• Journal of Chest Surgery
• /
• v.30 no.12
• /
• pp.1167-1174
• /
• 1997

We retrospectively reviewed a series of 20 patients treated with delayed sternal closure during a 5-year period from 1991 to 1996. Of the 2675 patients with cardiovascular su gery 20 underwent this procedure. Male and female ratio was 11:9, mean age was 6.4 months(range 7 days to 5 years). The indications included unstable hemodynamic profiles after open heart surgery due to myocardial edema and poor lung compliance(15), necessity of mechanical ventricular assist device due to weaning failure(3), and hypoxia after PAB(2). Sternum was closed at a mean interval of 102(range 4 to 213) hours after operation. During delayed sternal closure, central venous pressure was elevated(p<0.05). Mediastinitis and other wound problems did not occur. Sepsis developed in 2 patients and microorganism was confirmed in one of the two patients. Five patients died(mortality 25%). And two of 15 discharged patients died during follow-up period. Cumulative survival rate was 65.0% at 12 months and also 65.0% at 24 months.(Standard error was 10.7%) Delayed sternal closure Is considered to be a good method to decompress the hemodynamically compromised heart. Without that, it is not f asible to come off bypass or to decompress the heart. Of course. careful selection of the indication is imperative.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.4
• /
• pp.48-56
• /
• 2022

Controlling the setting time of cementitious materials is one of the most important factors in securing early-age performance of concrete structures. Recently, the use of retarding admixtures, which enable the inhibition of some hydration products to control the securing time due to average temperature rise is suggested. Although various non-destructive evaluation methods have been proposed to evaluate cement hydration and hardening of cement-based materials to overcome the limitations of Vicat needle test, experimental research is still required to use the non-destructive evaluation method with added retarding admixtures. In this study, measurements of electrical resistivity and ultrasonic wave velocity in early-aged cement pastes were performed according to the addition of retarding admixture(tartaric acid). The setting time of the cement pastes was evaluated by obtained rising time of the both non-destructive measurements. As a result, the possibility of evaluating the setting delay in cement pastes was confirmed through comparative analysis with the initial and final setting times by Vicat test. In addition, X-ray diffraction results at the rising time of electrical resistivity showed a key hydration product affecting the setting delay.

• The KIPS Transactions:PartA
• /
• v.13A no.1 s.98
• /
• pp.11-18
• /
• 2006

In the Internet of various networks, it is difficult to reduce real routing time by just minimizing their hop count. We propose an adaptive proximity route selection method in DHT-based peer-to-peer systems, in which nodes select the nぉe with smallest lookup latency among their routing table entries as a next routing node. Using Q-Routing algorithm and exponential recency-weighted average, each node estimates the total latency and establishes a lookup table. Moreover, without additional overhead, nodes exchange their lookup tables to update their routing tables. Several simulations measuring the lookup latencies and hop-to-hop latency show that our method outperforms the original Chord method as well as CFS' server selection method.

• Clinical and Experimental Pediatrics
• /
• v.46 no.2
• /
• pp.122-127
• /
• 2003

Purpose : Baby-walkers are used by many parents because of the convenience they provide in keeping children occupied, quiet, happy, and in stimulating ambulation. But, these devices have more risks than benefits. Therefore, we performed a study to evaluate the effects of baby-walkers on motor development of human infants according to the hours used in a day, total duration(months), and types of injuries associated with the walkers, and to establish effective methods. Methods : 1,045 questionnaires were filled out by parents who had a baby whose aged between 8 months and 15 months that visited local pediatric clinics and medical centers in Chonju and Iksan from May 1, 2002 to July 31, 2002. They were analyzed in a control group that didn't use babywalkers, a low-user group that used baby-walkers less than 2 hours a day and a high-user group that used them more than 2 hours a day. Results : The mean age of the 1,045 babies whose parents responded to the question investigation was $12.6{\pm}2.4$ months. The number of babies who used the baby-walkers were 811(77.6%). Crawling and walking alone were delayed in the high-user group. The parents who knew the side effects of the baby-walkers totalled 392(48.3%). Conclusion : The findings of this study revealed that many parents didn't know the effects of baby-walkers on motor development in their infants and the risks associated with baby-walkers. Therefore, we should educate parents on the risks of baby-walkers and recommend reducing the use of baby-walkers.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.6
• /
• pp.1615-1624
• /
• 1997

