• Journal of Auto-vehicle Safety Association
• /
• v.16 no.1
• /
• pp.49-54
• /
• 2024

This paper provides an analysis of the experimental procedures and results to ensure the reliability of the system manufactured for testing the hydrogen permeability of a 175 L compressed hydrogen container for a hydrogen bus. Based on the hydrogen permeability standard of 6 cc/(h·L), it was injected into the permeability test chamber at 10% intervals, and the permeated hydrogen concentration according to the injected amount was measured and compared with the actual amount of hydrogen permeated. As a result of the experiment, the measured value represented 96.34% of the actual permeation amount, which can be used as basic data for the hydrogen bus vessel permeability test system being built in Korea.

• Journal of the Korean Institute of Gas
• /
• v.4 no.1 s.9
• /
• pp.1-8
• /
• 2000

Third party damage is one of the causes intrimiting the safety of a buried pipelines and it is very important to detect third party damage on pipelines as soon as possible. The purpose of this study is whether third-party damage can be detected by accelerometer sensor and how far the third-party damage signal can propagate. And a pilot experiment was carried out in order to find third-party damage location. As a result, the detected signal's spectum is high frequency at short distances, as the distance is far, the signals in high frequency range are attenuated and those in low frequency range remain. It was also proved that third-party damage within 5.3km distance can be detected by monitoring vibration signals.

• The Safety technology
• /
• no.183
• /
• pp.14-15
• /
• 2013

사업장에 우수한 안전문화를 정착시키기 위한 필수요소는 무엇일까. 근로자들의 적극적인 참여, 원활한 노사관계, 경영진의 확고한 의지, 선진 안전기술 및 기업 등 다양한 요소가 있다. 이 모두가 무재해 사업장을 만드는 기본 틀이지만 그중에서도 '경영진의 안전의지'는 단연 사업장 안전활동의 성패를 결정짓는 핵심 요건이라고 할 수 있다. 실제 우수한 안전관리 체계가 갖추어진 사업장들을 보면, 공통적으로 경영진이 안전보건에 높은 관심을 가지고 있음을 확인할 수 있다. 지난해 말 열린 안전경영대상에서 최고상인 종합대상의 영예를 차지한 한국가스공사 인천기지본부 역시 이런 특징을 갖고 있다. 본부의 총책임자인 유두현 본부장이 굳건한 안전 신념으로 사업장 전반의 안전관리를 진두지휘하고 있는 것이다. 유 본부장을 만나 그의 경영방침과 철학 등에 대해 들어봤다.

• Journal of Climate Change Research
• /
• v.4 no.1
• /
• pp.63-75
• /
• 2013

The purpose of this study is to analyze the green-house gas emission reduction of the pump scheduling system applied to the water-supply facilities in all objectivity with AMS-II.C/Version 13 in CDM methodology. To calculate the baseline and project emission in Paldang Pumping Station (III) the data about water flow, water level, electricity consumption, etc. before and after the implementation of project was used. This study considers internal facility (mostly for lighting) electricity consumption and grid loss in order to get more accurate emission reductions. The methodology used in this study will be able to apply to different energy improvement techniques to calculate emission reductions in water supply facilities.

• Electric Engineers Magazine
• /
• s.362
• /
• pp.40-41
• /
• 2012

2012년 8월 13일(월) 11시 17분경, 서울시 종로구 소격동 소재, 국립현대 미술관 건립공사현장 지하 3층 기계실 천장에 설치되어있던 가설전등(메탈할라이드)에서 발생한 전기 스파크로 천장 폴리우레탄폼이 발화되어 4명이 유독가스에 의해 질식 사망하고 9명이 부상을 입은 재해임.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.1 s.35
• /
• pp.116-123
• /
• 2007

Recently orders of project in the field of oil & gas plant have been increased due to raising oil prices and consumptions. Domestic oil & gas companies are expanding into the Middle East area and all over the world. In the field of oil & gas plant, it is important to manage a technical control and a license that is occurred when developing the manufacturing processes and technologies. Because the oil & gas market has a lot of executions of the oversea construction, competitions between the advanced companies is more important. Therefore, we have to adopt systematic management style for achievements of the technical competitive power and the higher position. However, domestic oil & gas plant companies have not enough competitive powers of the license and the design phase. So, they are faced with difficulties of adopting the technology which is maximizing the effect of investments and scheduling a long-range plan. To achieve the technology management and the competitive power, this study proposes a long-range plan through the analysis of execution methods for technology management.

