• Journal of Internet Computing and Services
• /
• v.11 no.4
• /
• pp.11-22
• /
• 2010

In case that group communication protocols assume every process is interested in all events occurring in a large scale group, the events multicasting to a subset of a large process group, such as a sensor network, potentially varying for every event based on their interests might lead to very high communication overhead on each individual process. Moreover, despite the importance of both guaranteeing message delivery order and supporting overlapped group using gossip based group communication for multicasting in sensor or P2P networks, there exist little research works on development of gossip-based protocols to satisfy all these requirements. In this paper, we present a new gossip-based causal message order guaranteeing multicast protocol based on local views and delegates representing subgroups and fully utilizing multi-group features to improve scalability. In the proposed protocol, the message delivery order in overlapped groups has been guaranteed consistently by all corresponding members of the groups including delegates. Therefore, these features of the proposed protocol might be significantly scalable rather than those of the protocols guaranteeing atomic order dependencies between multicast messages by hierarchical membership list of dedicated groups like traditional committee protocols and much stronger rather than fully decentralized protocols guaranteeing dependencies between multicast messages based on only local views. And the proposed protocol is a hybrid approach improving the inherent scalability of multicast nature by gossip-based technique in all communications.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.5
• /
• pp.345-353
• /
• 2003

When designing network processors or implementing network equipments such as routers are implemented, IP lookup operations cause the major impact on their performance. As the organization of the IP address becomes simpler, the speed of the IP lookup operations can go faster. However, since the efficient management of IP address is inevitable due to the increasing number of network users, the address organization should become more complex. Therefore, for both IPv4(IP version 4) and IPv6(IP version 6), it is the essential fact that IP lookup operations are difficult and tedious. Lots of researcher for improving the performance of IP lookups have been presented, but the good solution has not been came out. Software approach alleviates the memory usage, but at the same time it si slow in terms of searching speed when performing an IP lookup. Hardware approach, on the other hand, is fast, however, it has disadvantages of producing hardware overheads and high memory usage. In this paper, conventional researches on IP lookups are shown and their advantages and disadvantages are explained. In addition, by mixing two representative structures, a new hybrid parallel architecture for fast IP lookups is proposed. The performance evaluation result shows that the proposed architecture provides better performance and lesser memory usage.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.477-480
• /
• 2002

Si-O-C(-H) thin film with a tow dielectric constant were deposited on a P-type Si(100) substrate by an inductively coupled plasma chemical vapor deposition (ICPCVD). Bis-trimethylsilymethane (BTMSM, H$_{9}$C$_3$-Si-CH$_2$-Si-C$_3$H$_{9}$) and oxygen gas were used as Precursor. Hybrid type Si-O-C(-H) thin films with organic material have been generated many voids after annealing. Consequently, the Si-O-C(-H) films can be made a low dielectric material by the effect of void. The surface characterization of Si-O-C(-H) thin films were performed by SEM(scanning electron microscope). The characteristic analysis of Si-O-C(-H) thin films were performed by X-ray photoelectron spectroscopy (XPS).

• Proceedings of the CALSEC Conference
• /
• 1999.11a
• /
• pp.529-534
• /
• 1999

