• 한국콘텐츠학회논문지
• /
• 제18권10호
• /
• pp.361-367
• /
• 2018

이 연구의 목적은 불화 수소산 에칭 처리가 안정화된 정방 정계 지르코니아 다결정 (Y-TZP)의 결합 강도에 미치는 영향을 평가하는 것이었다. 4 그룹의 지르코니아 - 수지 시멘트 시편을 준비 하였다. 1) ZGS 그룹 (zirconia, no treatment) 2) ZGSH 그룹 (zirconia, hydrofluoric acid etching treatment) 3) H-ZGS 그룹 (Hybrid zirconia, no treatment) 4) H-ZGSH 그룹 (Hybrid zirconia, hydrofluoric acid etching treatment). 지르코니아와 도재 사이의 전단 결합 강도는 Instron Universal Testing Machine (ModelBBP-500, Instron Corporation, Kyunggi, Korea)을 사용하여 측정 하였다. 독립표본 t-test와 two-way ANOVA (${\alpha}=0.05$)를 사용하여 데이터를 통계적으로 분석했다. 세라믹 - 수지 시멘트 결합강도는 불화 수소산 에칭 처리에 영향을 받았다 (p <0.05). 파단 표면의 디지털 현미경 검사는 불화 수소산 에칭 처리한 표면처리 된 지르코니아 및 하이브리드 지르코니아 그룹에서 접착성 및 응집성 파절이 동시에 발생하는 결함을 보였다.

• 대한소아치과학회지
• /
• 제32권1호
• /
• pp.1-6
• /
• 2005

외상에 의한 영구치의 손상은 유치열에서 영구치열로 이환되는 $8{\sim}10$세 경에 가장 빈발하며, 치아의 파절, 전위 함입, 정출, 탈구 등일 나타난다. 이중 치아가 치조와에서 이탈되는 손상을 받았을 경우에는 일반적으로 원래의 치조와내에 이탈된 치아를 재위치 시키고 고정하여 치유를 도모한다. 본 증례는 원광대학교 치과병원에 내원한 2명의 환아로 외상을 받은 후 각각 다른 기관에서 응급처치를 받았으나, 적절히 정복되지 못하여 본원에 내원 시 조기접촉을 보이고 있었다. 이에 고정된 치아를 다시 탈구시켜 원래의 치조와내에 재식하고 고정하였다. 적절하지 못한 재식은 지속적인 교합접촉을 일으킬 수 있으며, 이로 인한 치유의 지연 및 저작곤란, 부정교합 등을 야기할 수 있다. 외상 환자를 가장 먼저 접하게 되는 응급실이나 의원에서는 외상치의 처치에 대하여 숙지하고 있어야 하며 적절한 의뢰가 이루어져야 한다.

• 대한소아치과학회지
• /
• 제43권3호
• /
• pp.292-298
• /
• 2016

본 연구의 목적은 최근 개발된 두 종류의 자이오머(Beautifil Flow Plus F00, Beautifil Flow Plus F03)의 불소유리량과 열순환 후 압축강도를 기존의 자이오머, 레진 강화형 글라스아이오노머, 복합 레진과 비교하여 평가하는 것이다. 불소 유리량 측정을 위해 군별로 15개씩의 시편을 제작하여 31일간 pH/ISE meter를 이용하여 불소 농도를 측정하였고 압축 강도 측정을 위해 군별로 15개씩의 시편을 제작하여 열 순환 후 만능 경성 시험기를 이용하여 시편이 파절된 시점의 최대강도를 측정하였다. 최근 개발되어 출시된 자이오머는 기존의 자이오머에 비해 불소 유리량은 유의하게 증가하였다. 압축 강도도 개선되었으며, 복합 레진과 비교하여 통계적 유의 차가 없는 것으로 나타나 임상적 가치가 높은 것으로 사료되었다.

