• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.61-62
• /
• 2014

To evaluate anti-corrosion performance of high-frequency arc metal spray film in accordance with metal type and epoxy sealing coat application status, electrochemical impedance spectroscopy(EIS) method was conducted in this study. As a result, in case of applying Al-Mg alloy metal spray film, it showed the best polarization resistance. In case of applying epoxy sealing coat, it showed increased polarization resistance of arc metal spray film. Through this experiment, it is judged that Al-Mg alloy arc metal spray film with epoxy sealing coat can increase the biggest anti-corrosion performance of high-frequency arc metal spray film on steel.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.68-75
• /
• 2018

The introduction of advanced water treatment facilities has increased as the conventional purification method cannot remove the substance clearly. However, the internal waterproofing and Anticorrosion materials of the advanced water treatment facility using ozone deteriorate due to the oxidation power of ozone and affects the concrete, which causes a decrease in durability. This study is to evaluate the ozone resistance according to the type of spray metal and the surface treatment method of the coating, and the bond strength after ozone treatment in order to develope a finishing method to prevent deterioration of concrete structure of water treatment facility using metal spraying method as a way to construct metal panel with excellent ozone resistance and chemical resistance by an easier way than the previous. The Experimental results show that spray metal Ti has superior ozone resistance even after spraying. It is considered to be the most suitable method for ozone resistance and bond performance by finishing using Teflon sealing as surface treatment method.

• Journal of Conservation Science
• /
• v.30 no.1
• /
• pp.1-11
• /
• 2014

Stabilization of iron artifacts is focused on desalination than corrosion inhibitors. However artifacts are not condition of desalination treatment must be applied to corrosion inhibitors. But iron artifacts is not representative of inhibitors which drug is most effective qualities have not been identified. Therefore in this study validates the effectiveness of existing inhibitors and its purpose is to suggest corrosion inhibitors for iron artifacts. In this study, Comparative experiment of corrosion inhibitors is selected BTA, DAN and MEA, TEA. This study was studied using Corrosion resistance test, Contact angle, XPS. As a result, all the samples treated with corrosion inhibitors was formed hydrophobic coating and was rising corrosion resistance. Also, the concentration of corrosion inhibitors was 3% better than 0.3%. BTA in the XPS experiment, the corrosive material to block the CH bond of the peak concentration was highly. This is considered corrosion potential is very high to see out the effect in the polarization experiment. Ethanolamine was superior to the MEA rather than in the TEA. MEA is likely to be appropriate in an outdoor iron artifacts seem to be suitable as corrosion inhibitors.

• Journal of Conservation Science
• /
• v.36 no.2
• /
• pp.82-92
• /
• 2020

Modern artworks are constructed using a variety of materials and techniques. Sculptures, which predominantly consist of metals, usually have different shapes and consist of different material mixtures. The structural and material properties of these sculptures are often controlled by conservation treatment methods. However, the application of existing treatment methods is challenging at times, indicating that more diverse treatment materials and techniques are necessary. Therefore, in this study, a treatment method that employs volatile corrosion inhibitor(VCI) powder, rather than an anti-corrosion solution, for the conservation and management of metal artworks was used. VCI powder and VCI films containing VCI powder were used, and the results obtained confirmed that both of them showed anti-corrosion effect. Only a slight change in the chromaticity of metal samples was observed, and compared to the untreated samples, the application of the VCI powder resulted in a decrease in the rate of corrosion by half. Moreover, VCI film tests revealed that comparing to the untreated or polyethylene film-treated samples, VCI film treatment resulted in a decrease in the occurrence of corrosion compounds. The contact angle, surface energy, and surface electrical resistance were measured, and the evaluation of these surface properties established the anti-corrosion effect of VCI. Additionally, direct application of VCI and VCI films on actual sculptures further confirmed the anti-corrosion effect of VCI.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.66-72
• /
• 2008

Manganese hydrogen phosphate hydrate, $MnHPO_4{\cdot}2.25H_2O$, is a major constituent of the pre-conditioning compositions for the manganese phosphate coating treatment over carbon steel substrate. This compound is conventionally produced by the synthesis in the aqueous solution process followed by the filtration and drying processes and a series of size reduction and classification processes in dry state. However, it is evident that the conventional process is neither environment-friendly nor cost-effective. In this work, a new process principle was examined based on the controlled double-jet precipitation technology to produce the manganese chemical product of fairly uniform particle size distribution in an aqueous solution media. The effects of stabilizing agents were comparatively studied by the scanning electron microscope analysis in a uniformity point of view of the resulting particle size. Polyvinylpyrrolidone and Gum Arabic were excellent in controlling the crystal growth step, resulting in fairly uniform size distributions of the particles from the controlled double-jet process.

