• Radiation Oncology Journal
• /
• v.6 no.1
• /
• pp.1-11
• /
• 1988

Recovery from potentially lethal damage (PLDR) after irradiation was studied in plateau-phase culture of Vero cells in vitro. Unfed plateau-phase cells were irradiated with dose of 1 to 9Gy using Cs-137 irradiator. Cells then were incubated again and left in situ for 0, 1, 2, 3, 4, 5, 6, and 24 hours and then were trypsinized explanted, and subcultured in fresh RPMI-1640 media containing $0.33\%$ agar. Cell survival was measured by colony forming ability. An adequate number of heavily irradiated Vero cells were added as feeder cells to make the total cell number constant in every culture dish. As the postirradiation in situ incubation time increased, surviving fraction increased by PLDR. The rate of PLDR was so rapid that increased surviving fraction reached saturation level at 2 to 4 hours after in situ incubation. As the radiation dose increased, the rate of PLDR fastened and the magnitude of increased surviving fraction at saturation level by PLOR also increased. In analysis of cell survival curve fitted to the linear-quadratic model, the linear inactivation coefficient $(\alpha)$ decreased largely and reached nearly to zero but the quadratic inactivation coefficient $(\beta)$ increased minimally by increment of postirradiation in situ incubation time. So PLDR mainly affected the damage expressed as $\alpha$, In the multitarget model, significant change was not obtained in $D_0\;but\;in D_q$. Therefore, shoulder region in cell survival curve was mainly affected by PLDR and terminal slope was not influenced at all. And dose-modifying factor by PLDR was relatively higher in shoulder region, that is, in low dose area below 3 Gy.

• Nuclear Engineering and Technology
• /
• v.18 no.3
• /
• pp.194-199
• /
• 1986

The behavior of micro amount of Am in aqueous solution were investigated with centrifugation method as a function of pH. In the studies described here, equilibration times were extended to 2-3 weeks to know the aging effect in radiocolloid formation. Also, the effect of the addition of foreign materials, e. g. silica gel and Fe$^{3+}$ were examined as well as the effect of presence of concentrated electrolyte. In the results, Am appeared to be rapidly adsorbed on to impurity particles for pH < 6 and probably on the container walls by an ionic sorption process. The addition of foreign material increased the fraction of Am while the addition of concentrated electrolyte hindered the process. For pH > 7 Am behaved quite differently than for pH < 6. There appeared to be rapid sorption of some Am from solution probably on the container walls followed by partial desorption that occurred over a period of 1-2 days.s.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.298-302
• /
• 2004

본 연구에서는 낙동강 하구역 해역에서의 폭풍 해일의 특성 및 이를 고려한 외해 압사파랑특성을 고찰하고 연안사주 전면의 입사파랑과 퇴적 특성과의 상호 관계를 고찰하였으며 천해역의 파랑변형을 예측할 수 있는 다방향 불규칙파 묘형을 구성하고 폭풍 해일고를 수심조건에 고려함으로써 하구역 해역에서의 파랑 변형계산을 2차원 평면수치모의실험을 수행하였다. 낙동강 하구역에서 서측에 위치하는 진우도 전면해역이 무명도 전면해역보다 약 1.0배에서 2.0배 크게 파고분포를 나타내었다. 이는 입사하는 파랑의 공간 분포가 사주전면에서 공간적으로 차이가 남을 나타내는 것으로 사주의 퇴적작용에 영향을 줄 것이라고 판단된다.

• Journal of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.328-333
• /
• 1987

1-eicosylsulfate($C_{20}H_{41}SO_4^-$) was coated onto 5 ${\mu}m$ C18 reversed phase column. Adsorption equilibrium was reached when 1.2l of $1.46{\times}10^{-4}M$ in 25% acetonitrile solution passed through the column. This coated column proved to be stable up to 10l of 0.05 M ${\alpha}$-HiBA eluent used. The column efficiencies of Eu, Nd, Ce and La measured were about 0.04 mm of HETP using 0.15M ${\alpha}$-HiBA eluent at a flow rate of 1.0ml/min. This column was used to separate some lanthanides and transition metal ions, andmshowed an excellent resolution, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.93-103
• /
• 1994

Two beam/column elements are developed in order to analyze the geometric nonlinear plane irames including the effects of internal hinge and transverse shear deformation. In the case of the first element (finite segment method), tangent stiffness matrix is derived by directly integrating the equilibrium equations whereas in the case of the second element (finite element method) elastic and goemetric stiffness matrices are calculated by using the hermitian polynomials including the effects of internal hinge and shear deformation as the shape function. Numerical results are presented for the selected test problems which demonstrate that both elements represent reliable and highly accurate tools.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.216.2-216.2
• /
• 2010

