• Membrane Journal
• /
• v.25 no.4
• /
• pp.358-366
• /
• 2015

Flat membrane with $0.4{\mu}m$ pore size was prepared with PVdF (polyvinylidene fluoride) nanofiber, which has the advantages such as excellent strength, chemical resistance, nontoxic, non-combustibility. After that, spiral wound module was manufactured with it including a woven paper. Effect of pH was studied by comparing permeate fluxes and rejection rates of the spiral wound module using simulation solution including kaolin and humic acid. The recovery rate and filtration resistance were calculated after water back-washing at the end of filtration experiment. In addition, after the water filtrated by the spiral wound module was passed through a column filled with GAC (granular activated carbon), adsorption effect of GAC was investigated by measuring the turbidity and $UV_{254}$ absorbance.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.63-69
• /
• 2010

This study investigates the chemical resistance of the recycled aggregate concrete containing calcined ground slag, fly ash, and diatom powder. The recycled aggregate which had the density of $2.48g/cm^3$, the absorption of 4.25%, and standard gradation was used and the concrete specimens were submerged in solutions of $Na_2SO_4$ and $CaCl_2$ at 10% concentration for 6 months. As the submersion result, pore volume of over $0.02{\mu}m$ diameter was formed less in the concrete specimens containing calcined ground slag, fly ash, and diatom powder than in the concrete without the pozzolanic materials and the result shows the effectiveness of the pozzolanic materials for the increase of chemical resistance of the recycled aggregate concrete.

• The Research Journal of the Costume Culture
• /
• v.23 no.6
• /
• pp.1004-1020
• /
• 2015

The purpose of this study is to assess whether the emotional leadership of the CEO of a fashion company has a significant influence on corporate performance. In this study, a survey was conducten on employees of fashion companies from August 1 to 30, 2015, and 350 copies of questionnaires were collected and used for analysis. Factor analysis, reliability analysis, and regression analysis were employed to analyze the data using SPSS software (ver. 21.0). According to the study results, if a fashion company CEO has higher emotional leadership, it leads to an increase in the job satisfaction and performance of the staff members, and an improvement in new product performance thanks to more investment and development and an expanded R&D staff. Additionally, the higher emotional leadership of the CEO contributes to an increase in operating profits, sales, and market share. Therefore, the importance of organizational culture was confirmed by its regulation effect on the emotional leadership and management performance of a fashion company. According to the results of this study, the emotional leadership of a CEO plays an important role in improving the performance of a fashion company, and future studies are needed to identify how to enhance the corporate performance of a fashion company from various perspectives.

• Journal of Embryo Transfer
• /
• v.28 no.3
• /
• pp.223-227
• /
• 2013

The objective of the study is to assess temperament of a horse based on general temperament test by a questionnaire survey. Five test criteria were identified: gentleness, patience, aggressiveness, sensitivity, and friendliness, each on a 5-point scale. 114 horses bred at the National Institute of Animal Science (NIAS) in 2010, 2011 and 2012. The horses recorded scores of 3.6~3.9 for gentleness, 3.1~3.6 for patience, 3.4~4.0 for aggressiveness, 2.8~3.2 for sensitivity, and 3.4~3.8 for friendliness, the overall score for sensitivity the lowest. Horses born in 2012 scored lower than the rest in all five areas at a statistically significant level (P<0.05). By gender, the colts scored higher than the fillies in all five areas, but the discrepancy was not statistically significant. Factor analysis yielded only one factor, and the Cronbach's ${\alpha}$ value was 0.980 for standardization of Factor 1, indicating a high reliability of internal consistency. The correlation coefficients among the test criteria ranged between 0.85 and 0.91 (P<0.01). The assessment criteria used in this study are expected to provide a useful basis designing a temperament test horses.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.19-32
• /
• 2012

Pharmaceutical use accounts for a great part of articles and papers on crosslinking of polymers. Crosslinking of polymers used for tissue engineering and drug delivery respects non-cytotoxicity and in situ gelling. The crosslinking of polymers is aimed not only at the improvement of modulus, chemical resistance, and thermal resistance, but also at endowing them with such functions as metal adsorption, antifouling, and ion exchange via crosslinked segments. Smart polymers responding to environmental change, and cosslinking mediated by light, enzyme, natural compound and in aqueous medium in consideration of environment are being studied. Developing new polymeric materials is essential along with the pharmaceutics aiming at the longevity of 120 years old. Functionalization and property adjustment of polymers through crosslinking will be done more delicately. Hydrogels will be focused on injectable and in situ gel forming. In the coating industry crosslinking system with low non-toxicity and low energy consumption will be developed in consideration of workers and environment.

• Resources Recycling
• /
• v.18 no.4
• /
• pp.31-37
• /
• 2009

The purpose of this study was to evaluate the effects of fly-ash and blast-furnace slag on strength development and durability of ternary blended concrete (TBC) and ordinary portland cement concrete as fly ash and slag contents. Main experimental variables were performed fly ash contents (0%, 10%) and slag contents (0%, 10%, 20%, 30%). The compressive and flexural strengths, chloride-ion rapid permeability and chemical attacks resistance were measured to analyze the characteristic of the developed TBC on hardened concrete. The test results showed that compressive and flexural strength of TBC increased as the slag contents increased from 0% to 30% at the long term of curing. It considers blast furnace slag used when fly ash content was up to 10%. The permeability resistance of TBC(fly ash 10%, blast 30%) was extremely good at the curing time 90 days. Also, the effects of added blast furnace slag on OPC and TBC were increased on the permeability and chemical attacks resistance.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.04a
• /
• pp.89-89
• /
• 2001

