• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.4 s.97
• /
• pp.445-451
• /
• 2005

This paper is the result of a experimental study about non-linear one to one modal coupling of a flexible circular cantilever beam which was transversely excited with harmonic excitation. It was proved that 2 order jumping in out of plane was caused by jump phenomenon in in-plane of flexible circular cantilever beam, because of non-linear coupling. In addition, cantilever beam showed hardening spring characteristics in in-plane and softening spring characteristics in out-of-plane.

• Journal of KSNVE
• /
• v.9 no.3
• /
• pp.621-628
• /
• 1999

The fundamental dynamic properties of the planar electric charged particle are investigated experimentally. The experiment is conducted using electric charged spheres(4 table tennis balls with conductive surfaces) suspended by insulating strings to cancel the gravitational force. The measurements of the equilibrium angles and the natural frequencies of oscillation agree well with the analytical predictions with some error, respectively.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.653-660
• /
• 1986

Two uppor bound solutions, by the force balance method and by a kinematically admissible velocity field, are compared for the metal forming problems in plane strain. It is concluded that these two approaches always give identical results when the geometrical configurations of the deformation model reman the same. By detailed derivations for plastic bending of a notched bar, closed die forging, compression of a rectangular block, machining with a restricted contact tool and plane strain backward extrusion, the identity of both approaches is verified.

• Journal of KSNVE
• /
• v.10 no.5
• /
• pp.849-858
• /
• 2000

In this paper the chaotic out-of-plane vibrations of the uniformly curved pipe with pulsating flow are theoretically investigated. The derived equations of motion contain the effects of nonlinear curvature and torsional coupling. The corresponding nonlinear ordinary differential equation is a type of nonhomogenous Hill's equation . this is transformed into the averaged equation by averaging theorem. Bifurcation curves of chaotic motion are obtained by Melnikov's method and plotted in several cases of frequency ratios. The theoretically obtained results are demonstrated by numerical simulation. And strange attractors are shown.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1397-1401
• /
• 2007

낙동강에 위치한 하회마을의 점사주는 상류에 안동 및 임하 다목적댐이 건설되면서, 수량이 조절됨에 따라 토사수리학적 특성이 상당히 변화되었으며, 식생이 발생하는 등 옛 모습을 상실해 가고 있는 지역이다. 이 연구는 낙동강의 중상류에 위치한 하회지구에 평면 이차원 하상변동 및 수질예측 수치모형인 KU-RLMS 모형을 적용하여 하회마을 앞의 점사주에 영향을 미치는 수리학적 특성 변화를 규명할 목적으로 수행하였다. KU-RLMS 모형은 하천 및 저수지의 국부적인 수리, 수질, 유사이동 해석을 위해 개발된 평면 이차원 비정상 수치모형이다. 직사각형 격자를 사용하는 유한차분법의 단점을 보완하기 위해, 흐름 계산을 위한 지배 방정식은 3차원 Reynolds 방정식으로부터 수심적분된 2차원 연속방정식과 운동량방정식을 불규칙한 경계를 현실적으로 모사할 수 있는 직교곡선 좌표계로 변환한 방정식을 사용한다. 안동다목적댐과 임하다목적댐의 방류량, 수공구조물 설치 여부 등을 고려하여 수치모의조건을 결정하였으며, 각 조건에 대한 흐름 변화특성을 분석하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.97-104
• /
• 2003

This paper proposes a new parallel manipulator fur plane motion, and then discusses on the workspace and kinematical characteristics of the manipulator. The conventional planar parallel manipulators have some disadvantages which are complex non-closed type direct kinematics, workspaces containing useless voids, and concave type border tines of workspaces. The proposed planar parallel manipulator overcomes the above disadvantages, that is, the manipulator has simple closed type direct kinematics, a void-free workspace, and a convex type borderline of a workspace. This paper shows the simulation result of the workspace as well as performances indices using a homogeneous inverse Jacobian.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.187-193
• /
• 2003

This paper presents an on-machine measurement method of flatness error fur surface machining processes. There are two kinds of on-machine measurement methods available to measure flatness errors in workpieces: i.e., surface scanning method and sensor scanning method. However, motion errors are often engaged in both methods. This paper proposes an idea to realize a measurement system of flatness errors and its rigorous application for estimation of motion errors of the positioning system. The measurement system is made by modifying the straightness measurement system, which consists of a laser, a CCD camera and processing system, a sensor head, and some optical units. The sensor head is composed of a retroreflector, a ball and ball socket, a linear motion guide unit and adjustable arms. The experimental .results show that the proposed method is useful to identify flatness errors of machined workpieces as well as motion errors of positioning systems.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.53-62
• /
• 2004

In this study, an improved post-processing technique for correcting MRI artifact due to the unknown respiratory motion in the imaging plane is presented. Respiratory motion is modeled by a two-Dimensional linear expending-shrinking movement. Assuming that the body tissues are incompressible fluid like materials, the proton density per unit volume of the imaging object is kept constant. According to the introduced model, respiratory motion imposes phase error, non-uniform sampling and amplitude modulation distortions on the acquired MRI data. When the motion parameters are known or can be estimatead a reconstruction algorithm based on biliner superposition method was used to correct the MRI artifact. In the case of motion parameters are unknown, first, the spectrum shift method is applied to find the respiratory fluctuation function, x directional expansion coefficient and x directional expansion center. Next, y directional expansion coefficient and y directional expansion center are estimated by using the minimum energy method. Finally, the validity of this proposed method is shown to be effective by using the simulated motion images.

• Korean Journal of Cognitive Science
• /
• v.10 no.3
• /
• pp.29-37
• /
• 1999

Murakami and Cavanagh (1998a,b, 1999) reported a jitter aftereffect in a static random noise after a period of adaptation to a patch of dynamic random noise. To a account for this phenomenon. they proposed the retinal slip caused by a small eye movements in the unadapted area, which is usually compensated by the visual system to stabilize images but is unsuppressed due to the adaptation. We tested this hypothesis with new experimental method and stimuli that were supposed to nullify or reduce the effect. However. the aftereffect was still observed even under these stimuls conditions More importantly, the perceived aftereffect was rather different from Murakami and Cavanagh's. After adaptation to a counterphase flickering cosine grating, the adjacent unadapted region seems to move away from the observer during the test period instead of jittering in the frontoparallel plane. We proposed a possible explanation for this new phenomenon noting the severe contrast reduction of the adapted region during flickering period. The aftereffect might be due to the flicker-inducing contrast reduction during adaptation that produces different depth planes for the adapted and unadapted region and its restoration during the test period.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.436-436
• /
• 2004

사용후 연료 건식 저장 용기가 낙하, 토네이도, 미사일, 홍수 및 지진으로 인한 사고에 대하여 전복이 발생되었을 때 강체 평면과 충돌에 의한 충돌 하중시의 구조 응력 평가하였다. 이를 위해 저장 용기의 무게 중심이 한계를 넘었을 때의 초기 전복 시작각을 무게 중심을 계산을 통해 구하였다. 상용 코드를 사용하여 전복 응력 해석 수행시 저장 용기의 강체 운동에 의하여 계산 시간이 길어지는 데, 이런 계산 시간을 줄이기 위해 일차 충돌 직전까지의 모델의 속도와 각속도 계산식을 이론적인 방법으로 구하여 해석 초기 조건으로 사용하는 방법에 대하여 제안하였다.(중략)