• Journal of the Korean Institute of Gas
• /
• v.25 no.4
• /
• pp.27-35
• /
• 2021

Recently, as a solution to the sharp drop in "power reserve ratio", it is being converted to a microgrid that enables bi-directional transmission and distribution. A microgrid is composed of a small-scale distributed power supply and a load. As a representative technology of distributed power generation, there is a Micro Combined Heat and Power system applied to homes and buildings. In this study, a safety standard was developed by dividing the power generation system, cooling system, lubrication system, and exhaust system to derive safety standards for a small gas engine power generation system with a gas consumption less than 232.6kW (200,000 kcal/h). In the case of the power generation system, a filter was installed and the system was stopped by detecting gas leakage and abnormalities in engine speed or output and the cooling system is stipulated to stop the system in case of insufficient cooling water or overheating. The lubrication system monitors the pressure and temperature of the lubricating oil and stops the system when an abnormality occurs, and the exhaust gas emission concentration regulation value was specified in accordance with domestic and foreign standards. Through the results of this study, it is judged that the safety of the gas engine power generation system can be improved and it can contribute to the commercialization of products.

• Journal of the Korean Institute of Gas
• /
• v.28 no.2
• /
• pp.93-104
• /
• 2024

Facility diagnosis is essential for the smooth operation and life extension of rotating equipment used in industrial sites. Compared to other diagnostic methods, vibration diagnosis can find most of the initial defects, such as unbalance, alignment failure, bearing defects and resonance, compared to other diagnostic methods. Therefore, vibration analysis is the most commonly used facility diagnosis method in industrial sites, and is usefully used as a predictive preservation (PdM) technology to manage the condition of the facility. However, since the vibration diagnosis method is performed based on experience based on the standard, it is carried out by experts. Therefore, it is intended to contribute to the reliability of the facility by establishing a system that anyone can easily judge defects by establishing a vibration diagnosis method performed based on experience as a knowledgeable code system. An algorithm was developed based on the ISO-20816 standard for vibration measurement, and the reliability was verified by comparing the results of vibration measurement at various demonstration sites such as petrochemical plant compressors, hydrogen charging stations, and industrial machinery with the results of analysis using a development system. The developed algorithm can contribute to predictive maintenance (PdM) technology that anyone can diagnose the condition of the rotating machine at industrial sites and identify defects early to replace parts at the exact time of replacement. Furthermore, it is expected that it will contribute to reducing maintenance costs and downtime due to the failure of rotating machines when applied to various industrial sites such as oil refining facilities, transportation, production facilities, and aviation facilities.

• Magazine of korean Tunnelling and Underground Space Association
• /
• v.5 no.3
• /
• pp.8-52
• /
• 2003

본 고는 일본터널기술협회가 발간한 "터널공사용 기계편람"을 기초로 작성한 것으로 터널공사에 사용되는 기계중 공기압을 동력원으로 하는 기계에 필요한 공기와 터널굴착 작업시 발생하는 유해가스 및 분진제어를 위해 막장에 신선한 공기를 공급하기 위한 급기설비, 터널에서 사용되는 물의 원활한 공급과 터널내 용수를 터널외부로 배수하기 위한 급${\cdot}$배수 설비, 터널건설에 필요한 모든 전기를 수급 및 공급하는 수${\cdot}$ 변전 설비와 터널건설에 필요한 대형장비의 이동을 위한 크레인 설비의 총 3편으로 나누어 설명한다.

• Annual Conference of KIPS
• /
• 2012.04a
• /
• pp.208-211
• /
• 2012

전력시스템에서 MDMS(Meter Data Management System)는 HAN(Home Area Network)과 Smart Meter, SUN(Smart energy Utility Network)와 같은 AMI(Advanced Metering Infrastructure) 기반 환경에서 수많은 전력 또는 수도 가스 사용량과 같은 데이터를 수집, 취득하고, 이들 데이터를 처리, 가공, 분석하여 가치 있는 정보로 변환시켜, 요금서비스 및 다양한 부가서비스 창출에 활용되는 소프트웨어 인프라이다. 최근 MDMS 개발은 기능의 중요성 뿐만 아니라 다른 응용 시스템들과의 상호 운용성을 고려하여 개발하는 요구 기능을 가진다. 본 논문에서는 스마트그리드 환경에 적합한 AMI의 전력처리시스템(MDMS) 개발을 위한 설계 방안을 기술하였다.