• Journal of Korean Society for Geospatial Information Science
• /
• v.3 no.1 s.5
• /
• pp.37-44
• /
• 1995

Cartesian coordinate systems used in national base map have 3 zones. If these coordinate systems are used at navigable digital maps without modifications, the edge-matching errors will occur near the edge of two zones. Therefore, it's required to eliminate separate zones of national plane coordinates system suitable far navigable digital map, we choose TM projection that is used at national base map but changed the location and the scale distortion of antral meridian.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.1 no.2
• /
• pp.42-59
• /
• 1983

This article investigates the situation of the Plane Rectangular Coordinate derived from the Gauss Double Projection whereby the positioning of triangulation point in Korea has been represented on. Analyzing and assessing it have been performed by means of new computational method such as computer programing. On the basis of the results brought about, it is found that a new Plane Rectangular Coordinate as well as map projection and scale factor of geodetic length may be adapted to improve the distortion along the geodetic line on a certain zone of map projection in order to enhance the accuracy and the utility of the practical surveying works. The proposals for this study are as follows; (1) projection: Gauss-Kruger's projection (2) Coordinate system: Plane Rectangular coordinate with 8 origin system (3) Scale factor of geodetic length in origin; $m_0=0.9999$

• Journal of Cadastre & Land InformatiX
• /
• v.45 no.2
• /
• pp.45-56
• /
• 2015

The main purpose of this investigation is to make up for the limitations of parcel addressing and to seek the application plan of cadastral triangulation point to effective installation of national index numbers. The test-bed has been constructed at the mountainous area located in Nowon-gu, seven cadastral triangulation points within the test-bed was directly applied to this investigation. Each points have been firstly converted from a plane rectangular coordinates to a single plane rectangular coordinates (UTM-K). To verify positioning results achieved from these points, a single plane rectangular coordinates through the Network-RTK was considered. With regards to verification result, maximum coordinate shift was revealed by 6 cm, this level of difference can be satisfied to Article 7, paragraph 2 "the regulation for National Index Number". This means that coordinate transformation applied with cadastral triangulation points can achieve the sastisfied result without local surveying. And also, remarkable effects have been created in terms of financial effectiveness and safe preservation of cadastral triangulation points due to the omission of local surveying.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.3
• /
• pp.183-192
• /
• 2013

As a worldwide trend, the spatial information that is established by country, institution and purpose is integrated into the data with a single spatial reference to improve the data connectivity and usability. In this study, a new national single origin plane rectangular coordinate system was studied to efficiently respond to the changes in the spatial reference according to the introduction of a new national geodetic standard and to the demand of seamless data service in the spatial information sector. For this purpose, the Korean Peninsula was set as the projection region and the projection distortion in the projection region was analyzed. The projection parameters were defined to homogenize and minimize the projection distortion, and their standardization and registration on the international organizations were conducted. The study on the required optimal projection equation resulted in the Hooijberg projection equation and projection parameters (${\Phi}$, ${\lambda}$, K, N, E) resulted in $38^{\circ}N$ and $128^{\circ}E$ projection origin, and a scale factor of 0.99924. The proper false northing and easting were 700,000m N and 400,000m E, respectively, considering the introduction of country station index system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.591-598
• /
• 2017

This study is for coordinates analysis(geocentric and rectangular coordinate) of Korean geodetic VLBI which has been operated by NGII (National Geographic Information Institute) in Republic of Korea since 2014. The purpose of this study is a fundamental research to determine the Korean geodetic datum. The VLBI data recorded from September 29th 2014 to July 31th 2017, total approximately a hundred of VLBI databases, is used to calculate daily positions and position rates. The VLBI coordinates are based on ITRF(2000,2005,2008,2014) with epochs of the first Korean VLBI observation date(September 29th 2014) and Korean Geodetic Datum(January 1st 2002). And as a results of VLBI observation, Korean VLBI coordinate movement velocity of 3.1cm/yr in the direction of $112.4^{\circ}$.

• Journal of Korea Water Resources Association
• /
• v.53 no.12
• /
• pp.1049-1057
• /
• 2020

This study aimed to develop a flow measurement method using drone in flood season. Measuring flow in all branches is difficult to conduct annually due to budget and labor limitation, safety and river works. Especially when heavy rain like storm comes, changes in stage-discharge relationship should be reviewed; however, it is usually impeded by the aforementioned issues. To solve the problem, it developed a simple measuring method with a minimum of labor and time. A numeric map and numeric orthophoto coordinate of South Korea are mostly based on Transverse Mercator Projection (TM) in accordance with rectangular coordinate system and use World Geodetic Reference System 1980 (GRS80) oval figure for conversion. Applying a concept of aerial photogrammetry, it located four visible Ground Control Points (GCP) near the river at Uijeongbu-si (Singok Bridge) and Yeongdong-gun (Youngdong 2nd Bridge) station and measured the coordinates using VRS DGPS. Hovering at a same level, drones took orthophoto of water surface at an interval of 3 seconds. It defined the pictures with GRS80 TM coordinate system, a rectangular coordinate system and then conducted an orthometric correction using GCP coordinates. According to X and Y coordinate analysis, it estimated the distance between the floating positions at 3 seconds-intervals and calculated the flow through the flow area according to the flow path. This study attested applicability of the flow measurement method using drone in flood season by applying the rectangular coordinate system based on the concept of aerial photogrammetry.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.3
• /
• pp.241-247
• /
• 2012

The national geodetic reference frame of Korea switched to the International Terrestrial Reference Frame (ITRF) in 2003. In order to study the land area changes, we calculated the entire land area of Korea using the administrative boundaries of census data provided by Statistics Korea. The standard transformation procedure by the National Geographic Information Institute (NGII) was followed. The Transverse Mercator (TM) projected coordinates were transformed into the GRS80-based world geodetic reference frame, and the ellipsoidal and the projected areas were calculated. The provinces that range over two projection origins were divided into two polygons and projected using appropriate origins. After the transformation, all boundaries were shifted in the northwestern direction, resulting in a decreased area of $1.36km^2$ (about 0.0013%) on the projected plane. Moving the boundaries into a high latitude area cancels out the effect of the enlarged ellipsoid. In addition, the rate of change shows that a higher-latitude province is more sensitive to the shift of the boundaries. The data by Statistics Korea is significantly different from those of the Ministry of Land, Transport and Maritime Affairs (MLTM), thus it is urgently recommended that the data are integrated and unified.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.2
• /
• pp.23-31
• /
• 2004

This paper focuses on a boundary surface based ray casting. In general the boundary surface based ray casting is processed in two stages. The first stage finds boundary surfaces and stores them into buffers. The second stage calculates a distance from a viewpoint to the voxels of the interested area by projecting boundary surfaces on the view plane, and then starts to traverse a volume data space with the distance. Our approach differs from the general boundary surface based ray casting in processing the first stage of it. Contrast to the typical boundary surface based ray casting where all boundary surfaces of volume data are stored into buffers, they are projected on the planes aligned to the axis of volume data coordinates and these projected data are stored into 6 buffers. Such maneuver shortens time for ray casting, and reduces memory usage because it can be carried out independently from the amount of the volume data.