• 구강회복응용과학지
• /
• 제22권2호
• /
• pp.111-123
• /
• 2006

A Study on the Fracture Strength of All-Ceramic Crown according to the Zirconia Coping Design using CAD/CAM System L. Bulgan, In-Ho Cho, Soo-Yeon Shin Department of Prosthodontics, Graduate School, Dankook University The fracture strength of prosthesis is important, because it affects the function, and long term success of prosthesis and teeth. The purpose of this study was to compare the fracture strength of zirconia coping designs. Experimental test group were classified into three designs according to coping design, Modified design: Zirconia coping margin was located at 1mm above the axiogingival line angle. Collarless design: The coping margin terminated at the axiogingival line angle Butt design: The coping margin was extended to the finishing line of prepared margin. A $Cercon^{(R)}$(Degussa, Germany) CAD/CAM system was used to make the zirconia coping. Fracture strength was measured using loading machine at a cross head speed of 1mm/min. The results were statistically analyzed using the one-way ANOVA and multiple comparison test. Statistical significance was set in advance at the probability level of less than 0.05. The result : I. Collarless($738N{\pm}155N$) and Modified($755N{\pm}185N$) groups showed significantly a lower fracture strength than Butt($1057N{\pm}262N$) group(p<0.05). II. There were no statistical differences of the fracture strength between Modified($755N{\pm}185N$) and Collarless($738N{\pm}155N$) groups. III. When comparing the fractured surface, all the group showed porcelain fracture, which were fractured at the labial surface of baked porcelain The butt design of the zirconia coping has higher fracture strength than modified and collarless design.

• 대한치과보철학회지
• /
• 제36권6호
• /
• pp.888-899
• /
• 1998

In-Ceram system is one of contemporary esthetic all ceramic restorations and has relatively high flexural strength. The purpose of this study was to evaluate the marginal fidelity according to type of resin cement and measuring position, and to evaluate fracture strength according to type of resin cement. In this study, twenty seven In-Ceram crowns were fabricated on the metal master die of prepared maxillary right central incisor and devided into three groups. All specimens were cemented with Panavia 21 (group PV), Super-bond (group SB) and Lute-it (group LI) on the metal master die. After cementation, specimens were measured marginal gap between the margin of the In-Ceram crown and the finishing line of metal master die by using a stereomicroscope (SZ-ST, Olympus, Japan). Marginal gaps were recorded at the labial, lingual, mesial and distal measuring points on the metal master die. For the mesurement of fracture strength, lingual surfaces of cemented specimens were loaded at a distance of 1mm from incisal edge by using the Autograph S-2000 (Shimadzu, Japan). The results of marginal fidelity and fracture strength were statistically analyzed with the SPSS version 8.0 programs. The results of this study were as follows: 1. In comparison of marginal fidelity according to the measuring points, there was no significant difference. 2. The marginal fidelity according to the type of resin cement was decreased in order of group $LI\;(63.75{\mu}m),\;SB\;(77.78{\mu}m),\;PV\;(86.53{\mu}m)$, and there was significant difference between group LI and PV (p<0.05). 3. The fracture strength according to the type of resin cement was showed descending order of group $LI\;(60.00kg/cm^2),\;SB\;(56.80kg/cm^2),\;PV\;(56.11kg/m^2)$, but there was no significant difference.

• 구강회복응용과학지
• /
• 제18권2호
• /
• pp.113-118
• /
• 2002

Long bridge가 필요한 구강암종환자에게 자기공명영상을 촬영하여야 하는 경우, fiber reinforced polymer ceramics로 잠정보철물을 제작해준 경우 충분한 파절 저항성과 심미성을 얻을 수 있었다. 하지만, 여기에 대한 장기간의 연구와 관찰이 필요하리라 사료된다.

