• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.42
• /
• pp.111-119
• /
• 1997

본 연구는 초기에 모집단에 취약한 부분에서 고장률의 증가가 생성하는 경우의 수정수명 곳선에 관련한 것이다. 이후 고장률은 전형적 수명곡선에 따른다. 따라서 고장률 h(t)와 평균잔존수명 m(t)와의 관계는 새로운 비교가 제시되어야 하고 새로운 수리적 분석을 수행하여야한다. 본 연구의 수리적 분석의 결과로 고장률과 평균잔존수명에 대한 최적Burn-In 타임은 일치하지 않는다.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.3
• /
• pp.467-474
• /
• 2009

There are many situations arising in reliability engineering and biomedical science where failure of a subsystem increases the failure rate of other subsystem under shared load models. In this paper, the maximum likelihood estimates and the modified maximum likelihood estimates of mean time to failure and reliability function for shared load model with guarantee time are obtained by using censored system life data. Some illustrative examples are included.

• The Korean Journal of Applied Statistics
• /
• v.14 no.2
• /
• pp.369-378
• /
• 2001

본 논문에서는, 신뢰성분석에서 고려되는 평균고장률의 추이에 관한 검정법에 대해 연구하였다. 즉, 수명분포가 지수분포를 따르는지 또는 수명분포의 평균고장률이 증가하는지를 검정하는 검정통계량을 제안하였다. 제안된 검정통계량은 순서통계량의 선형 함수의 형태로 이루어져 있고 대표본 뿐만 아니라 소표본에서도 쉽게 적용될 수 있다. 또한 제안된 검정통계량의 점근상대효율을 평가하기 위해, Klefsjo(1983)가 제안한 검정통계량과 비교하여 보았다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5D
• /
• pp.497-504
• /
• 2010

In this paper, the author presents a reliability estimation technique to analyze the effects of traffic loads on pavement mean life based on the national highway database of Suwon and Uijeongbu region from 1999 to 2008. The estimation of the mean life, its standard deviation and reliability for pavement sections are calculated by using an appropriate distribution, Lognormal distribution, based on reliability theory. Furthermore, the probability paper method and Maximum likelihood estimation are both used to estimate parameters. The author found that mean life of newly constructed sections and over-layed sections is about 6.5 to 7.9 years and 7.3 to 9.1 years, respectively. The author also ascertained that the results of cumulative failure probability for pavement life between the proposed methods and observed data are similar. Such an assessment methodology and measures based on reliability theory can provide useful information for maintenance plans in pavement management systems as long as additional life data on pavement sections are accumulated.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.25-30
• /
• 2004

This paper gives an assessment criteria and average failure lifetime prediction for power supply of electrodeless fluorescent lamp. The paper present electric appliance safety standard and performance standard for power supply of electrodeless fluorescent lamp. also, It presents the Failure Rate or Mean Time To Failure(MTTF) for power supply of electrodeless fluorescent lamp. We suggest the assessment criteria and improve methods of the reliability on the design basis for the electrodeless fluorescent system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.325-330
• /
• 2018

This paper, following the shape parameters of the minimax distribution, describes the special form of the beta distribution, the Minimax distribution, as a function of the shape parameters for the software reliability model based on the non-homogeneous Poisson process. Characteristics and usefulness were discussed. As a result, the case of the shape parameter 1 of Minimax distribution than less than and greate in mean squared error is the smallest, in determination coefficient, appears to be high, the shape parameter 1 of Minimax distribution regard as an efficient model. The estimated determination coefficient of the proposed model is estimated to be more than 95%, which is a useful model in the field of software reliability. Through this study, software design and users can identify the software failure characteristics using mean square error, decision coefficient, and confidence interval can be used as a basic guideline.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.405-411
• /
• 2001

본 논문은 새롭게 설계된 프린터에 적용될 SMPS(Switching Mode Power Supply)의 평균수명을 가속시험을 통해 단기간에 산출하고, 정상사용조건에서의 수명보증을 위한 가속수멍시험법 개발에 관한 것이다. SMPS가 온도, 습도 그리고 부하에 취약하므로 이들을 가속 스트레스로 사용하였으며, 고장시간은 SMPS의 작동 후 더 이상 전원이 공급되지 않을 때까지 걸린 시간으로 정의하였다. 시험결과 주요 고장부품은 스위치 IC와 저항이었으며 8$0^{\circ}C$에서 가속계수가 90으로 산출되었다. 또한, 정상사용조건에서의 평균수명 14년을 보증하기 위해서는 온도 8$0^{\circ}C$, 상대습도 80%RH, 부하 1.5A 그리고 전압 240V에서 10대의 시료를 500시간 시험하였을 때 고장이 하나도 발생하지 않아야 한다는 결론을 얻었다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.2
• /
• pp.34-40
• /
• 2003

This paper gives an assessment criteria and reliability improvement for high frequency power supply of high efficacy electrodeless fluorescent lamp. The electrodeless fluorescent lamp system consist of electrodeless fluorescent lamp, high frequency power supply and lighting fixtures. The high frequency power supply has a shortest life at the system. Therefore It is need th assess the Failure Rate or mean Time To Failure(MTTF) for the high frequency power supply of electrodeless fluorescent lamp system and improve the reliability at design. We suggest the assessment criteria and improve methods of the reliability on the design basis for the electodeless fluorescent system.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.256-259
• /
• 1996

수명시험에서는 시험기간을 단축하기 위해 중도절단(consoring) 방법을 사용한다. 혼합 관측중단방법은 정시에 시험을 끝낼 수 있으며 고장시간을 관찰할 필요가 없다는 장점 때문에 널리 사용되고 있다. 본 논문에서는 제품의 수명이 와이블 분포를 따르고 형상모수를 알고 있다는 가정아래, 혼합 관측중단하에서 생산자 위험과 소비자 위험을 고려한 신뢰도 합격판정 샘플링 계획을 개발하였다. 아울러, 형상모수값에 개재된 불확실성이 실제 생산자 위험과 소비자 위험, 그리고 의사결정까지의 평균 고장개수에 미치는 영향을 민감도 분석을 통해 파악하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.4
• /
• pp.33-41
• /
• 2012

The aim of the study is to investigate the method to estimate a shelf life of KM6 single base propellant by stochastic gamma process model. The state failure level is assumed that the degradation content of stabilizer is below 0.8%. The constant of time dependent shape function and the scale parameter of stationary gamma process are estimated by moment method. The state distribution at each storage time can be shown from probability density function of deterioration. It is estimated that the $B_{10}$ life, a time at which the cumulative failure probability is 10%, is 25 years and the $B_{50}$ life is 36 years from cumulative failure distribution function curve. The $B_{50}$ life can be treated as the average shelf life from the practical viewpoint and the lifetime can be expressed as distribution curve by using stochastic process theory.