• Journal of the Korean Data and Information Science Society
• /
• 제8권1호
• /
• pp.9-20
• /
• 1997

Several methods are proposed for optimizing Fourier series estimators with respect to Mean Integrated Square Error metrics. Traditionally, such method have followed. one of two basic strategies; A stopping rules or the rules of determine multipliers. A central hypothesis of this study is that better estimates can be obtained by combining the two strategies. A new multiplier sequence is proposed, which used in conjunction with any of the stopping rules, is shown to improve the performance of estimator which relies solely on a stopping rule.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• 제42권2호
• /
• pp.7-14
• /
• 2005

This paper presents a method to reduce torque ripple of brushless DC motor by compensating phase delay due to winding inductance. For considering torque ripple comes from the phase winding inductance, torque equation of one phase is derived as Fourier series that is function of the delay. From the equation, also the resultant equation that the current delay is compensated is derived. It is validated that the compensated torque has a form of Fourier series for rectangular wave that is ideal torque, and torque ripple is reduced, consequently. Experimental method for the compensation is realized by replacing switching pattern of inverter by pattern of compensated rotor position. The effectiveness of the proposed method to reduce torque ripple has been demonstrated by the simulation and experimental results using 3 phase 4 pole brushless DC moor.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제7권5호
• /
• pp.440-446
• /
• 1996

The multiple-ridged circular waveguides is analyzed using Fourier series and the mode matching technique. The enforcement of the boundary conditions yields the simultaneous equations for the field coefficient inside the waveguides. The simultaneous equations are solved to represent a dispersion relation in an analytic series form. The numerical computation is performed to illustrate the behavior of the cutoff wavenumbers in terms of number, length and angle of ridges. The presented series solution is exact and rapidly-convergent so that it is efficient for numerical computation. A simple dispersion relation based on the dominant mode analysis is obtained and is shown to be very accurate for most practical applications.

• The Journal of the Acoustical Society of Korea
• /
• 제18권7호
• /
• pp.39-44
• /
• 1999

An analysis of the frequency parameters and vibrational modes is described for a rectangular plate. Double Fourier sine series is used as a modal displacement functions of a rectangular plate and applied to the free vibration analysis of a rectangular plate under various boundary conditions. The frequency parameters obtained by the double Fourier sine series method are compared with those obtained by the theory of finite element method and Ritz method. Frequency parameters are presented for the various aspect ratios for plate. The first four modal shapes for the rectangular plate under various boundary conditions are accurately described.

• Journal of the Korean Data and Information Science Society
• /
• 제9권2호
• /
• pp.189-202
• /
• 1998

The goat of this paper is to study on variance estimation - Rice variance estimation, Gasser, Sroka and Jennen-Steinmetz's varince estimation - in smoothing goodness-of-fit tests. The comparisons of powers on test statistics are conducted by the change of variance, the number of oscillations, the amplitude of the alternative sample distribution.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.155-160
• /
• 1996

The vibration analysis of the automobiles has been a good subject for the engineers seeking solutions for more comfortable life. In the area of industrial vehicles, however, the seriousness of the vibration annoyance has not been considered so much. In this paper, a finite element model was built which was good for the low-frequency system(of fork-lift truck), and a forced vibration analysis was obtained for the component of 2n of harmonic orders from engine excitation to this model. Finally, a design optimization upon dynamic responses was made to minimize the vibration acceleration level at selected points representing the vibration level of the whole system.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.80-82
• /
• 2004

The single phase switched reluctance motor(SRM) is more simpler and robust in the structure than poly phase SRM. It has the merits that it reduces the switching elements and the energy density per volume is very high. Recently, it has been researched and developed in various types and starting method due to the technique of power electronics and the computer added design. This paper presents a analytical representation of the phase inductance of a single phase SRM, as function of position and current, taking into account the non-linearity of the magnetic circuit. the method is based on Fourier series expansion. Analytical expressions for the calculation of instantaneous phase inductance, flux linkage, coenergy and electromagnetic torque as a function of rotor position and winding currents are derived.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• 제30B권4호
• /
• pp.67-75
• /
• 1993

The Fourier series are employed to approximate the input/output(I/O) characteristics of a dynamic system and, based on the approximation, a new learing control algorithm is proposed in order to find iteratively the control input for tracking a desired trajectory. The use of the Fourier approximation of I/O renders at least a couple of useful consequences: the frequency characteristics of the system can be used in the controller design and the reconstruction of the system states is not required. The convergence condition of the proposed algorithm is provided and the existence and uniqueness of the desired control input is discussed. The effectiveness of the proposed algorithm is illustrated by computer simulation for a robot trajectory tracking. It is shown that, by adding feedback term in learning control algorithm, robustness and convergence speed can be improved.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• 제29B권10호
• /
• pp.27-36
• /
• 1992

This paper proposes a numerical method of motion planning for manipulators using Foruier series. For a redundant manipulator, we predetermine the trajectories of redundant joints in terms of the Nth partial sum of the fourier series. then the optimal coefficients of the fourier series are searched by the Powell's method. For a nonredundant or redundant manipulator, CS02T-continuous smooth joint trajectory for a point-to-point task can be obtained while considering the frequency response. We apply the proposed method to the 3-link planar manipulator and the PUMA 560 manipulator. To show the validity of the proposed method, we analyze solutions by the Fast Fourier Transform (FFT). Also, several features are discussed to obtain an optimal solution.

• Journal of the Korean Data and Information Science Society
• /
• 제9권1호
• /
• pp.29-36
• /
• 1998

A Simple, closed form expression is derived for a linear smoothing spline by Eubank (1994, 1997). We introduced his estimater and studied how well examples are fitted to this estimator with the values of minimum generalized cross validation.