• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.187.2-187.2
• /
• 2014

최근 다양한 카본 나노소재들이 열 전도성 필러로써 고분자 복합체의 열전도도 향상을 위해 연구되고 있다. 그러나 구조적 이방성을 갖는 탄소나노튜브(CNT) 혹은 그래핀나노플레이트(Graphene Nanoplatelet)를 복합체에 적용할 경우, 복합체의 수직 방향과 수평 방향에서의 열전도도가 3배 이상 차이가 나는 문제가 있다. 따라서 본 연구에서는 2차원의 GNP 표면 위에 1차원의 CNT를 직접 성장시킨 하이브리드 탄소소재를 이용하여 이러한 열전도도 이방성을 개선하고자 하였다. 하이브리드 탄소소재는 무전해 도금법과 열기상법으로 제조하였다. 합성된 하이브리드 탄소소재 및 CNT를 단독 혹은 혼합하여 필러를 만들고 이를 에폭시 기지 내에 분산시켜 복합체를 제작하였다. 필러 함량별, 필러 비율별로 제작된 복합체의 열전도도를 레이저 플래시 법으로 측정 비교하였다. 결과적으로 기존의 단일 필러들보다 열전도도 이방성이 1.5배 이상 개선된 방열용 에폭시 복합체를 제작할 수 있었다. 한편 하이브리드 탄소와 2% 이하의 CNT 배합에서 단독 필러 투입에 비해 45% 이상의 열전도율 향상을 확인하였다. 이는 미세구조 분석 및 성분 분석 결과, 필러 분산 정도가 열전도도 향상의 주요 인자로 작용하는 것을 확인하였고 기지 내 CNT가 열전도도 경로로 작용하기보다는 하이브리드 탄소소재의 균일한 분산에 영향을 준 것으로 사료된다.

• Korean Journal of Materials Research
• /
• v.6 no.4
• /
• pp.428-435
• /
• 1996

초미립 SiC분말과 SiC platelet을 2차성으로 Si3N4에 첨가하여 SiC/Si3N4 하이브리드 복합체를 가압소결로 제조한 후 2차상의 영향을 조사한 결과핫프레스법을 이용한 경우 SiC platelet은 Si3N4 기지 복합채의 치밀화를 저해하지 않고 초미립의 SiC 첨가는 Si3N4의 입성장을 효과적으로 억제하여 미세한 $\beta$-Si3N4의 grain을 형성함을 관찰하였다. 초미립 SiC첨가를 통한 복합체의 강도 증진은 상대적으로 $\beta$-Si3N4입자의 미세화에 의한 인성의 저하를 유도하나 SiC platelet을 첨가하여 급격한 강도 저하 없이 높은 인성을 갖는 하이브리드 복합체를 제조할 수 있었으며 SiC/Si3N4 하이브리드 복합체의 인성증진은 elongated $\beta$-Si3N4와 platelet SiC의 debonding에 의한 grain pull-out 영향임을 알 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.323-323
• /
• 2008

Hydro-thermal 방법으로 만들어진 200nm, 300nm, 400nm, 500nm의 $BaTiO_3$를 800 ~ $1100^{\circ}C$ 범위에서 하소하여 하소온도에 따른 결정 구조, 비표면적, 입경의 크기를 조사하였다. 고유전율이면서 안정적 전기적 특성을 가지는 하이브리드 복합체를 만들기 위하여 에폭시와 경화제에 분말의 크기와 하소 온도를 달리한 $BaTiO_3$를 혼합하여 전기적 특성을 조사하였다. 연구 결과 분말의 크기에 의한 영향보다는 하소온도에 따른 영향이 크게 나타남을 볼 수 있었다. 이와 같은 결과는 하소 온도가 증가할 수록 유전체 분말의 응집이 많이 발생하고 이를 에폭시와 혼합시 유전체 함량에 의한 영향보다는 체적비 영향을 크게 받아 나타난 결과로 예상된다.

• Applied Chemistry for Engineering
• /
• v.34 no.1
• /
• pp.57-63
• /
• 2023

In this study, an organic-inorganic hybrid composite of Abaca nanocellulose and titanium dioxide was prepared. Abaca nanocellulose was prepared by oxidizing Abaca cellulose using TEMPO (2,2,6,6-tetramethyl-piperidine-1-oxyl) as a catalyst. Titanium dioxide nanoparticles were prepared by the sol-gel method, and a composite was prepared by hybridizing them with nanocellulose. As a result of comparing the properties of the composite and its physical properties according to the change in manufacturing pH, the effect of pH was very large when combining nanocellulose and titanium dioxide, and the optimal bonding performance was shown at pH 8 in this experimental condition. In addition, the prepared composite showed photocatalytic properties, and the higher the content of titanium dioxide, the higher the hydrophilicity of the composite according to UV light irradiation.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.34-40
• /
• 2013

