Browse > Article
http://dx.doi.org/10.5762/KAIS.2017.18.4.527

A Study on Numerical Analysis for Internal PEMFC Cooling of Power Pack for UPS  

Song, Jun-Seok (Department of Mechanical Engineering, Chonnam National University)
Kim, Byeong-Heon (Division of Special equipment, Chunnam Techno University)
Publication Information
Journal of the Korea Academia-Industrial cooperation Society / v.18, no.4, 2017 , pp. 527-535 More about this Journal
Abstract
Heat management is one of the most critical issues in Polymer Electrolyte Membrane Fuel Cells (PEMFCs) installed inside the fuel cell power pack of a fuel cell battery hybrid UPS. If the heat generated by the chemical reaction in the fuel cell is not rapidly removed, the durability and performance of the fuel cell may be affected, which may shorten its lifetime. Therefore, the objective of this study is to select and propose a proper cooling method for the fuel cells used in the fuel cell power pack of a UPS. In order to find the most appropriate cooling method, the various design factors affecting the cooling performance were studied. The numerical analysis was performed by a commercial program, i.e., COMSOL Multiphysics. Firstly, the surface temperature of the 1 kW class fuel cell stack with the cooling fans placed at the top was compared with the one with the cooling fans placed at the bottom. Various rotation speeds of the cooling fan, viz. 2,500, 3,000, 3,500, and 4,000 RPM, were tested to determine the proper cooling fan speed. In addition, the influence of the inhaled air flow rate was investigated by changing the porous area of the grille, which is the entrance of the air flowing from the outside to the inside of the power pack. As a result, it was found that for the operating conditions of the 1 kW class PEMFC to be acceptable, the cooling fan was required to have a minimum rotating speed of 3500 RPM to maintain the fuel cell surface temperature within an acceptable range. The results of this study can be effectively applied to the development of thermal management technology for the fuel cells inside the fuel cell power pack of a UPS.
Keywords
Cooling; CFD; Heat Transfer; PEMFC; Power Pack;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 J. Ke, R. Xinbo, Y. Mengxiong, X. Min, "A Hybrid Fuel Cell Power System", IEEE Transactions, Vol. 56, pp. 1212-1222, 2009. DOI: https://doi.org/10.1109/TIE.2008.2008336
2 F. Barbir, "PEM Fuel Cells: Theory and Practice", ELSEVIER, Burlington, 2005.
3 W. A. N. Mohamed, R. Atan, "Computational Analysis On Thermal Performance And Coolant Flow Of An Air-Cooled Polymer Electrolyte Membrane Fuel Cell", Journal of Mechanical Engineering, Vol. 7, No. 2, pp. 15-36, 2010.
4 W. A. N. Mohamed, R. Atan, A. Ismail, "Heat Transfer Simulation of a Single Channel Air-Cooled Polymer Electrolyte Membrane Fuel Cell Stack with Extended Cooling Surface", International Conference on Science and Social Research, pp. 91-96, 2010. DOI: https://doi.org/10.1109/cssr.2010.5773920
5 J. Scholta, M. Messerschmidt, L. Jorissen, C. Hartnig, "Externally cooled high temperature polymer electrolyte membrane fuel cell stack", Journal of Power Sources, Vol. 190, No. 1, pp. 83-85, 2009. DOI: https://doi.org/10.1016/j.jpowsour.2008.10.124   DOI
6 K. P. Adzakpa, J. Ramousse, Y. Dube, H. Akremi, K. Agbossou, M. Dostie, A. Poulin, M. Fournier, "Transient air cooling thermal modeling of a PEM fuel cell", Journal of Power Source, Vol. 179, No. 1, pp. 164-176, 2008. DOI: https://doi.org/10.1016/j.jpowsour.2007.12.102   DOI
7 C. Spitta, J. Mathiak, M. Kokupil, A. Heinzel, Coupling of a Small Scale hydrogen Generator and a PEM Fuel Cell, WILEY-VCH Verlag, Weinheim, 2007.
8 www.nuritech21.com
9 S. T. Hwang, S. H. Cheon, J. S. Song, Y. H. Yun, B. H. Kim, X. Zhang, D. U. Kim, D. Hyun, B. S. Oh, "A Study to Improve PEMFC Performance by Using Electro Polishing and CrN Coating on Metal Bipolar Plate", Transaction of KSAE, Vol. 22, No. 4, pp. 65-71, 2014. DOI: https://doi.org/10.7467/ksae.2014.22.4.065
10 A. Faghri, Z. Guo, "Integration of Heat Pipe into Fuel Cell Technology", Heat Transfer Engineering, Vol. 29, No. 3, pp. 232-238, 2008. DOI: DOI: https://doi.org/10.1080/01457630701755902   DOI
11 R. D. Blevins, Applied Fluid Dynamics Handbook, Van Nostrand einhold, 1984.
12 M. Matian, A. Marquis, N. Brandon, "Model based design and test of cooling plates for an air-cooled polymer electrolyte fuel cell stack", International Journal of Hydrogen Energy, Vol 36, pp. 6051-6066, 2011. DOI: https://doi.org/10.1016/j.ijhydene.2011.01.026   DOI
13 S. Shahsavari, A. Desouza, M. Bahrami, E. Kjeang, "Thermal analysis of air-cooled PEM fuel cells", International Journal of Hydrogen Energy, Vol. 37, pp. 18261-18271, 2012. DOI: https://doi.org/10.1016/j.ijhydene.2012.09.075   DOI