A Line to Ground Fault Location Algorithm for Underground Cable System

지중 케이블 계통의 1선지락 고장점 표정 알고리즘

  • 이덕수 (명지대학 전기공학과 NPTC) ;
  • 양하 (명지대학 전기공학과) ;
  • 최면송 (명지대학 전기공학과)
  • Published : 2005.06.01

Abstract

This paper proposes a line-to-ground fault location algorithm for underground cable system. A feature of the proposed method is a new algorithm based on the analytic research which has not been tried until now. The proposed method firstly makes voltage and current equations using analysis of distributed parameter circuit for each of cores and sheathes respectively, and then establishes an equation of the fault distance according to the analysis of the fault conditions. Finally the solution of this equation is calculated by Newton-Raphson iteration method. The effectiveness of this proposed algorithm has been proven through PSCAD/EMTDC(Ver. 4.1) simulations.

Keywords

References

  1. E.C. Bascom, 'Computerized Underground Cable Fault Location Expertise,' Proceedings of the 1994 IEEE Power Engineering Society, pp. 376-382, April 1994 https://doi.org/10.1109/TDC.1994.328403
  2. J. H. Sun, 'Fault Location of Underground Cables Using Travelling Wave,' Trans. KIEE, pp. 1972-1974, July 2000
  3. J. Moshtagh, R. K. Aggarwal, 'A new approach to fault location in a single core underground cable system using combined fuzzy logic & wavelet analysis,' The Eighth lEE International Conference on Developments In Power System Protection, pp. 228-231, April 2004 https://doi.org/10.1049/cp:20040105
  4. K. H. Kim, J. B. Lee, Y. H. Jeong, 'Fault Location Using Neuro_Fuzzy for the Line-to-Ground Fault in Combined Transmission Lines with Underground Power Cables', Trans. KIEE, pp. 602-609, October 2003
  5. Seung-Ju Jeong, 'Circuit Theory,' Dong-il Press, pp. 302-316, January 1986
  6. 'EMTP course book', Korea Electrical Engineering & Science Research Institute, Korean EMTP Committee, 2002