• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.10a
• /
• pp.279-282
• /
• 2010

스티로폼샌드위치패널은 건식공법의 시공편리성, 경제적인 공사비용, 뛰어난 단열성능으로 공장이나 창고건축물을 중심으로 많이 사용되고 있다. 그러나 스티로폼의 여러 가지 장점에도 불구하고 화재에 취약한 단점이 있어 최근 난연성능이 보완된 난연스티로폼패널의 사용이 증가하고 있다. 최근 건축현장에서, 가짜 난연스티로폼패널 사용이 문제되고 있으나 난연성능의 현장 확인에 어려움이 있고 콘칼로리미터 등의 난연성능평가에 시간과 비용이 소요된다. 본 연구에서는 콘칼로리미터를 통해 난연성능이 확보된 난연 스티로폼패널의 심재와 일반스티로폼패널 심재를 대상으로 근-적외선 분광분석을 수행하여 난연성능의 유무에 따라 상이하게 나타나는 고유스펙트럼 흡수를 측정하였다. 각 제품마다 측정된 고유스펙트럼은 통계처리를 통하여 난연스티로폼의 진위여부를 현장에서 구별할 수 있음을 확인하였으며, 비용효율이 높은 현장평가방법으로의 적용이 가능함을 실험을 통해 입증하였다.

• Journal of Korea Port Economic Association
• /
• v.27 no.1
• /
• pp.185-212
• /
• 2011

The purpose of this paper is to show the empirical analysis way for measuring the seaport efficiency by using the previous radial model and the newly modified non-radial models( panel additive model, panel RAM model, and panel SBM model)with Spearman rank order correlation coefficient(SROCC) for 20 Korean ports during 11 years(1997-2007) for 1 inputs(port investment amount) and 4 outputs(Number of Ship Calls, Port Revenue, Customer Satisfaction Score for Port Service and Container Cargo Throughput). The main empirical results of this paper are as follows. First, consistency ratio of SROCC in terms of efficiency scores between radial and panel Additive model was over about 76% and overall consistency ratio was about 71.6%. Second, an efficiency of panel RAM model was higher than that of radial model with similarity. However, panel SBM model shows the very similar efficiency scores with panel radial model. Third, the slack size of radial model is smaller compared to non-radial model. Models' ranking orders in terms of efficiency scores, number of efficient ports are panel RAM model, panel SBM model, and radial model. The order from the minimum efficiency scores was the same order like just before. The policy implication to the Korean seaports and planner is that Korean seaports should introduce the new methods like non-radial models(panel additive model, panel RAM model, and panel SBM model) for measuring the port performance.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.2
• /
• pp.32-42
• /
• 1995

When the thickness becomes so small as in the case of the trailing edge of the propeller blade or when the curvature of the surface varies rapidly as in ship stem, the existing panel method employing a flat-surface panel, obtained by collapsing the original non-planar surface into its mean location, suffers the leakage problem and also gives inaccurate induction upon the field point very close to the panel. The hyperboloidal panel deals with the induction from the dipole distributed on the non-planar surface without approximation, overcoming the defects of the flat-surface panel. This paper introduces two distinct derivations of the formulae to compute the integral for the potential induced by a dipole of uniform density distributed on a non-planar hyperboloidal surface element. One method is based on the Gauss-Bonnet theorem and the other is based on the transformation of the surface integral into a line integral.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.594-597
• /
• 2004

본 연구에서는 진공 인라인 실장 기술을 이용하여 제작한 플라즈마 디스플레이 패널(PDP)의 전기적 광학적 특성을 측정하여, 일반적인 실장 방법을 이용한 PDP의 특성과 비교 분석하였다. 본 실험에 사용된 패널은 Screen Printer를 이용한 상 하부전극과 하판 유전체, 상판 투명유전체, 격벽 및 E-Beam Evaporation 방법을 이용하여 증착한 MgO 보호막으로 이루어져 있으며, 분위기 온도 $430^{\circ}C$, Ne-Xe(4%) 400[torr]압력 하에서 실장하였다. 높은 분위기 온도로 인하여 MgO에 Crack이 발생하였으나 지속적인 연구를 진행하여 최적의 실장 조건을 확립할 수 있었다. 이러한 진공 인라인 실장 기술은 추가적인 Annealing 공정이 필요하지 않아 공정의 단축을 모색할 수 있으며, MgO의 수화를 제거함으로써 일반적인 실장 방법을 이용한 패널보다 더 우수한 전기적 광학적 특성을 얻을 수 있었다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2009.04a
• /
• pp.286-293
• /
• 2009

