• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.349-349
• /
• 2010

전달 경로 해석 기법은 NVH 문제 해결 프로세스에서 자주 사용되는 기법으로서 소음원 X 전달 경로= 응답 모델을 사용한 접근방식입니다. 수음(응답)점에서 문제의 진동 및 소음 응답을 고체 및 공기 음원이 응답에 미치는 기여도 또는 개별 경로, 모드, 판넬 기여도의 합으로 세분화하여 표시함으로써, 문제의 원인을 규명하고, 문제 해결 및 대책 방안에 대한 통찰력을 제시하며, NVH 문제의 해결을 위해 사용되는 필수적인 도구입니다. 본 강좌에서는 건물에 설치되는 설비의 작동 시 고체 음원 평가 및 철도 소음의 공기음과 구조음 기여도 평가를 위해 적용된 전달 경로 해석 기법 사례를 소개할 것입니다. 설비 작동시의 전달 경로 해석 기법에 의해 평가된 고체 음원의 신뢰성 확보를 위하여 $\bullet$ 직접 측정된 하중 데이터와 역행렬 기법에 의해 예측된 하중 비교 및 $\bullet$ 가진 햄머로 가진시의 가진력과 측정된 가속도 신호를 사용하여 역행렬 기법으로 계산된 하중의 비교를 수행하였습니다. 철도 소음의 공기음 및 고체음 기여도 평가를 위해서는 $\bullet$ 열차 주행중 철로에서 측정된 가속도를 사용하여 철로면에 가해지는 하중을 역행렬 기법으로 계산하였으며 $\bullet$ 철로 주변에서 거리별 측정된 소음중, 고체음의 기여도 파악을 위해서, 전달 경로 해석기법으로 예측된 고체음과 측정된 소음을 비교하였습니다.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.2 s.69
• /
• pp.267-274
• /
• 2004

The objective of this study is to evaluate tensile load transmission capacity of H-shaped beam about design load by stud connector. The basic test of stud connecter was conducted and two specimens of full-scale size were tested under monotonic tensile loading condition. The parameter of tests is the size of the H-shaped beams. The results show that tensile load transmission capacity of H-shape beam about design load by stud connectors is excellent observing to the design code of steel structures of Architectural Institute of Korea.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.6 s.67
• /
• pp.639-648
• /
• 2003

The objective of this study is to evaluate in-plane and out-of-plane moment transmission capacity of H-shaped beams about design load by stud connector. Four specimens were tested under monotonic moment loading condition in each case to evaluate those. The parameter of tests is the size of the H-shaped beams. The results show that moment transmission capacity of H-shape beams in the serviceability limit state by stud connectors is excellent observing to the design code of steel structures of Architectural Institute of Korea.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.2_spc
• /
• pp.275-289
• /
• 2020

In 2017, multimodal transportation tests for evaluating road, sea, and rail transport were performed by research institutes in the US, Spain, and the Republic of Korea. In this study, acceleration and strain data determined through road and sea tests were analyzed. It was investigated whether the load generated for each transport mode was amplified or attenuated according to the load transfer path. From the results, it was confirmed that the load transfer characteristics differed according to the transportation mode and loading path. The effects of strain determined through each test on the structural integrity of the spent nuclear fuel were also investigated. It was found that the magnitude of the measured strain had a negligible effect on the structural integrity of the spent nuclear fuel, considering its fatigue strength. The results for the acceleration and strain data analyses obtained in this study will be useful for scheduled domestic transportation tests under normal transport conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.35-40
• /
• 2020

The ballast layers play a key role in distributing and supporting a trainload. On the other hand, it settles down by dynamic train loading due to large void ratios. Consequently, it requires continuous maintenance. In this paper, ballast layers mixed with three types of specially shaped artificial ballast (AB) (Rectangular, Tetrapod, Hexagonal) were modeled by using a two dimensional DEM (Discrete Element Method). Repeated loading tests were performed to evaluate the settlement behavior of the ballast layers. The smallest settlement was observed in the case of the ballast layer mixed with Tetrapod AB than in other cases, according to an analysis of the force transfer routes. In addition, contact force analysis showed that the Tetrapod AB, which has a concave shape, could easily make small and multi-channel force-transfer routes. This means that the stress in the ballast layer by the train loading transferred through the sleeper uniformly was distributed well by the AB. Therefore, the settlement of the ballast layer mixed with the concave-shaped Tetrapod AB could be reduced effectively under a repeated train loading. The effects of a decrease in settlement of the ballast layer highlight the possibility of a maintenance-free ballasted track.

