• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1D
• /
• pp.67-72
• /
• 2008

Heavy equipment is a very important factor for successful construction implementation. Also, the cost for heavy equipment is a major part of construction cost. Therefore, the estimation of equipment cost is a critical job in the construction planning phase. A formula for production rates shown in 'Standard Unit Labor' has been used to estimate construction equipment capability per hour and cost. Although the performance of equipment has been improved, the efficiency rates in the formula are not updated lately. Therefore, this research performed several site visits to measure construction equipment working time and then calculates the efficiency rates for hydraulic backhoe, loader, and dump truck. The results show that the measured efficiencies of backhoe and loader are higher than current ones and vice versa for dump truck. This research proposes the needs for a standardized calculation formula and systematic and long-term data collection and measurement for updating efficiency rates for heavy equipment.

• 월간 기계설비
• /
• s.299
• /
• pp.87-93
• /
• 2015

건설공사의 공사비를 산출하기 위해서는 공사에 필요한 노무 자재 및 장비의 정확한 투입량을 알아야 한다. 이를 위해 정부는 1970년부터 표준품셈을 제정하여 현재까지 공공기관에서 시행하는 건설공사의 예정가격 산출에 활용하고 있다. 표준품셈은 한국건설기술연구원에서 제 개정 희망항목 조사와 현장실사, 심의위원회를 거쳐 국토부에서 매년 상 하반기에 제 개정 내용을 공포하고 있다. 이번 호에는 회원사들이 궁금해 하는 표준품셈 제 개정과정에 대해 알아본다. 매년 개정된 기계설비 표준품셈은 대한기계설비건설협회에서 인쇄하여 회원사에게 배포하고 있으며, 협회 홈페이지(ww.kmcca.or.kr${\rightarrow}$자료실${\rightarrow}$각종기준표${\rightarrow}$표준품셈/일위대가표)에서 다운받을 수 있다.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.1
• /
• pp.155-166
• /
• 2008

The Equipment Expenses section of the Poom-Saem that is used for Construction Cost Estimation of public sectors in Korea has been rarely revised, and so does not reflect changes of Construction Equipment technology and construction methods, since it was established based on data from Japan and the U.S in the early 1960s. In order to make reasonable estimation of equipment expenses for a bulldozer and a loader, the domestic and overseas documentary records were investigated. Further, 16 construction sites were visited, and 20 Construction Equipment leasing services were surveyed. The optimum level of each item which consists of equipment costs was revealed based on the result of the analysis on the figures of equipment costs calculation from the Poom-Saem and the collected data. The research will be the foundation for applying the rapid development of Construction Equipment and technology to the appropriate cost estimations and the ground work of related studies.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.2
• /
• pp.67-80
• /
• 2008

Recently, automated construction machines have been developed for technically solving construction industry problems such as labor, productivity, qualify and the profit decrease. In spite of the importance of performance analysis in order to commercialize the automated construction machines, previous studies are mainly forced on developing hardware and software of automated construction machines. The primary objective of this research is to propose the performance analysis model of automated construction machines, which can measure productivity, quality and safety improvement rate based on the research and development phases, and to develop a performance analysis system, which enables performance evaluator to easily analyze the performance of the automated construction machines. Finally, it is anticipated that the effective use of the performance analysis model and computerized system would be able to develop the automated construction machines having high performance, and to establish the marketing strategy effectively in order to increase the possibility of commercialization of the developed construction machines.

• 월간 기계설비
• /
• s.262
• /
• pp.38-47
• /
• 2012

올해 1월 1일부터 기계설비의 겸업제한이 폐지되면서 주계약자공동도급제도가 기계설비에 적용되고 있다. 이에 따라 한국철도시설공단이 지난 4월 2일 총 700억원 대의 기계설비공사를 주계약자 공동도급으로 발주하였고 LH공사에서도 600여억원대의 기계설비공사를 주계약자 공동도급으로 발주할 예정이다. 이같은 성과는 대한설비건설협회가 지난해부터 건설산업 공생발전위원회를 비롯하여 국토해양부 장관과의 간담회, 국가기관 및 정부투자기관 등에 주계약자 공동도급을 기계설비공사에 적용하여 줄 것을 강력히 건의한 결과이다. 또한 서울특별시회를 비롯한 13개 전국 시 도회에서도 지방자치단체에 주계약자 공동도급이 적용될 수 있도록 적극 건의하고 있어 앞으로 국가공사와 지자체 공사에서 주계약자 공동도급이 활발히 발주될 전망이다. 지난 2009년 겸업제한이 폐지된 전문업종에 한하여 주계약자 공동도급이 도입된 이래 전문공사의 경우 3년 동안 총 1,100억원 대의 공사가 발주되었다. 그러나 기계설비공사는 대한설비건설협회의 부단한 노력에 힘입어 주계약자 공동도급이 적용된 지 4개월 만에 한국철도시설공단과 LH공사에서 6건의 공사에 총 1천300억원 대의 공사가 발주되는 성과를 거두었다. 이번 호에는 주계약자 공동도급에 대하여 자세히 알아본다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.503-508
• /
• 2007

