• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.157-163
• /
• 2012

Using six kinds of epoxy acrylates and a conductive carbon black, photosensitive resistor pastes were fabricated and then their developability in alkaline aqueous solution and the resistance values after thermal curing were evaluated. In order to impart the photocurability by UV exposure and the developability on alkaline solution, epoxy acrylate oligomers with carboxyl group, acrylate monomers, a photoinitiator and so forth were used. In addition, an organic peroxide was added into the paste to get a thermally curable composition. As a result, some of the pastes were not developed depending on the kinds of oligomers and, in the developed pastes, the measured resistance showed the different values depending on their compositions, even though they contain the same amount of carbon black. Finally, the optimum oligomer was selected and then, by adjusting the amount of carbon black, the kind of monomer and the curing temperature, the photosensitive resistor paste composition which showed the sheet resistance of about 0.5 $k{\Omega}/sq.$ could be obtained.

• Composites Research
• /
• v.35 no.2
• /
• pp.69-74
• /
• 2022

In this study, the conductive paste used in a wide range such as wiring in the electronic packaging field, the automobile industry, and electronic products is manufactured under various process conditions due to the simplicity of the process, and then the thermal, mechanical, and electrical characteristics are analyzed and simulation studies are conducted to optimize the process. to establish the conditions of the conductive paste manufacturing process. First, a conductive paste was prepared by setting various types of binder resin, an essential component of the conductive paste, and characteristics such as thermal conductivity, tensile strength, and elongation were analyzed. Among the binder resins, the conductive paste applied with a flexible epoxy material had the best physical properties, and a simulation study was conducted based on the physical property data base of the conductive face. As a result of the simulation, the best physical properties were exhibited when the Ag flake volume fraction was 60%.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.6
• /
• pp.1014-1021
• /
• 2014

This study was performed to investigate the quality characteristics of the Yanggaeng with the addition of fermented aged black giant garlic paste (FABGGP) such as pH, reducing power, color, texture, total polyphenol, DPPH radical scavenging activity, and sensory acceptability. FABGGP was incorporated into Yanggaeng at 0, 3, 6, 9 and 12%(w/w) weight amounts based on the total weight of cooked white bean and FABGGP. pH decreased significantly with the increasing levels of FABGGP add. Reducing the sugar content increased as the amount of FABGGP increased. In term of color, lightness(L) and yellowness(b) decreased significantly but redness increased with increasing the levels of FABGGP. In the texture analysis, hardness, springiness and gumminess of FABGGP Yanggaeng were lower than those of the control. Total polyphenol content and 1,1-di-phenyl-1-picrylhydrazyl (DPPH) radical scavenging activity significantly increased as the FABGGP concentration increased in the formulation, The results of the sensory test showed that Yanggaeng with 6% FABGGP had the highest score in color, overall preference and chewiness. Based on these results, it is suggested that Yanggaeng with up to 6% added FABGGP can be developed as products without adverse effects on the sensory characteristics.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.325-326
• /
• 2009

The present study concerns the acid neutralization capacity (ANC) of cement paste, mortar and concrete depending on a free water-cement ratio. The ANC of paste at 30%, 40% and 50% of water-cement ratio was measured and simultaneously the effect of aggregate on the ANC was evaluated. It was found that an increase in the acid concentration resulted in a decrease in the pH of the suspension, in particular, at 10 in the pH, a sharp decrease was observed. The ANC showed some peak resistances to acid at particular pH values.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.813-816
• /
• 2008

Polycarboxylate-type superplasticizer is widely used for producing self-compacting and high-strength concrete and improving concrete durability. This paper discusses the influence of molecular structure of polycarboxylate-type superplasticizer on the fluidity and the rate of heat liberation of ordinary Portland cement paste. The fluidity of cement paste was increased by addition of polycarboxylate-type superplasticizer. The arrival time up to the maximum rate of heat liberation was increased by addition of polycarboxylate-type superplasticizer. The fluidity and the arrival time up to the maximum rate of heat liberation were more influenced by addition of polycarboxylate-type superplasticizer having shorter grafted chain than that having longer grafted chain.

