• 대한전기학회논문지:전력기술부문A
• /
• 제53권3호
• /
• pp.168-174
• /
• 2004

This paper describes a new fault location algorithm based on the voltage equation at the relaying point using 6-phase current for untransposed 765㎸ parallel transmission lines. The proposed method uses the voltage and current collected at only the local end. By means of 3-phase circuit analysis theory to compensate the mutual coupling effects between parallel lines, the fault location is derived. The fault distance is determined by solving the 2nd distance equation based on KVL(Kirchhoff's Voltage Law). Extensive simulation results using EMTP(Electromagnatic Transients Program) have verified that the error of the fault location achieved is up to 4.56(%) in untransposed parallel transmission lines.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전력기술부문
• /
• pp.59-61
• /
• 2002

This paper describes how travelling waves measured at an end of a transmission line can be used for fault location. In this paper a FIR filter which makes' high frequency components much more prominent is proposed. Consequently. the algorithm can distinguishes correlation peaks. A series of simulation studies using EMTP verified that the proposed algorithm can calculate an accurate fault distance in spite of effects of various errors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.255-257
• /
• 1999

Fault location algorithms based on the current distribution factors under the one-phase to earth fault condition of a double-circuit line are presented. The derivation method for current distribution factors is showed, to calculate fault current, fault resistance and the zero sequence current of other parallel circuit which are unknown. As the proposed algorithms 1,2,3 embodies an accurate location by the voltage and the current of the relaying point.

• 감성과학
• /
• 제1권1호
• /
• pp.145-152
• /
• 1998

본 연구에서는 한국어의 정서관련 어휘분석을 통하여 내적체계의 차원을 알아보고자 하였다. 이를 위해 연구1에서는 내적경험을 표현하는 데 자주 쓰이는 어휘들을 자유연상을 통해 100개를 선정하고 유사성과 빈도평가 자료를 다차원분석한 결과, 1차원(63%)은 불쾌, 2차원(25%)은 각성수준으로 해석될 수 있었고, 이는 기존의 차원모형의 주장과 거의 유사한 결과였다. 다른 이휘목록을 사용하였을 때의 결과와 비교하기 위해, 연구 2에서는 표정을 보고 정서를 추론하는 실험을 통해 자주 언급된 단어를 빈도순으로 22개 선정하였다. 이를 이용하여 같은 방법으로 다차원 분석한 결과 역시 같은 차원들이 얻어졌으나, 1차원의 비중이 훨씬 커서(89%)각성수준의 설명력은 (6%)상대적으로 작았다. 연구 3에서는 연구 1,2의 이휘목록이 전체 재적체계의 차원 공간에서 차지하는 상대적인 위치를 비교하기 위해, 두 어휘목록을 포함한 83개 내적체계의 단어를 차원평정시켜 분석하였고, 연구결과가 차원모형에서 갖는 시사점이 논의되었다.

• 대한공간정보학회지
• /
• 제1권2호
• /
• pp.177-184
• /
• 1993

소규모 지역에 대한 대축척 정밀 지형정보를 경제적으로 얻기 위해 외부표정요소를 정확히 산출하고, 무선조종이 가능한 무인 비행선에 정오차 보정요소를 결정한 35mm 비측정용 카메라를 탑재하여 촬영하였다. 해석에 필요한 지상기준점은 GPS측량으로 상대적 위치를 결정하여 정확도 향상을 기하였다. 또한 해석도화기에 의해 대축척 지형도를 제작하여 정확도 검증을 함으로써 그 응용가능성을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.275-277
• /
• 2001

This paper presents a fault location algorithm using current distribution factors for distribution feeder systems. When a fault occurs in distribution system, an accurate fault distance is important for fast fault restoration. The proposed algorithm achieves a high accuracy using negative sequence circuit with various fault conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.333-335
• /
• 2001

In this paper, an algorithm for fault location in Auto Transformer(AT) Feeding Railway system is presented. If a fault occurs at the AT feeding circuits of electrical railway system, it is very important to find fault location and to remove it immediately for the purpose of ensuring safety for transportation. Because the characteristics of reactance-distance are not linear, only using one terminal signals to give fault distance is difficult. In this paper, first, using the KVL, 4 voltage equation are obtained. Secondly, eliminating voltage a distance equation which consists of currents at rail and line parameters including mutual effects.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.121-123
• /
• 2001

This paper presents a fault location algorithm using iterative method at unbalance condition for distribution feeder systems. Distribution feeders include single phase and three phase laterals. The proposed algorithm achieves a high accuracy by continuously updating voltage and current phasor using the phase components and admittance load model.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권6호
• /
• pp.267-273
• /
• 2005

This paper proposes a line-to-ground fault location algorithm for underground cable system. A feature of the proposed method is a new algorithm based on the analytic research which has not been tried until now. The proposed method firstly makes voltage and current equations using analysis of distributed parameter circuit for each of cores and sheathes respectively, and then establishes an equation of the fault distance according to the analysis of the fault conditions. Finally the solution of this equation is calculated by Newton-Raphson iteration method. The effectiveness of this proposed algorithm has been proven through PSCAD/EMTDC(Ver. 4.1) simulations.

• 대한전기학회논문지
• /
• 제45권2호
• /
• pp.167-174
• /
• 1996

In this paper, a fault location algorithm is presented, which uses novel signal processing techniques and takes a new paradigm to overcome some drawbacks of the conventional methods. This new method for fault location on electric power transmission lines uses only one-terminal fault signals. The main feature of the method is hat it uses the high frequency components in fault signal and considers the influence of the source network by using a traveling wave propagation characteristics. As a result, we can develop a high speed, good accuracy fault locator.