본 연구에서는 $H_2+CO_2$(40%) 혼합기체로부터 이산화탄소를 효과적으로 분리/회수 하기 위하여 가스 하이드레이트 형성법을 제안하였다. 하이드레이트의 형성 조건을 보다 완화시켜 주기 위하여 열역학적 촉진제로서 TBAB (Tetra-n-butyl Ammonium Bromide, $(C_4H_9)_4NBr$))와 THF(Tetrahydrofuran)를 각각 첨가하여 열역학적 촉진 현상을 살펴보았다. 다양한 농도의 TBAB(10, 40, 60 wt%)와 THF(1, 5.56, 10 mol%)에 대하여 3상(H - Lw - V) 평형을 측정하였다. 그 결과 40 wt%의 TBAB와 5.56 mol%의 THF의 농도에서 가장 큰 촉진효과를 보였으며 그 이상의 농도에서는 오히려 촉진효과가 줄어드는 것을 확인할 수 있었다. 이러한 결과는 혼합가스 하이드레이트 형성시 양론비 이상의 TBAB와 THF가 첨가될 경우 반응에 참여하지 못한 TBAB와 THF가 가스 하이드레이트 형성을 방해하기 때문이다. 열역학적 촉진제로서 실제공정에 적용할 경우 40 wt%의 TBAB와 5.56 mol%의 THF를 사용하는 것이 가장 효과적일 것으로 사료된다. 본 실험에서 얻어진 결과는 가스 하이드레이트 형성법을 이용한 합성가스 분리 공정 개발에 중요한 기초 자료가 될 것이다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.3
• /
• pp.305-319
• /
• 2000

Numerical solution lot frictional contact problems of nonlinearly deformable bodies having large deformation is presented. The contact conditions on the possible contact points are expressed by using the contact error vector, and the iterative scheme is used to reduce the contact error vector monotonically toward zero. At each iteration the solution consists of two steps : The first step is to revise the contact force by using the contact error vector given by the previous geometry, and the second step is to compute the displacement and the contact error vector by solving the equilibrium equation with the contact force given at the first step. Convergence of the iterative scheme to the correct solution is analyzed, and the numerical simulations we performed with a rigid-plastic membrane and a nonlinear elastic beam.

• Computational Structural Engineering
• /
• v.3 no.4
• /
• pp.91-104
• /
• 1990

Static performance of quadrilateral plate elements was compared through numerical experiments. Sixteen plate elements were selected for comparison from the literature, which were displacement elements, equilibrium elements, mixed elements or hybrid elements based on the Kirchhoff theory or the Mindlin theory. Thin plate bending problems, such as square plate problems, rhombic plate problems, circular plate problems and cantilevered plate problems, were modeled by various meshes and solved under various kinds of boundary conditions. Kirchhoff elements were not so good as Mindlin elements in view of efficiency and convergence. Hinton's elements resulted in the best results for the problems considered with respect to efficiency, convergence and reliability but in some problems they also resulted in more or less inaccurate solutions.

• Journal of Korean Association for Spatial Structures
• /
• v.19 no.4
• /
• pp.69-76
• /
• 2019

A stadium roof that uses the pin-jointed spatial truss system has to be designed by taking into account the unstable phenomenon due to the geometrical non-linearity of the long span. This phenomenon is mainly studied in the single-free-node model (SFN) or double-free-node model (DFN). Unlike the simple SFN model, the more complex DFN model has a higher order of characteristic equations, making analysis of the system's stability complicated. However, various symmetric conditions can allow limited analysis of these problems. Thus, this research looks at the stability of the DFN model which is assumed to be symmetric in shape, and its load and equilibrium state. Its governing system is expressed by nonlinear differential equations to show the double Duffing effect. To investigate the dynamic behavior and characteristics, we normalize the system of the model in terms of space and time. The equilibrium points of the system unloaded or symmetrically loaded are calculated exactly. Furthermore, the stability of these points via the roots of the characteristic equation of a Jacobian matrix are classified.

• Transactions of the Korean hydrogen and new energy society
• /
• v.12 no.4
• /
• pp.293-305
• /
• 2001

최근 디젤 대체 연료 및 발전용 연료로서 그 가능성을 인정받고 있는 DME(dimethyl ether, $CH_{3}OCH_{3}$)를 이용하여 수소를 생산하는 방법으로 DME 수증기 개질반응의 기초 실험을 수행하였다. DME 개질 반응의 생성물의 평형 조성 분포를 온도, 압력, 원료의 공급비$(H_{2}O/DME)$를 변수로 하여 열역학적으로 해석하였고, DME, 에탄올, 또는 메탄올 수증기 개질 반응의 생성물의 분포를 비교하여 수소 생산을 위한 공급원료로의 가능성을 검토하였다. 여러 종류의 개질 촉매를 사용하여 DME 개질 반응을 수행해 본 결과, 반응온도 $300^{\circ}C$, 반응압력 1atm, 원료 공급비$(H_{2}O/DME)=3$인 반응조건에서 1.0wt% $Pd/{\gamma}$-alumina가 가장 좋은 활성 및 60% 이상의 수소 선택도를 보여주었으, 또한 원료의 공급비가 증가함에 따라 DME의 전환율 및 주 생성물인 수소의 수율이 현저하게 증가함을 보여주었다.