In this paper, we propose and analyze various repair methods for a disk subsystem using mirroring. We also study the effects of the repair process that is invoked on disk faults on the mean response time of user disk requests. Finally, we analyze the effects of two different access patterns (uniform and non-uniform) on the repair process and performance. According to the results, average response times for non-uniform access pattern compared with uniform access pattern become shorter as the system load increases. Our simulation results show that the proposed repair algorithm with a short delay gives a better performance than the previous algorithms.

• Journal of Korea Multimedia Society
• /
• v.14 no.9
• /
• pp.1165-1174
• /
• 2011

In data broadcasting systems, servers continuously disseminate data items through broadcast channels, and mobile client only needs to wait for the data of interest to present on a broadcast channel. However, because broadcast channels are shared by a large set of data items, the expected delay of receiving a desired data item may increase. This paper explores the issue of designing proper data allocation on multiple broadcast channels to minimize the average expected delay time of all data items, and proposes a new data allocation scheme named two level bin-packing(TLBP). This paper first introduces the theoretical lower-bound of the average expected delay, and determines the bin capacity based on this value. TLBP partitions all data items into a number of groups using bin-packing algorithm and allocates each group of data items on an individual channel. By employing bin-packing algorithm in two step, TLBP can reflect a variation of access probabilities among data items allocated on the same channel to the broadcast schedule, and thus enhance the performance. Simulation is performed to compare the performance of TLBP with three existing approaches. The simulation results show that TLBP outperforms others in terms of the average expected delay time at a reasonable execution overhead.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.18-25
• /
• 2005

We derive refraction statics for seismic data recorded in a hard rock terrain, in which there are large and rapid variations in the depth of weathering. The statics corrections range from less than 10 ms to more than 70 ms, often over distances as short as 12 receiver intervals. This study is another demonstration of the importance in obtaining accurate initial refraction models of the weathering in hard rock terrains in which automatic residual statics may fail. We show that the statics values computed with a simple model of the weathering using the Generalized Reciprocal Method (GRM) and the Refraction Convolution Section (RCS) are comparable in accuracy to those computed with a more complex model of the weathering, using least-mean-squares inversion with the conjugate gradient algorithm (Taner et al., 1998). The differences in statics values between the GRM model and that of Taner et al. (1998) systematically vary from an average of 2ms to 4ms over a distance of 8.8 km. The differences between these two refraction models and the final statics model, which includes the automatic residual values, are generally less than 5 ms. The residuals for the GRM model are frequently less than those for the model of Taner et al. (1998). The RCS statics are picked approximately 10 ms later, but their relative accuracy is comparable to that of the GRM statics. The residual statics values show a general correlation with the refraction statics values, and they can be reduced in magnitude by using a lower average seismic velocity in the weathering. These results suggest that inaccurate average seismic velocities in the weathered layer may often be a source of short-wavelength statics, rather than any shortcomings with the inversion algorithms in determining averaged delay times from the traveltimes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.755-761
• /
• 2017

In railways powered by AC power, the main circuit breaker (MCB) is used for supplying the electric power to the catenary of the vehicle. Generally, the main circuit breaker is located between the pantograph and the main transformer, and the phase of the power applied to the vehicle changes according to the operation timing of the main circuit breaker. The operation of the main circuit breaker should be actively controlled according to the phase of the power source, since the phase of the power causes unintended transient states in the vehicle's electrical system in the form of an inrush current and surge voltage. However, the MCB has a delay time when it operates which is not constant. Therefore, an intelligent controller is needed to predict the operation delay time and control the opening and closing of the MCB.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.457-457
• /
• 2012