The Equipment Expenses section of the Poom-Saem, that is used for Construction Cost Estimation on public sectors in Korea, has been rarely revised, and so does not reflect changes of construction equipment technology and construction methods, since it was established based on data from Japan and the U.S in the early 1960s. In order to make reasonable estimation of maintenance costs(Interest, Storage, Insurance, Tax), the equipment expenses section of the Poom-Saem and the domestic and overseas documentary records were investigated. Further, 16 construction sites were visited, and 20 Construction Equipment leasing services were surveyed. Based on results from analysing figures related with the estimation of maintenance costs, the maintenance cost is redefined. Then, construction equipment was classified into 6 exclusive construction equipment and general one, and realistic figures of the maintenance cost, which consists of interest, storage, insurance, tax, are suggested respectively. The optimum level of each item which consists of equipment costs was revealed based on the result of the analysis on the figures of equipment costs calculation from the Poom-Saem and the collected data. The research will be the foundation that helps to estimate appropriate construction costs and the ground work of related studies.

• 월간 기계설비
• /
• s.311
• /
• pp.40-51
• /
• 2016

Rail로 세상을 연결하여 국민의 행복을 창조하기 위해 노력하는 한국철도시설공단(이사장 강영일)은 수서~평택 간 수도권 고속철도사업을 올해 안으로 완수하기 위해 노력하고 있다. 한국철도시설공단이 추진하는 수도권고속철도(수서~평택) 건설사업은 서울 강남의 수서역에서 출발하여 동탄역을 거쳐, 평택역에서 현재 운영 중인 경부고속철도와 접속하는 노선으로 총 3조7천억원이 투입됐다. 지난 2011년 착공하여 올해 말까지 완공할 계획으로, 대부분의 구간을 지하로 건설한다. 수도권고속철도가 건설되면 KTX 수서역 동탄역이 신설되어 서울 강남 강동권 및 경기 동남부 지역까지 KTX 수혜범위가 확대되고 수서에서 부산까지 2시간 2분, 목포까지 1시간 52분으로 운행시간이 크게 단축되어 이용객 증가는 물론 지역균형발전과 성장동력 확보에 기여할 것으로 예상된다. 본지는 수서역사와 율현터널 현장에서 한국철도시설공단 수도권고속철도건설단 건축설비부 신승섭 차장(기계설비 감독관)과 율현터널(제1공구) 기계설비를 시공 중인 (주)세화이엔지[대표 박현수] 윤한식 현장소장, 수서역사 기계설비를 시공 중인 (주)초록이노텍[대표 양기준] 홍승훈 현장소장, (주)서한종합건축사사무소 홍형창 기계부장(감리단)을 만나보았다.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.6
• /
• pp.121-132
• /
• 2012

The current estimation system of construction equipment cost was first introduced in 1960's when general contractors had ownership of equipment. However, most of construction equipment in construction sites has been rented from equipment leasing company these days. Therefore, the improvement of current cost estimation system is therefore inevitable in order to advance domestic construction industry. This study is aimed to suggest the improved system by analyzing nationwide market rental rates of major construction equipment. A user friendly prototype of actual database grounded on actual market rental rates collected from over 200 leasing companies in the nation was proposed. The database includes various rates and statistics analyzed by different form of contract as well as different region. Using the collected data, "The Cost Estimate System in Construction Equipment Database" was developed by using VBA(Visual Basic for Applications). The system makes users convenient to utilize the rental rates by choosing equipment and region, and various types of contract.

• 월간 기계설비
• /
• s.155
• /
• pp.18-19
• /
• 2003

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.2 s.30
• /
• pp.148-161
• /
• 2006

This study aims at surveying the current competitive position of our construction machinery industry in the international market. We will then reveal the critical issues by applying a SWOT analysis and a Delphi research from the viewpoint of strategic planning. At the same time, policy alternatives are also sought after as contributory tools to resolve the strategic issues demonstrated in this analysis and research.