• Proceedings of the Korea Society of Design Studies Conference
• /
• 2000.11a
• /
• pp.36-37
• /
• 2000

20세기말부터 제2의 산업혁명으로까지 불리며 텔레비전 이후 가장 중요한 커뮤니케이션 수단으로 부상한 인터넷은 일상 생활, 가치관을 비롯하여 거의 모든 인간 활동 분야에 있어서 일대의 구조적 전환기를 맞게 했다 그러나 웹의 양적인 팽창에 비해 웹에 대한 체계적인 논의나 연구들이 아직까지는 급속한 웹 기반 기술의 발전에 비해 뚜렷한 학문적 성과로 병행 발전되지 못하고 있는 편이다. (중략)

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.44-45
• /
• 2002

일반적으로 노즐이나 오리피스로부터 방출되는 초음속 단일 자유제트 유동의 경우, 제트내부에서 발생하는 충격파 시스템이나, 제트경계의 형상 그리고 제트코어의 길이 및 초음속 영역의 길이 등은 종래의 연구로부터 비교적 잘 알려져 있다. 이들 연구에 의하면, 제트의 압력비가 어느 정도 증가하게 되면, 노즐 하류에서 제트내부에는 마하 디스크가 발생하게 되며, 제트유동은 압축과 팽창을 반복하는 구조로 된다. 또 노즐 출구로부터 마하 디스크까지의 거리와 마하 디스크의 직경 등은 노즐의 압력비의 함수로 주어진다고 알려져 있다.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 1999.03a
• /
• pp.25-31
• /
• 1999

암석 내에 포함된 불연속면으로 인하여 암석은 압축하중 하에서 복잡한 거동을 한다. 이러한 복잡한 거동은 변형률강화(strain hardening), 변형률연화(strain softening), 부피팽창(dilatancy)등의 비선형 거동을 포함하는데, 이들은 균열의 성장, 상호작용(interaction), 연합(coalescence) 등을 통하여 발생한다(Brace et al., 1972; Kranz, 1983). 이와 같은 암석의 비선형적 거동을 설명하기 위하여 여러 형태의 균열모형이 개발된 바 있다(Costin, 1985; Nemat-Nasser ＆ Horii, 1982; Wang & Kemeny, 1993; Jeon, 1998). (중략)

• Korean Journal of Animal Reproduction
• /
• v.21 no.2
• /
• pp.131-137
• /
• 1997

This study was carried out to investigate the in vivo development rates of vitrified-thawed mouse expanding, hatching and hatched blastoc ysts(BL). In vitro fertilization produced blastocysts were vitrified in EFS40(40% ethylene glycol, 30% Ficoll and 0.3 M sucrose in phosphate buffer saline containing 10% FBS). Expanding a and hatching blastocysts were equilibrated in 20% ethylene glyco](EG) for 5 min. before exposure to EFS40 at 25°C for 1 min., they were then vitrified in liquid nitrogen. Hatched blastocysts which cultured in m-CR1 medium supple mented 0.4% bovine serum albumin on day 5. were equilibrated in 10% EG for 5 min. and then vitrified in EFS40 for 30 sec. After thawing, re-expanding blastocysts were transferred to recipients(3 day of pseudopregnant) on one or both uterine horns(6-8 embryos per a horn). Preg¬n nancy rates of recipients and implantation were a assccessed by autopsy on 15 gestation. The res¬u ults obtained in these experiments were summar¬1 ized as follows; 1) The pregnancy and live fetus rates, for vitrified expanding BL(77.8 and 25.0%) and hatching BL(77.8 and 26.4%)n vitro were not significantly difference in those of control BL (66.7 and 42.9%: 83.3 and 40.4%), respectively, 2) in vitro development of vitrified hatched BL was 34.0%. and 3) in vivo developmental rate of vitrified hatched BL was only 33.3%. These results suggested that proposed rapid vitrification p procedures used EFS40 cryoprotectant can be effectively performed in mouse expanding Ihatching blastocysts and that mouse blastocysts a after being hatched from zona pellucida can be successfully cryopreserved.

• Journal of Energy Engineering
• /
• v.21 no.4
• /
• pp.402-410
• /
• 2012

A two-loop Rankine cycle for engine waste heat recovery of gasoline vehicle has been investigated. Water-steam cycle as a high-temperature (HT) loop for exhaust gas heat recovery and R-134a cycle as a low-temperature (LT) loop for both heat recovery of the engine coolant and the residual heat from the HT loop were considered. Energy and exergy analysis was performed to investigate the performance of the system. Because two volumetric expanders are used for the HT and LT loop, the sizes of two expanders are very important for the optimization of the system. The effects of pressure ratio of the HT loop, considering the size of the HT expander, and the condensation temperature of LT loop on the performance of the system at a target engine condition were investigated. This study shows that about 20% of additional power from the engine waste heat recovery can be obtained at the target engine condition.

