• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.5
• /
• pp.458-461
• /
• 2004

In order to improve the adhesion properties of copper, MPS(3-mercaptopropyltrimethoxysilane) organic film were employed. The plasma pretreatment in pure He or $He/O_{2}$ mixed gas environment greatly increased adhesion force. Adhesion force was measured by scratch test with nano indenter. Microstructures and surface roughness were observed with scanning electron microscope(SEM). The characteristics of MPS layer for pretreatment were studied with flourier transform infrared spectroscope(FT-IR) and contact angle tester. The heighest adhesion was achieved in the specimen pretreated with mixed plasma and NPS coating, which was 56mN. Other specimen showed lower value by $20{\%}$ to $30{\%}$. The roughness of substrate was not affected by the bonding strength of copper plating.

• Korean Journal of Environment and Ecology
• /
• v.18 no.4
• /
• pp.351-358
• /
• 2004

This study was achieved to investigate the distribution state and the characteristic of Ageratina altissima community in five districts(90.15$\textrm{km}^2$), north of Seoul, Korea. Total distribution area of Ageratina altissima community was 1,860,805$m^2$ and the distribution rate of Ageratina altissima community was 23.7% in Yongsan-gu, Seoul and it was 13.7% in Joong-gu, Seoul including the Namsan-mountain. As a result of correlation between Ageratina altissima community and the actual vegetation, in case of the whole sites Ageratina altissima community was distributed mainly in the Robinia pseudo-acacia forest and in case of Namsan-mountain area it was distributed mainly in the lower layer of the Pinus densiflora forest especially. In case of the whole sites, the distribution ratio of Ageratina altissima community was highest in the Pinus koraiensis forest; on the other hand, it was highest in the Robinia pseudo-acacia forest with planted area excepting the Namsan-mountain. As a result of correlation between Ageratina altissima community and Green Covered Ratio(GCR), the more the distribution ratio of Ageratina altissima community was heigher, the more GCR was higher in case of canopy and understory layer. Especially the distribution ratio of Ageratina altissima community was most high where GCR was over 50%. As a result of correlation between Ageratina altissima community and aspect, Ageratina altissima community was distributed mainly to the west, so we suppose that Ageratina altissima community was distributed mainly in the lower layer of the Robinia pseudo-acacia forest which has fine canopy in the west. We should improve the Robinia pseudo-acacia forest to multi-layer natural forest to control the flourishing Ageratina altissima community in the long term.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.3
• /
• pp.153-163
• /
• 2020

Mineral and geochemical analysis were conducted on two sections (~3.5 m) of red-brown claysilt sediments covering the gneiss and granite weathering zones in Suwon-si for establishing Quaternary paleoenvironmental changes in Korea. The sections were divided into four sedimentary layers (Unit 1-4) by vertical changes in mineral composition and chemical composition. The lowermost unit 1 was a sandy sediment with a high K-feldspar content with a significant contribution of weathered bedrock. Unit 2 was a transition layer showing intermediate characteristics. Unit 3 was a reddish brown clay-silt sediment, with a total clay content of 58% on average, and the main clay minerals were illite-smectite mixed layer minerals and hydroxy-interlayered vermiculite/smectite. Unit 3 contained almost no plagioclase, while the content of kaolin minerals derived by the plagioclase weathering was higher than in the other layers. Unit 4 had similar mineral composition and chemical properties to Unit 3, but had a higher content of plagioclase and chlorite and lower content of kaolin minerals. The chemical compositions of the sections were compared with those in other regions of Korea, suggesting the eolian origin of Units 3 and 4. The paleoenvironmental change in the sedimentary section of this region was interpreted as follows. Weathered products of gneiss and granite, which are bedrocks of this region, were eroded and deposited as sandy sediments in the periphery to form the lower layers (Unit 1, 2), followed by the deposition of the claysilty rich eolian sediments (Unit 3) during the glacial. Unit 3 was chemically weathered during the warm humid climate during the last interglacial, developing a reddish brown color. After that, a eolian sediment layer (Unit 4) was deposited during the last glacial.

• Korean Journal of Construction Engineering and Management
• /
• v.4 no.4 s.16
• /
• pp.155-163
• /
• 2003

There are a growing number of cases to expand balconies of apartments faced with open air in order to enhance functional satisfaction and efficiency of dwelling space. In case of the balcony expansion at the floor, however, it is difficult to exclude a possibility of bringing about internal condensation due to the difference of temperature between indoor air and outdoor air caused by the Inflow of outer low-temperature air through the upper part of ceilings by failure in completely putting together the outer composite wall panels on the aluminum curtain walls installed at outer walls This study is to forecast possible occurrence of internal condensation around parapets and H-beam located at the inside of balcony ceilings on the uppermost floor of super-high apartment buildings faced with open air in order to provide dwellers with more comfortable environment in the related space and get rid of their uneasiness about the condensation. In this study, we estimated internal condensation, which vary in accordance with humidity pressure distribution, at curtain walls, stone panels or lower parts of slabs that constitute outer space of the residence and are weak against heat, through temperature forecast and temperature distribution interpretation program at normal two-dimension temperature