전자상거래는 구매자와 판매자 모두에게 많은 이점을 제공할 수 있어 최근 이에 관한 연구들이 많이 진행되고 있다. 특히 중소제조업체의 경우, 전자상거래라는 경영환경의 변화는 새로운 기회로 다가오고 있어, 상대적으로 기술력이 취약한 중소제조업체의 전자상거래를 지원하기 위한 요소 기술들의 개발 필요성이 점차 부각되고 있다. 이에 본 연구에서는 중소 금형제조업체의 판매과정을 사이버 공간에서 수행할 수 있는 전자상거래 기술을 개발하였다. 일반적으로 변화하는 경영환경에서는 생산과 관련된 계획과 통제가 보다 더 신속하고 정확하게 이루어져야 한다. 즉 전자상거래 환경에서의 제조업체는 구매자가 요구한 제품의 생산과 납기일을 맞추어 줄 수 있는지의 여부를 실시간으로 응답할 수 있어야 한다. 나아가서 인터넷을 통해 접수된 주문들은 해당 제조업체의 생산능력을 초과할 수 있는데 이 때에는 접수된 주문들 중에서 자사의 이익을 극대화할 수 있는 주문집합을 선별하여 접수여부를 결정해야 한다. 이와 같이 전자상거래 환경하에서의 제조업체는 생산과 관련된 정보를 신속하게 전달 받아 주문접수여부에 관한 의사결정을 올바르게 수행하는 것이 중요한데 본 연구에서는 중소 금형제조업체의 일정계획 및 주문처리를 위한 일정계획 기반의 선정 에이전트의 구조와 방법론을 제시하였다. 지금까지 일정계획에 관한 연구들은 대부분 납기일의 만족과 비용의 최소화 측면을 위주로 다루었다. 그러나 본 연구에서의 문제는 비용의 최소화보다는 납기일을 준수하면서 가장 많은 이익을 가져다 줄 수 있는 최적주문집합을 선정하는 문제를 다루고있다.자료를 수집하고, 통계분석 패키지를 이용하여 자료를 분석하였다. 방식을 결합한 하이브리드 형태이다.인터넷으로 주문처리하고, 신속 안전한 배달을 기대한다. 더불어 고객은 현재 자신의 물건이 배달되는 경로를 알고싶어 한다. 웹을 통해 물건을 주문한 고객이 자신이 물건의 배달 상황을 웹에서 모니터링 한다면 기업은 고객으로 공간적인 제약으로 인한 불신을 불식시키는 신뢰감을 주게 된다. 이러한 고객서비스 향상과 물류비용 절감은 사이버 쇼핑몰이 전국 어디서나 우리의 안방에서 자연스럽게 점할 수 있는 상황을 만들 것이다.SP가 도입되어, 설계업무를 지원하기위한 기본적인 시스템 구조를 구상하게 된다. 이와 함께 IT Model을 구성하게 되는데, 객체지향적 접근 방법으로 Model을 생성하고 UML(Unified Modeling Language)을 Tool로 사용한다. 단계 4)는 Software Engineering 관점으로 접근한다. 이는 최종산물이라고 볼 수 있는 설계업무 지원 시스템을 Design하는 과정으로, 시스템에 사용될 데이터를 Design하는 과정과, 데이터를 기반으로 한 기능을 Design하는 과정으로 나눈다. 이를 통해 생성된 Model에 따라 최종적으로 Coding을 통하여 실제 시스템을 구축하게 된다.the making. program and policy decision making, The objectives of the study are to develop the methodology of modeling the socioeconomic evaluation, and b

• Cartoon and Animation Studies
• /
• s.39
• /
• pp.157-182
• /
• 2015

Mr. Folman, an Israeli director, used a highly stylized form of animation in a decidedly adult way to make his documentary about the 1982 war in Lebanon, "Waltz With Bashir," in 2008. After 5 years, he has used another distinctive approach, fusing animation with live action in his latest film, a trippy and surreal undertaking called "The Congress." He dismantled the means through parodies, the core of post-modernism art and built a new meaning to create a unique world view and unique aesthetics. In this study, parodies of the modern concept of post-modernism being used as a major strategy in the creation of art have appeared the four characteristics of post-modern parody: 1) intertextuality, 2) dissolution and fusion of genres, and 3) strengthening of irony, and 4) pastiche. This study is characteristic of post-modern parody that discusses the relevance of contemporary parody and postmodernism being developed by analyzing how they appear on the practical work. Furthermore, through analysis of "The Congress", this study discusses the post-modernist world view and the creative way of creating an experimental art with parody.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.86-92
• /
• 2016

A high-capacity battery installed in a hybrid vehicle or electric vehicle is used to power, or as a power supply for, electric sub-assemblies. In order to use a high-capacity battery as a power supply for electric sub-assemblies, such as an electronic control unit or for lighting, radio, and navigation, there is a need for a DC converter that changes a high voltage of 240-400V to a low voltage of 12-14V, which is done with a low-voltage DC-DC converter (LDC). An LDC undergoes long-term aging so as to reduce latent defects in the production process. With regard to the usual aging method, an LDC is a DC-DC converter. So, a DC power supply is connected and used as input, and a programmable DC electronic load is the output. For stable operation, a product having a larger capacity by 10% (compared to an LDC) is used, and has a structure where electric power is dissipated into 100% heat. So, there is a problem with volume, based on the use of two pieces of equipment to test the LDC, and another problem based on the generation of heat in the programmable DC electronic load. Hence, this paper suggests a load test method as a way of recycling, where a significant portion of the electricity dissipated as heat in a load tester is returned as input. The method realizes savings of 80% or more in the electricity dissipated as heat through improvement in the efficiency of the recycling load tester.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.527-535
• /
• 2017