• Resources Recycling
• /
• v.21 no.6
• /
• pp.12-22
• /
• 2012

This study investigated a utilization technology of light burned dolomite. light burned dolomite ($CaMg(CO_3)_2$) generated in furnace (steel manufacturer) is an alternative to quick lime. Using light burned dolomite has an effect on reducing the consumption of fluorite slag MgO concentration in supersaturated solution by prolonging the life of softening effect. Armophous MgO, not containing periclase is formed by firing dolomite under $800^{\circ}C$. It has larger surface area and higher reactivity than periclase, and also shows better expansion effect than quicklime. Due to those effects, therefore, armophous MgO produced from light burned dolomite is used as an alternative expansion agent in mortar. In the experiment, characteristics of light burned dolomite were compared to those of existing expansion agents such as anhydrite and quicklime. Then, each expansion and shrinkage rates were measured over a period of about 3 months in both of 1m Jis mold at labscale and apartment mortar flooring at field scale. In the result, it was observed that light burned dolomite in mortar flooring more compensates for the expansion and shrinkage rates than the existing expansion agents, showing low expansion rate of below 0.05% and also decreases the crack.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.71-75
• /
• 2009

Test results of combustion chamber to verify the operation and the combustion performance at low pressure, design and off-design conditions for 30ton-class liquid rocket engine were described. The combustion chamber has nominal chamber pressure of 60 bar, propellant mass flow rate of 89 kg/s, and nozzle expansion of 12. Effects of chamber pressure on combustion characteristic velocity are largely affected by mixture ratio. The specific impulse of combustion chamber is proportional to the chamber pressure regardless of the mixture ratios. The present results can be used as the base to predict the combustion performance of large sized chamber at high pressure while demonstrating the possibility of low pressure firing test of large sized chamber.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.1
• /
• pp.18-25
• /
• 2001

The results of systematic numerical experiments of secondary gas injection thrust vector control are presented. The effects of secondary injection system such as injection location and nozzle divergent cone angle onto the overall performance parameters such as thrust ratio, specific impulse ratio and axial thrust augmentation, are investigated. Complex nozzle exhaust flows induced by the secondary jet penetration is numerically analyzed by solving unsteady three-dimensional Reynolds-averaged Navier-Stokes equations with Baldwin-Lomax turbulence model for closure. Numerical simulations compared with the experiments of secondary air injection into the rocket nozzle of $9.6^{\cire}$ divergent half angle showed good agreement. The results obtained in terms of overall performance parameters showed that locating the secondary injection orifice further downstream of primary nozzle ensures the prevention of occurrence of reflected shock wave, therefore is suitable for efficient and stable thrust vectoring over a wide range of use.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.11b
• /
• pp.18-30
• /
• 2002

이암 및 셰일은 점토를 함유하고 있어 풍화작용을 받을 경우 공학적 성질이 급격히 변화하여 강도 저하, 내구성저하현상 및 토사와 유사한 거동을 보이는 등 토목공사에 위험한 요소가 되고 있다. 풍화된 시료엔 대한 실험용 시료 가공이 어렵고 적용 가능한 실험법이 적어 공학적 특성이나 거동을 정량적으로 파악하는 기법이 다른 암종에 비해 극히 제한된다. 현재까지 강도측정과 같은 일반적인 물성의 단순측정보다는 내구성을 분석하는 슬레이킹 내구성 시험 (Slake durability test), Modified Jar test, 팽창율 측정시험 (Swelling test) 등의 정량화 시험법이 주로 사용되고 있으며 국내 현장에서도 적용을 권장할 수 있다. 이러한 실험치의 해석에서 단일 실험치 (예: 팽창율)만으로 지질공학적 특성을 파악하는 경우 잘못된 판단을 할 수도 있으므로, X선 회절분석시험 (XRD: X-Ray Diffraction Test), TG-DTA분석, 주사전자현미경 (SEM: Scanning Electron Microscope) 이미지 분석, 투수계수 측정실험 등도 함께 수행하여 실험결과를 종합적으로 해석하는 것이 바람직하다.

• 기계와재료
• /
• v.24 no.1
• /
• pp.26-35
• /
• 2012

가스액화플랜트는 질소, 산소, 헬륨 등 고순도의 가스를 효율적으로 저장 및 운송을 위해 가스를 액체로 변환하는 플랜트로, 대표적인 플랜트로는 질소, 산소, 아르곤 등의 가스를 생산하는 공기분리플랜트, 헬륨액화플랜트, 수소액화플랜트, 천연가스액화플랜트 등이 있다. 질소, 산소, 수소 등의 가스는 산업의 전반적인 분야에서 널리 사용되고 있으며, 국내의 경우 철강, 반도체, 디스플레이제조산업 등 가스 다소비 분야의 비약적인 발전에 따라 급격하게 수요가 증가하고 있는 상황이다. 대용량의 가스액화플랜트는 원료로부터 불순물을 제거하고, 팽창 또는 열교환 과정을 통해 가스를 액체로 변환하는 극저온기술로 주로 구성되며, 이와 같은 과정은 압축기, 열교환기, 증류탑, 팽창터빈, 콜드박스 등의 구성요소에 의해 구현된다. 따라서 가스액화플랜트에서 효율적인 극저온의 생성 및 유지는 플랜트의 경제성 제고를 위해 핵심적인 요소이다.