• Journal of the Korean earth science society
• /
• v.25 no.8
• /
• pp.764-773
• /
• 2004

The soil in wildfire area Sacheon-myeon, Gangneung, Gangweon Province, Korea, were investigated to clarify pattern of the soils. The soils were classified into 5 types on the basis of vegetation, types of organic matter. thickness of soil horizons, and completeness of soil profile. Each type showed different erosion pattern and Landsat ETM image. Coverage of plant leaves, litter, root, ash and other organic matter was an important component that affected soil color and reflectance of Landsat image (digital number). Although the NDVI (Normalized Distribution Vegetation Index) method in the wildfire area did not show much difference in soil types, the applied supervised classification method showed characteristic pattern of Landsat ETM image of soil types. This study showed that the applied supervised Landsat TM image classification in wildfire area is an effective way to estimate the distribution of erosion pattern of soil in wildfire area.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.1 no.2
• /
• pp.39-48
• /
• 1997

New form of base isolators made of steel spring coated with both natural and artficial rubber were manufactured and tested for material properties. Shaking table experiments were performed using a model structure attached with the bearings. The model structure used in the test is a 1/4 scaled steel structure, and earthquake records were used to check the lateral and vertical stability and effectiveness of the isolators. According to the results all three types of isolators turned out to be effective in reducing the acceleration induced by the earthquake vibration.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.3
• /
• pp.349-356
• /
• 1986

For the extension of application in flash method measuring the thermophysical properties of materials, the heat diffusion equation with the heat transfer loss from front, rear, and circumferential surfaces of two layer cylinderical sample is mathematically analyzed by means of Green's function for axially symmetric pulse heating on the front of samples. The solutions are applied to determine the unknown thermal diffusivity of the two materials and analyzed the measurement error due to heat loss and finite pulse time effects.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.377-378
• /
• 2003

휘발성유기화합물(volatile organic compounds, 이하 'VOCs')은 대기 중에서 태양광선에 의해 질소산화물과 광화학적 산화반응을 일으켜 그 결과 지표면의 오존농도를 증가시켜 스모그(Smog) 현상을 초래시키는 모든 유기화합물을 일컫는다. 이러한 VOCs를 제거하기 위하여 여러 방법이 제시되고 있는데, 촉매를 이용하여 VOCs를 산화시켜 제거하는 촉매 산화법은 촉매사용으로 인하여 소각법에 비하여 조업온도를 많이 떨어뜨릴 수 있으므로, 에너지 소비의 절감과 이에 따른 제2의 오염물질의 배출이 거의 없다는 점에서 유리한 면을 갖고 있어 VOCs 제거에 가장 적합한 방법이라고 할 수 있다. (중략)

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1999-2003
• /
• 2009

우리나라는 기상학적으로 연중 총강수량의 약 2/3가 $6^{\sim}9$월에 편중해서 내리고 있고, 지형적으로 국토의 70% 이상이 산지로 구성되어 경사가 급해 수해를 입을 가능성이 매우 크다. 또한 산업화 및 도시화로 인해 불투수층의 증가로 강수량의 대부분이 직접유출로 기여해 강우초기에 노면상의 오염물질을 급속히 하천으로 이동시켜 오염을 가중시키고 있다. 강우-유출수 처리에 있어서 처리용량 산정 등에 이용될 수 있는 초기강우의 기준은 비점오염원 유출 연구에 있어서 대단히 중요한 요소이며, 지금까지 많은 연구자들에 많은 연구가 이루어져왔다. 그러나 유역을 구성하고 있는 토지피복에 따라 유출특성이 다르고 각각의 연구자들이 제안한 초기강우 기준이 명확하게 제시되지 못하고 있는 실정이다. 따라서 본 연구에서는 SOM(Self-Organizing Map)이론을 도입하여 본 연구의 시험유역에서 측정된 유출 및 수질자료에 대해 패턴분류를 수행하여 분할구역별 자료의 특성분석을 분석한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.19 no.3
• /
• pp.62-69
• /
• 1995

In order to investigate the effect of TiN coating on corrosion fatigue behavior of metal, the rotary bending corrosion fatigue tests were carried out in 3% NaCl solution by using the round bar specimens of high-speed steel, SKH-9, coated with TiN by PVD method. From the experimental results, fatigue strength of TiN coating steel in air was obvious improvement as compared with that of the substrate because of the restriction of dislocation movement in near surface of the substrate by hard thin film. In 3% NaCl solution, corrosion fatigue life of TiN coating specimen in high stress level was improvement same as in air. But in low stress level, corrosion fatigue life of TiN coating one was equivalent to that without coating, due to much crack initiated from corrosion pits formed at the substrate by failure of coating layer.