말라리아는 매개체에 의한 전염병으로써 국내에서는 이미 1970년대에 사라진 것으로 알려져 있다. 하지만 1990년대에 재발생하여 2000년대 초반까지 경기도와 강원도 북부지역에서 환자가 증가하는 양상을 보였다. 사람에게서 발병하는 말라리아는 4종으로 알려져 있으나 우리나라의 경우 이 중 오로지 삼일열 원충감염에 의한 것으로 밝혀졌다(질병관리 본부, 2010). 기후변화는 질병의 발생에 영향을 미칠 수 있는 중요한 요인 중 하나로써 매개체에 의한 질병의 경우 기후요소는 매개체의 번식과 활동에 적지않은 영향을 미친다. 특히 말라리아의 경우 병원균을 가진 개체수와 모기에 물리는 횟수, 감염된 모기의 수, 그 모기에 사람이 물리는 횟수와 관계가 있으나 기온과 강수량, 습도의 변화 등 기후 및 수문학적 요소와도 밀접한 관계를 가지는 것으로 밝혀졌다(Lindsay & Birley, 1996; 박윤형 외, 2006; 신호성, 2011 재인용). 본 연구의 목적은 한반도 기후-수문학적 환경특성 및 변화를 파악하고 지역적 말라리아 발생과의 상관관계를 도출하며 이를 기반으로 하여 말라리아 발생의 변동을 예측하는 것이다. 분석에 사용된 데이터는 말라리아 발생자료의 경우, 질병관리 본부에서 제공하는 2001년 1월~2011년 12월 까지의 약 16000건의 발병자료가 포함 되었고 분석의 시간 단위는 2WEEKS 이며 전국 251개의 시군구에서 발생한 전염병을 합산하였다. 기상자료의 경우 기상청 기후자료 관리 시스템에서 제공하는 동일 기간대의 평균기온, 최고(최저)기온, 강수량, 신적설, 평균 해면기압, 평균 이슬점 온도, 평균 상대습도, 평균풍속, 평균운량, 일조시간 자료를 활용하였다. 본 연구에 사용된 AWS(Automatic Weather Station)자료의 경우 기본적으로 point 형태의 관측자료이고, 분석기간 동안의 개수에서도 차이가 있기 때문에 공간 내삽기법인 kriging을 활용하여 행정구역과 zonal하는 방법으로 재가공 하였다. 지역의 수문학적 특성의 경우 10*10 DEM을 기반으로 ESRI ArcGIS 소프트웨어의 ArcHydro 기능을 이용 하여 유역을 생성하는 방법을 채택하였다. 본 연구에서는 통계적 모형을 기본으로 기후 및 수문 특성과 말라리아 발생간의 상관관계를 분석하였으며 시계열 자료의 특성상 포아송 분포의 Generalized Estimation Equation 과 Generalized Linear Model을 이용한다(Baccini 외, 2008; 신호성, 2011). 또한 말라리아 잠복시간의 지연효과 및 전염병의 계절 영향을 반영하기 위하여 Fourier transform 을 적용 하였다.

• The KIPS Transactions:PartC
• /
• v.9C no.3
• /
• pp.399-406
• /
• 2002

We consider design of multiservice network link, in which connections of constant- and adaptive-rate services arrive and leave dynamically. We propose performance analysis and design methods of these dynamic multiservice networks. A multiservice network link is modeled by a Markov chain, and data rates for adaptive-rate connections are derived using QBD (Quasi-Birth-Death) processes and matrix-geometric equations. We estimate average number of adaptive-rate connections, average data rate and average connection delay. The performance of constant-rate connections is determined from the blocking probability of the connections. Based on the performance of constant-and adaptive- rate connections, we propose a design methods of a network link to satisfy performance requirements of constant- and adaptive-rate connections (data rates, delay, blocking probability). Our methods can be used for the analysis and design of network switch supporting dynamic data and voice (video) traffic simultaneously.