• Journal of Drive and Control
• /
• v.19 no.4
• /
• pp.77-84
• /
• 2022

The aims of this study was to estimate transfer force delivered to cone crusher housing and contribution of force transmission. The rock crushing condition caused vibrations in the cone crusher housing, which were experimentally measured, and frequency response functions (FRF) were also found through modal impact tests. Vibration data and frequency response functions were applied to the transfer path analysis (TPA) model. Next, transfer forces delivered to the cone crusher housing were quantified via the TPA method. Contribution of force transfer was also analyzed based on force estimation results. Finally, this study describes basic concepts and components of the TPA method and reviews its applicability to rotating machinery that experiences impact vibrations and forces.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.04b
• /
• pp.449-453
• /
• 1994

공작기계의 가공정밀도는 공구와 공작물간의 상대변위 크기로서 평가되는데, 이 상대변위는 가공중에 발생 하는 절삭력이 공구-척-주축-기계구조물-안내면-가공테이블-공작물로 이어지는 하중전달 폐곡선을 흐르면서 경로상의 정적, 동적 취약부의 주된 영향을 받아 생기거나 각 요소부품의 변형이 누적되어 생겨난다. 본 연구에서는 주축의 취약부를 규명하기 위하여 정적으로는 정적 처짐곡선을 이용하고, 동적으로는 진동모우드의 굽힘곡선을 이용하여 주축선단의 처짐에 가장 영향을 많이주는 부위를 파악하였다. 취약부의 개선방법으로는 주축지름을 변화시켜 주축선단 근처에서 굽힘이 집중되지 않도록 유도하였다. 그리고 구조개선의 효과를 확인 하기 위해서 기존 주축시스템과 개선 주축시스템의 정적, 동적 특성변화를 비교하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.8
• /
• pp.773-780
• /
• 2009

The facility equipments generate dynamic force on building floor and the force can be measured with force transducer. However, this method depends on the measuring capacity or range of sensor, or mounts installation condition of equipments. Because of this restricting condition on force measuring system, this paper suggests a indirect method, the TPA(transfer path analysis) method, that produces a closely approximate dynamic force of equipments. This method calculates the dynamic force by using transfer response function. Firstly, the calculated dynamic force of impact load and continuous load was respectively compared with the sensor-measured value to examine the accuracy of TPA method. After that, the dynamic force and response induced by large facility equipments - a cooling tower, AHU and a large ventilator - were calculated by TPA method and the validity of these value were examined.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.452-457
• /
• 2008

In this paper, the vibrations of floor systems of which buildings are under construction are studied by experimental and analysis method. The first step is to measure the operational response data and FRF at the supporting points of the utility and the second step is to calculate the dynamic load by TPA Method which provided by LMS VirtualLab System Analysis Module. The dynamics we used to identify is expressed by below equation; $$\{F_{oper}\}=[H]^{-1}\;{\cdot}\;\{{.. \atop x_{oper}}\}$$ Where, H(Transfer function between position of the force and response) and x(response) are measured by vibration test.

• Journal of Drive and Control
• /
• v.16 no.2
• /
• pp.1-7
• /
• 2019

Jaw crusher is a device that breaks rock collected from mines or quarries to produce aggregates of the size desired by user. A representative method for measuring load is to measure them by attaching force sensors directly to the part where the load is generated. However, the direct method has many limitations such as high-impact loads generation in equipment or space constraints, sensor capacities and costs. Therefore, Transfer Path Analysis (TPA) was used to indirectly measure impact loads by attaching acceleration sensors. In this study, both direct and TPA methods were used to measure the impact load of Jaw crusher. This study finally quantifies the impact of the load generated by the Jaw crusher using direct method and TPA method, and comparing the impact load measured calculated the derive the error rate.