시그널링 비용을 가진다. 본 논문에서는 최소한의 SF에 MA를 배치함으로써 시그널링 비용을 줄이는 SFC모니터링 방식을 제안한다. 제안하는 SF selection 알고리즘은 최적화된 SF 집합을 사용하여 오버로드된 SF를 반환하여 MA를 배치한다. 우리는 제안 시스템의 효율성을 평가하기 위해 테스트베드 구현을 통해 실험하였다. 실험 결과에 따르면 우리는 기존 방식에 비해서 시그널링 비용을 59.2% 절감하였다.

• 한국환경과학회지
• /
• 제22권1호
• /
• pp.83-89
• /
• 2013

Silicon carbide with aluminium oxide was used to remove the sulphur hexafluoride ($SF_6$) gas using microwave irradiation. The destruction and removal efficiencies (DREs) of $SF_6$ were studies as a function of various decomposition temperatures and microwave powers. The decomposition of $SF_6$ gas was analyzed using GC-TCD. XRD (X-ray powder diffraction) and XRF (X-ray Fluorescence Spectrometer) were used to characterize the properties of aluminum oxide. DREs of $SF_6$ were increased as the microwave powers were increased. Additive aluminium oxide on SiC increased the removal efficiencies and decreased the decomposition temperature. The XRD results show that the ${\gamma}-Al_2O_3$ was transformed to ${\alpha}-Al_2O_3$ during $SF_6$ decomposition by microwave irradiation. It was found that the best material to control $SF_6$ was SiC with $Al_2O_3$ 30 wt% in consideration of microwave energy consumption and $SF_6$ decomposition rate.