Commercially available polyamide thermoplastic elastomer (PA-TPE) was blended with hybrid filler which was prepared by means of the reaction between polyhedral oligomeric silsesquioxane (POSS) containing amine group and toluene diisocyanate (TDI)-caprolactam (CL) to explore the effect of blending the hybrid filler with the TPE. The chemical structure of the filler was identified by using FTIR and $^1H$ NMR. The composites, PA-TPE/POSS-(TDI+CL), which were the blends of TDI+CL modified POSS filler and PA-TPE up to 7 wt%, showed better elastic recovery delivered from lower tension setting compared to the PA-TPE and the PA-TPE/octaphenyl POSS blend. In addition the tensile strength and the initial modulus increased with increasing the hybrid filled content. Consequently it was assumed that the POSS-(TDI+CL) filler was a suitable material for enhancing strength and modulus without loss of elastic properties for the original PA-TPE.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.80-88
• /
• 2018

In this study, we prepared hybrid composites by using low temperature sol-gel process for transparent and hard coating film. The hybrid composites consist of $ZrO_2/TiO_2/organosilane$, of which organosilane was introduced 3-(trimethoxysilyl)propyl methacrylate due to the role of a photocurable ceramic material for low temperature process. The ceramic composites with various composition ratios were coated on a polycarbonate substrate using a sol-gel process of low temperature process, and characterized optical and mechanical properties of coated thin film. The transparencies of coated thin films were 97.5 % or more, and the pencil hardness were 9H or more. In the case of the ZTS-2-1, the nano-indentation hardness was measured at the highest value of 1.14 GPa.

• Journal of the KSME
• /
• v.57 no.5
• /
• pp.42-47
• /
• 2017

이 글에서는 신개념의 나노복합체 박막재료에 관하여 기계적 특성과 미세구조의 관계에 대해 기초적인 이해와 응용에 대하여 소개하였으며 적용 및 응용에 대해 기술하였다.

• Composites Research
• /
• v.23 no.4
• /
• pp.35-43
• /
• 2010

The purpose of this paper is to develop a Hybrid Fiber-reinforced High Strength Lightweight Cementitious Composite (HFSLCC) incorporated with lightweight filler and hybrid fibers for lightness and high ductility. Optimal ingredients and mixture proportion were determined on the basis of the micromechanical analysis and the steady-state cracking theory considering the fracture characteristics of matrix and the interfacial properties between fibers and matrix. Then 4 mixture proportions were determined according to the type and amount of fibers and the experiment was performed to evaluate the mechanical performance of those. The HFSLCC showed 3% of tensile strain, 4.2MPa of ultimate tensile stress, 57MPa of compressive strength and $1,660kg/m^3$ of bulk density. The mechanical performance of HFSLCC incorporated with PVA fibers of 1.0 Vol.% and PE fibers of 0.5 Vol.% is similar to those of the HFSLCC incorporated with fibers of 2.0 Vol.%.

• Elastomers and Composites
• /
• v.44 no.1
• /
• pp.34-40
• /
• 2009

New coupling agent or surface modified agent (9-decenoic acid) was used to enhance the compatibility between silica and polystyrene in silica/polystyrene hybrid nanocomposite, synthesized by in situ miniemulsion polymerization. Composites contain well dispersed nanosize silica particles. Related tests and analyses confirmed the success of synthesis. Functionalization of silica by 9-decenoic acid and silica on the polystyrene was confirmed by FTIR. TGA showed presence and amount of silica in final latex. The glass transition temperature of the hybrid nanocomposite was increased with the silica amount. SEM and TEM analysis showed the spherical morphology of PS and composite with an average diameter of 55 nm. The presence of silica within composite was confirmed by EDS attached to the existing TEM.

• Journal of the Korea Concrete Institute
• /
• v.19 no.2
• /
• pp.153-161
• /
• 2007

This paper investigates the lap splice performance of structural steel bars embedded in high performance fiber reinforced cementitious composite(HPFRCC) with various matrix ductilities. Matrix ductility is governed fiber type and fiber volume fraction. Fiber types were polypropylene(PP), polyethylene(PE) and hybrid fiber[polyethylene fiber+steel cord(PE+SC)]. The lap splice length$(l_d)$ was calculated according to the relevant ACI code requirements for reinforcing bars in normal concrete. As the result of tests, lap splice strength of HPFRCC using PE1.5 and hybrid fiber increased by up to $82{\sim}91$ percent more than that of concrete. Splice strength and energy absorption capacity of PE0.75+SC0.75 or PE1.5(fiber volume fraction 1.5%) specimen increased more than that of PP2.0(fiber volume fraction 2.0%) specimen. Therefore lap splice performance depends on fiber tensile strength and Young's modulus more than fiber volume fraction. Also, HPFRCC appear multiple crack and ductile postpeak behavior due to bridging of fiber in cementitious composite.