Heat management is one of the most critical issues in Polymer Electrolyte Membrane Fuel Cells (PEMFCs) installed inside the fuel cell power pack of a fuel cell battery hybrid UPS. If the heat generated by the chemical reaction in the fuel cell is not rapidly removed, the durability and performance of the fuel cell may be affected, which may shorten its lifetime. Therefore, the objective of this study is to select and propose a proper cooling method for the fuel cells used in the fuel cell power pack of a UPS. In order to find the most appropriate cooling method, the various design factors affecting the cooling performance were studied. The numerical analysis was performed by a commercial program, i.e., COMSOL Multiphysics. Firstly, the surface temperature of the 1 kW class fuel cell stack with the cooling fans placed at the top was compared with the one with the cooling fans placed at the bottom. Various rotation speeds of the cooling fan, viz. 2,500, 3,000, 3,500, and 4,000 RPM, were tested to determine the proper cooling fan speed. In addition, the influence of the inhaled air flow rate was investigated by changing the porous area of the grille, which is the entrance of the air flowing from the outside to the inside of the power pack. As a result, it was found that for the operating conditions of the 1 kW class PEMFC to be acceptable, the cooling fan was required to have a minimum rotating speed of 3500 RPM to maintain the fuel cell surface temperature within an acceptable range. The results of this study can be effectively applied to the development of thermal management technology for the fuel cells inside the fuel cell power pack of a UPS.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.7
• /
• pp.191-198
• /
• 2021

Since the size of training dataset become large and the model is getting deeper to achieve high accuracy in deep learning, the deep neural network training requires a lot of computation and it takes too much time with a single node. Therefore, distributed deep learning is proposed to reduce the training time by distributing computation across multiple nodes. In this study, we propose hybrid allreduce strategy that considers the characteristics of each layer and communication and computational overlapping technique for synchronization of distributed deep learning. Since the convolution layer has fewer parameters than the fully-connected layer as well as it is located at the upper, only short overlapping time is allowed. Thus, butterfly allreduce is used to synchronize the convolution layer. On the other hand, fully-connecter layer is synchronized using ring all-reduce. The empirical experiment results on PyTorch with our proposed scheme shows that the proposed method reduced the training time by up to 33% compared to the baseline PyTorch.

• Journal of the Korean Society of Earth Science Education
• /
• v.15 no.2
• /
• pp.285-298
• /
• 2022

This study is to investigate the effects and characteristics of science and engineering integrated lessons on elementary students' creative engineering problem solving propensity (CEPSP). The science and engineering integrated lessons used in this study was a 10 lesson-hours STEM program, co-developed by University of Minnesota and Purdue University. The program was implemented in the 6th grade science class of H Elementary School located in P Metropolitan city. The main data of this study are the pre-post CEPSP result and interview with 5 students collected before and after the research. The CEPSP result was analyzed by a paired-sample t-test and hierarchical cluster analysis. As a result of the t-test, it was found that overall, the program has a positive effect on the students' CEPSP score. As a result of cluster analysis, it was confirmed that studnets' CEPSP could be classified into two groups (lower and higher score cluster). Five students whose, CEPSP score has significantly improved after the lessons were interviewed to find out what the characteristics of the program that contribute the significant change are. As a result of conducting centroid analysis of the interview transcription and the hybrid analysis method, it was found that the meaningful experiences that the five students commonly shared were 'problem solving through collaboration' and 'through repeated experiments (redesign)', problem solving' and 'utilization of scientific knowledge'. As minor reactions, 'choice of the best experimental method' and 'difference between science and engineering' appeared.

• Korea Science and Art Forum
• /
• v.25
• /
• pp.463-475
• /
• 2016

As the transition to the digital age in the late 20th century, the intrinsic value of the craft, the emotional values of human, has been noticed as an alternative to overcome the adverse effects of the modernism of the industrial age. To introduce experimental tries which convergence of contemporary technologies and elements of traditional craft, and to inspire artists and present the new possibility of creation to them who want to take advantage of craft emotion as the elements of creation is the purpose of this study in the current digital technology age. First, the meaning and value of craft in modern times and digital media and hybrid creation environments are theoretically investigated based on previous studies and literature. Second, design cases produced by combining digital technology as a tool and craft elements are classified for substantial understanding of the design. Thirdly, identify the design characteristics presented through case studies and suggest the new possibility of creation. The results of the study are as follows. Reject typical types highlight the functional role and try free express conversion, e.g. form, material, texture, making process etc. Extracts the various elements that can be applied and search combining ways, because the convergence of digital technology and the craft is sufficient to activate the human emotion. Interaction between the craft and the digital medium is made actively. Craft accepts digital form, the craft appeared again as the contents of the digital. the traditional and digital method appropriately fused and utilized depending on the situation in process.