• Journal of the Korean Ceramic Society
• /
• v.40 no.12
• /
• pp.1229-1234
• /
• 2003

The utilization of metakaoline as a mineral admixture for cement has received considerable attention in recent years. This paper investigates the rheological properties of cement pastes containing metakaoline in view of fluidity. The rheology of the paste is assessed by using a BROOKFIELD RVDV II + viscometer (SC4-21, 29) having cylindrical spindle. The results show the fluidity of cement pastes with metakaoline is increased by increasing W/S ratio and the dosage of superplastcizer. And also cement pastes with metakaoline as a partial replacement of cement show a dilatant behavior. Dilatancy is heavily influenced by W/S ratio and by the amount of metakaoline. However the thixotropy of the pastes is increased by silica fume.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.228-229
• /
• 2006

본 연구에서는 PCB에 적용하기 위한 폴리머 타입 후막저항의 하나로서, 포토공정으로 저항 패턴의 형성이 가능한 페이스트를 제조하였다. 기존의 폴리머 후막저항은 스크린 인쇄를 패터닝의 주요 방법으로 하고 있어 패턴의 정밀성이 떨어지는 단점이 있었다. 이를 개선하여 고정밀 저항 패턴의 형성이 가능하도록 Photoimageable Resin을 저항 페이스트의 개발에 도입하였다. Acrylated oligomer 및 monomer, 그리고 Novolac Epoxy를 주 기지상 재료로서 사용하였으며, acrylate와 epoxy의 함량비에 따른 저항 페이스트의 현상성 및 시트저항을 평가하였다. 전도성 Filler 재료로 카본블랙을 이용하였는데, 그 물리적 특성차와 함량이 저항 페이스트의 현상성과 저항값에 미치는 영향을 평가하였다. 실험결과 Acrylate와 epoxy의 비가 2.5:1일 때 현상성이 가장 양호하였으며, 이 조성에 XC72R 카본블랙을 2g 첨가하였을 때 시트저항의 평균값은 약 $6\;k{\Omega}\{\square}$였다.

• The Korean Journal of Rheology
• /
• v.5 no.2
• /
• pp.99-108
• /
• 1993

시멘트 페이스트의 비선형적 점탄성 거동을 연구하기 위해 동적인 전단 유동 시험 이 수행되었다. 전단응력과 전단변형 또는 전단변형율간의 관계를 보여주는 히스테리시스 곡선을 얻기 위하여 전단응력이 연속적으로 측정되었다. 이는 기존의 주파수 혹은 변형의 증가에 의한 실험(frequency or strain sweep experiment)과는 달리 저자에 의해 수정된 점 성계(HAAKE Model RV20/RC20/CV20N)의 조정프로그램을 이용하여 수행되었다. 동적 전 단유동시험에서 얻어진 히스테리시스곡선은 시멘트 페이스트가 전단변형을 받는 동안 선형 탄성, 입자간 연결고리의 파괴 및 점성유체 거동을 보여준다. 측정된 항복전단응력은 전단변 형율의 증가에 따라 파우어함수(Power low equation)에 의해 증가함을 보여준다.

• Journal of the Korean Chemical Society
• /
• v.51 no.2
• /
• pp.171-177
• /
• 2007

Polymer-based electrically conductive pastes have been used to make the conductive paths between voltage sources and devices. The pastes used for these applications consist of two main components: a polymer binder and a conductive filler. Having both low viscosity and good metal-encapsulating properties, cellulose acetate butyrate (CAB) was regarded to be a good candidate as a binder for the conductive paste. We have prepared a formulation for a novel conductive paste based on CAB. Preliminary studies showed that this conductive paste revealed stable conductivity, together with uniform coating and flexibility.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.3
• /
• pp.90-96
• /
• 2018

In this study, the mechanical and micro-structural change of cement pastes incorporating Stainless-Steel Slag Argon Oxygen Decarburization Slag (STS-A) containing ${\gamma}-C_2S$ as a carbon capture materials were investigated with carbonation curing condition. ${\gamma}-C_2S$ is non-hydraulic, therefore does not react with water. But ${\gamma}-C_2S$ has a reactivity under carbonation curing condition with water. The reaction products fill up the pore in pastes. The microstructure of STS-A blended cement pastes could be densified by this reaction. The pore structure of cement pastes incorporating STS-A was measured using mercury intrusion porosimetry (MIP) after carbonation curing ($CO_2$ concentration is about 5%). Also the fractal characteristics were investigated for the effect of carbonation curing on the micro-structural change of paste specimens. From the results, the compressive strength of carbonated specimens incorporating STS-A increased and pore-structure of carbonated paste is more complicated.