• Journal of fish pathology
• /
• v.28 no.3
• /
• pp.117-123
• /
• 2015

Economic loss by soft tunic syndrome of edible ascidian, Halocynthia roretzi has become a serious problem. Recently, it has discovered that the cause of this syndrome is infection by a protozoan parasite Azumiobodo hoyamushi. However, only a few studies have been conducted to control this parasitic disease. In a previous research, non-specific disinfectants have been found to be effective in controling the causative parasite. In an attempt to eradicate this causative parasite, organic acids were tested in this study to evaluate their in vitro and in vivo efficacy. In vitro tests showed that 8 different organic acids used in this study were moderately or highly effective with protozoan-killing effects ($EC_{50}=153{\sim}275{\mu}g/ml$). Despite weak in vivo penetration of organic acids into the tunic tissues, treatment with high concentration reduced the mortality of ascidian caused by infection the parasite, indicating that we might be able to develop a disinfection method using environmentally-friendly organic acids.

• Weed & Turfgrass Science
• /
• v.2 no.2
• /
• pp.111-121
• /
• 2013

Literatures were reviewed to understand the weeds occurring on the lawn and the effective control methods of them. Thirty-seven species of 16 families including three species of Cyperaceae for example Cyperus sanguinolentus, nine species of Poaceae including Digitalis ciliaris, Poa repens, etc., and 25 species of broad-leaved weeds such as Artemisia princeps, Draba nemorosa, Hydrocotyle sibthorpioides were occurred on the lawns. One hundred ninety-six weed species of 53 families were occurred on a tomb graveyard adjacent to the mountain. Therefore, it is possible to be infested by the weeds occurring on the graveyard on the golf course adjacent to the mountains. There are 67 items, 32 kinds of the soil treatment herbicides including dichlobenil GR, methiozolin EC, oxaziclomefone SC, imaxaquin GR et al, and 35 kinds of the foliar treatment herbicides including metamifop EC, bifenox flucetosulfuron WG, flazasulfuron WP, trifloxysulfuron-sodium WG et al. registered at the end of May 2012 for efficient management of the weeds occurring on the lawn. For effective management of the weeds, the herbicide can be generally applied twice a year on March to April and August to September for soil treatment and once a year on June to July for the foliage treatment.

• Journal of Periodontal and Implant Science
• /
• v.35 no.3
• /
• pp.525-536
• /
• 2005

여러 연구들을 통해 많은 학자들이 임프란트 안정성(stability)은 표면의 특징에 달려있다고 생각하게 되었다. 표면의 구조, 에너지, 산화물(oxide) 두께와 표면성상(topography)등 임프란트의 표면의 특징은 임프란트와 골조직의 반응에서 중요한 역할을 하는 것이 알려짐에 따라 티타뮨 임프란트의 표면의 처리 방법에 큰 관심을 가지게 되었다. 그 중에서 티타늄 임프란트 표면의 산화피막화(anodization)가 한 방법으로 대두되었다. 이 방법은 전기화학적 방식으로 임프란트 표면에 거칠고(rough)두꺼우며(thick), 기공(pore)을 가지는 산화물 막을 형성하는 것으로 산화물의 두께는 coronal 부분(l-2 ${\mu}m$)으로부터 apical부분(7-10 ${\mu}m$)까지 증가하게 된다. 산화피막의 표면에는 다양한 크기의 수많은 기공이 주로 1-2 ${\mu}m$ 두께로 임프란트의 apical 부분에서 존재하며, 임프란트 표면의 거칠기는 conical 위부분에서 apical 부분까지 계속 증가한다(평균 Ra value=1.2 ${\mu}m$). 또 다른 표면 처리 방법으로는 blasting 후에 etching을 한 SLA 표면이 있다. 이 연구의 목적은 일반적으로 많이 이용되고 있는 anodized 표면과 SLA 표면의 조직학적 반응을 비교 분석하는 것이다. 24개 임프란트를(anodized surfaced implant-12개 , SLA-12개, 8mm ${\times}\;{\Phi}$ 4.3) 6마리 토끼의 오른쪽과 왼쪽 femur에 식립하였다. 12주후에 동물들을 희생하여 EXACT cutting-grinding system을 이용하여 샘플을 절단하고 800, 1200 및 4000 번 연마제(abrasive) paper로 20-50 ${\mu}m$ 까지 grinding하였다. 샘플은 Multiple staining 용액으로 염색하여 SLA 임프란트 군과 비교하였다. 골과 임프란트 사이에 연결을 TDI 프로그램을 이용하여 %로 측정하였다. SLA 임프란트 군 경우에는 골과 임프란트 사이의 연결이 $74{\pm}19%$ 이고, 양극 산화한 임프란트 군 경우에는 $77{\pm}9%$이었다. 양극 산화한 티타늄 임프란트의 골 접촉률이 SLA 표면 임프란트 경우과 통계학적으로 유의한 차이는 보이지 않았다.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.2
• /
• pp.107-115
• /
• 2016