종이는 목재섬유와 물의 현탁액을 스크련을 통해 균일하게 분산시킨 판상섬유 제품 으로서 가격이 저렴하고, 열, 전기절연성, 필터기능, 난연성 및 폐기성이 우수하여 다양한 분 야에서 활용되고 있다. 특히 최근에는 종이의 고부가가치화, 차별화를 위하여 내열성, 전기 절연성, 내수성, 기계적 특성, 내약품성, 생체적응성을 지닌 다양한 기능지가 개발되어 식품, 전기, 전자, 건축, 화학, 의료 관련 산업에 있어서 주요 재료로 이용되고 있다. 특히 전기, 전 자산업 발전과 더불어 전기절연성이 우수한 종이의 역할과 수요는 크게 증대되고 있으며 산 업발전의 핵심적인 제품으로서 자리매김을 하고 있다. 하지만 국내의 경우 전기절연지와 관 련된 제품 및 생산기술 부족으로 전량을 수입에 의존하고 있는 실정이며, 그 수입량은 앞으 로 전기 및 전자 산업의 발전으로 인해 더욱 증가할 것으로 예상된다. 이러한 수입의존성을 극복하기 위해서는 전기절연지와 관련된 제품개발 및 생산기술에 관한 연구가 시급히 요청 되고 있다. 이러한 기술의 국산화는 수입 대체 효과 뿐만 아니라 관련 산업의 발전에도 기 여할 수 있을 것으로 예상되며 수출산업으로 성장할 수 있을 것으로 예상된다. 종이의 전기적 성질은 유전상수, 유전손실율과 같은 유전적 특성과 전기저항, 절연 파괴강도의 기계적 특성으로 구분할 수 있다. 종이의 전기적 성질 가운데 유전율은 전기장 에 대한 종이의 물리화학적인 반응으로 일반적으로 종이의 밀도와 종이를 구성하는 성분의 쌍극자 모멘트에 비례하며 온도에 따라서도 변화한다. 일반적으로 온도가 상승하면 열에너 지를 얻게된 쌍극자가 전기장에 배열됨으로써 유전율이 상승하지만 온도가 유리전이점 이상 으로 높아질 경우 열적 교란에 의해서 분극 능력이 감소하게 되어 유전완화 현상이 나타난 다. 전기절연지로 사용될 종이의 절연특성을 이해하기 위해서는 사용환경에 따른 유전적 특 성 및 tan$\delta$에 관한 연구가 펼요하다. 본 연구에서는 종이의 유전특성을 개선하기 위해서 펼름형성능력이 우수한 polyvinyl alcoholCPV A)과 aery lonitrile을 이용하여 시아노에틸화한 P PYA의 표면처리에 따른 종이의 유전적 특성의 변화를 검토하였다. 그 결과 PYA에 도입된 시아노에틸기에 의해 유전율을 증가시킬 수 있음을 확인하였다. 또 본 연구에 적용된 시험 범위에서는 온도상승에 따라 유전율이 상승하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.117-123
• /
• 2010

If FRP materials that have been known as high durability materials are exposed to harmful environmental factors, deterioration and characteristics of materials can be reduced due to chemical reaction such as hydrolysis. Therefore, to use FRP materials as building major materials, it is important to exactly grasp dynamic properties by use condition. Accordingly, this study stored FRP materials in a strong acid and alkali compound solution for a certain period to conduct simulation for acute or chronic, extreme changes by chemicals, and conducted a test for compressive, tensile, shear and bending strength to analyze changes in strength by kinds and storage days of chemicals. In conclusion, the study findings indicate excellent chemical resistance of FRP materials.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.4
• /
• pp.305-311
• /
• 2020

Polymer modified cement mortar (PCM) can improve the performance of adhesion strength, flexural strength, chemical resistance, etc., compared with cement mortar, and is widely used when repairing RC structures. However, PCM causes a burst in an environment with high temperature and fire rate, which causes problems in the stability of the structure. In this study, for the purpose of developing explosive reduction PCM, the polymer mixing ratio is 2%, 4%, 6%, the fiber length is 6mm, 12mm, 6+12mm, and the PP fiber mixing rate is 0.05 Vol% and 0.1 Vol%. Furnace heating experiment (600℃, 800℃) was carried out. As a result of comparative analysis of the explosive properties, it was confirmed that the explosive reduction effect due to the fiber incorporation was insufficient when the polymer mixing amount was 6% or more.

• Polymer(Korea)
• /
• v.35 no.2
• /
• pp.183-188
• /
• 2011

Pentaerytritol triacrylate (PETA) was synthesized by a condensation reaction between pentaerytritol and acrylic acid. The highest yield of PETA was obtained when heptane was used as a solvent under the 1:4 mole ratio of pentaerytritol and acrylic acid. The 6-functional urethane acrylates(UA) were also synthesized by a condensation reaction between PETA and diisocyanate. Cured films were prepared from the mixtures of UA oligomer, reactive diluents and UV initiator to investigate their physical properties. The thermal stability of the aliphatic urethane acrylate was better than that of the aromatic urethane acrylate. The UA-2 showed good hardness and scratch resistance properties while the UA-l with a high degree of curing density exhibited a better chemical resistance. All the UA oligomers showed fairly good adhesion strengths but the other physical properties of UA-3 were poor due to its low curing density.