본 연구에서는 가연성 단열재를 포함하는 샌드위치패널에 대한 선진국의 화재안전성 시험 방법 및 난연성등급 방법에 대한 특징 및 문제점 등을 소개함으로서, 우리 사회의 막연한 화재위험 의식을 불식하고, 근본적인 샌드위치패널의 화재 안전성 대책에 대한 이해를 돕고자 한다

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.6
• /
• pp.1397-1405
• /
• 2014

Usually unit-nonresponse or item-nonresponse occurs in the survey. In case the rate of nonresponse is high, the analysis ignoring nonresponse may cause the wrong effect. The characterization of nonresponse is required. In a cross-sectional data, it is possible to study the characteristics of item-nonresponse but it is hard to study the characteristics of the unit-nonresponse. In order to identify the characteristics of the unit-nonresponse, this study used the first-year student of middle schools in the Korea children and youth panel survey (KCYPS) data. We investigated the handling situation of nonresponse and analyzed the characteristics of the unit-nonresponse. Most of the papers applied the way of getting rid of nonresponse, so that there was little paper using weights. In this paper, we compared the results of the analyses depending on whether the weight is used or not. The method of using weights showed statistically significant results much more than that of removing. More discussion will be needed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.638-643
• /
• 2019

In order to reduce the cost and weight of the soft-foamed instrument-panel (IP), it was developed the new IP which is made by the two kinds of injection methods. One is the compression-injection with back-foamed foil inserted, and the other is two-shot injection with the passenger airbag door. We named it 'IMX-IP' which means that all components ('X') of the IP with different resins are made in a mold. The development procedure of this technology was introduced (1) Design of the new injection mold through TRIZ method, (2) Optimization of the injection conditions and back foamed-foil for minimizing the foam loss and thickness deviation, (3) Development of CAE for two-shot injection compression, (4) Reliability performance test and application to the mass production. The reduction of the processes through the two-shot injection with back foamed-foil inserted made it possible to enhance soft feeling on IP and reduce the cost and weight simultaneously.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.4
• /
• pp.85-94
• /
• 2004

Waste wood-plastic composite panels are made on different hot press molding conditions, and tested for apparent density, water absorption, expansion in thickness and flexural strength. From the test results, regardless of molding temperature and molding time, the apparent density of the composite panels is increased with an increase in the molding pressure, while their water absorption is decreased with an increase in the molding pressure. The flexural strength of the composite panels is markedly increased with increasing molding pressure, molding temperature and molding time, and tends to become nearly constant at a molding temperature of $120^{\circ}C$ and a molding time of 15min.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.2
• /
• pp.155-162
• /
• 2020

Since the third industrial revolution has been started in the 1980s, the form of buildings has been varied and atypical by the development of building technology. Such free-form building has a curved shape unlike the existing standard buildings, and to realize this, it is necessary to manufacture the free-from panel. The shape of the free-form panel must satisfy a limited error ratio compared with the design shape, and the technology to produce free-form panels is very difficult. However, there are many problems such as enormous cost and construction waste generation when implementing free-from construction. Therefore, the development of free-form panel manufacturing technology should be made to solve the problems caused by the free-form construction. In this study, the error rate analysis of the mixed mortar panel was conducted by selecting the proper mixing ratio of the mixed mortar for the shape of the free-form panel.

• Survey Research
• /
• v.10 no.1
• /
• pp.73-89
• /
• 2009

Even though panel surveys are very useful in estimating the change between time points, they suffer from sample distortion as survey rounds proceed due to panel attrition and conditioning. This study is to report the statistical aspects of KBS-MBMR's five-rounds panel survey for the 2007 Presidential Election of Korea. Main findings are as follows. First, the attrition propensities were higher among women, among the young and the old aged, and among "None"/"Don't Know"/"Won't Say"(DK) respondents for the question asking preferred candidate. Second, there existed the conditioning effect that pushes the respondents to choose one candidate in hurry. Third. repeated measurements of the survey did not influence panel respondents on the choice of preferred candidate. if DK respondents are set. aside, and on the final voting intention of panel respondents.