In this study, the bond strength of metal spraying system by surface treatment of concrete (waterproof/corrosion method) in water treatment facilities was evaluated. The results showed that the system with Sa-P-R-(S) (sanding-perviousness surface hardener-surface roughness agent-metal spraying-sealing) led to the desirable performance. The bond strength, the coefficient of water permeability and air permeability were 3.7MPa, $0.68{\ast}10^{-8}cm/sec$, and $0.45{\ast}10^{-16}m^2$, respectively. In scanning electron microscope analysis, the microstructure of specimen coated with perviousness surface hardener was much denser than that without it. Therefore, the specimen coated with sanding-perviousness surface hardener-surface roughness agent-metal spraying-sealing had the best bond performance and was the most suitable system to concrete surface in water treatment facilities.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.104-104
• /
• 2017

유럽의 폐차 처리 지침, RoHs 및 국내 친환경 소재 부품의 개발이 날로 가속화 되면서 종래 사용해 오던 인산염 피막 등 중금속이 함유된 코팅 재료는 점차 친환경 코팅 용액으로 전환이 되었다. 최근 자동차 산업 등에서 종래 중금속인 $Cr^{+6}$을 함유하지 않는 다양한 코팅 용액이 상용화 되고 있다. 그 중 가장 효율적으로 적용되고 있는 용액이 아연 flake를 첨가하여 희생 양극효과를 가능하게 하여 내식용 코팅 용액으로 상용화 하고 있다. 이 용액에는 내식성을 확보하기 위하여 희생양극이 가능한 소재 인 아연 분말을 첨가하며, 이 분말의 분산성이 소재와 코팅 층의 밀착성, 내식성에 결정적인 영향을 미친다. 특히 산업 현장에서는 아연 분말의 효율적인 분산을 위하여 24시간 이상 교반해야하기 때문에 생산성을 감소시키는 결정적인 요인으로 작용을 한다. 아연 분말의 분산은 용액 내에 첨가하는 각종 첨가제의 종류와 첨가량에 따라 현저하게 분산성이 다르기 때문에 첨가 원소에 대한 연구가 매우 중요하다. 본 연구에서는 서로 다른 이종 합금을 첨가하여 각종 첨가제의 종류 및 첨가량이 분산에 미치는 영향을 조사하였고, 첨가량이 코팅 층의 밀착성 및 내식성에 미치는 영향에 대하여 연구하였다. 분산제 첨가량이 낮을 경우 용액은 두껍게 코팅이 되며 분산 거리가 짧아졌다. 이 경우 코팅 층의 박리가 쉽게 발생하며, 코팅 층이 불균일하였다. 1.7% 첨가량에서 최적분산효과를 얻을 수 있었으며, 1,000시간 이상의 내식성을 확보할 수 있었다. 분산성과 동시에 유동성 확보가 중요하며, 유동성 확보를 위하여 점증제의 첨가량에 대한 변화를 주었다. 최적의 첨가량은 1.5% 이상으로 이 경우 부식 발생시간을 억제할 수 있었다.