• 구강회복응용과학지
• /
• 제18권2호
• /
• pp.101-111
• /
• 2002

The purpose of this study was to evaluate the fracture strength of porcelain fused to gold crown and gold electroformed crown according to incisal and incisal under 3mm. In this study, 28 gold electroformed crown and 28 porcelain fused to gold crown were fabricated. Fracture strength testing was carried out using an Instron 8871(Instron Corporation, U.S.A) at a cross head speed of 5mm/min. All of the measurements were statistically analyzed by Independent t-testing, and k-s testing. Statistical significance was set in advance at the probability level of less than 0.05. All measurements were analized with Windows $SPSS^{(R)}$ Version 10.0 software for the personal computer. The results of this study were as follows; 1. Comparison by location (1) A compared fracture strength of incisal and incisal under 3 mm, there was statistical significant difference between gold electro -formed crown and porcelain fused to gold crown (p<0.05). 2. Comparison by loading (1) When compared fracture strength of incisal, there was no significant difference between gold electroformed crown ($619.90{\pm}53.54N$)and porcelain fused to gold crown($674.68{\pm}87.42N$). (2) When compared fracture strength of incisal under 3 mm, there was significant difference between gold electroformed crown($688.29{\pm}14.88N$) and porcelain fused to gold crown($1931.81{\pm}29.64N$) (p<0.05). 3. Mode of fracture When compared of fracture mode, gold electroformed crown showed mode of fracture and fracture line reaching coping region and porcelain fused to gold crown showed only in porcelain region.

• 구강회복응용과학지
• /
• 제24권2호
• /
• pp.183-192
• /
• 2008

미디어, 인터넷, 상업용 광고 등 사회의 각 분야에서 미용에 대한 관심이 고조되는 상황에서 오늘날, 치과 보철수복은 단지 저작 기능을 회복시키는 것뿐만이 아니라 특히 심미적 관점에서 웰빙이나 삶의 질 향상에도 크게 기여하고 있다. 35세의 남성 환자로써 1) #11, 23의 금속-도재수복물의 도재 파절 2) 안모 수평기준선에 비해 기울어진 상악전치 절단연 3) 안모 수직기준선인 안모 정중선에 비해 편위된 치열정중선 4) 상악 전치의 대칭성 상실을 주소로 내원하였다. 환자는 임플란트 수복을 포함하여 전통적인 고정성 보철 치료로 안모 개선을 요구하였다. 일반적으로 상악 전치부에서 전통 보철이나 임플란트 보철 시술 목적 중의 하나가 치아구도, 치아-안모구도, 그리고 안모구도에서 치열이 매력적으로 그리고 아름답게 느껴지도록 심미 보철물을 제작해 주는 것이다. 본 증례에는 연조직과 경조직의 증대술과 성형술을 바탕으로 교정과, 구강악안면외과, 그리고 보철과가 협진을 통해 자연치와 임플란트를 이용한 금속-도재 수복물로써 기하학적 측면에서 치열의 심미성을 향상시킨 결과를 얻었기에 이를 보고하는 바이다.

• 대한치과보철학회지
• /
• 제30권1호
• /
• pp.65-72
• /
• 1992

The purpose of this study was to evaluate the flexure stregth of posterior 4-unit acrylic resin bridge with different pontic designs : 1) Conventional pontic 2) Hygienic pontic and 3) Modified hygienic pontic. All specimens were made of self-curing acrylic resin for provisional restorations. Self-curing acrylic resin was filled in a silicone mold by the drop-on technique ; and was polymerized in a pressure spot under 20 psi pressure. The test specimens which were simply shaped posterior 4-unit bridge were 38mm ion 4mm wide, and 35mm thick(connector : 3mm thick). Each specimen was subjected to an increasing load of Instron machine with its tip centered on the specimen at 90-degree angle, and the machine was operated with its load cell of 50kg and its crosshead speed, 2mm/minute : and then the load values at the moment of the fracture of them were recorded. This study was also performed to analyze their stress distributions by the finite element method. The obtained results were as follows : 1. Flexure strength of the hygienic pontic(9.78kg) and the modified hygienic pontic(10.17kg) was higher than that of conventional pontic(6.96kg). But no significant difference was found between the hygienci pontic and the. modified hygienic pontic. The above statistic values were appraised by ANOVA and Duncan's multiple range test 2. Stress was concentrated on the middle portion in every group : and the stress of conventional pontic was found the greatest of all pontic designs.

• 대한치과보철학회지
• /
• 제30권1호
• /
• pp.73-83
• /
• 1992

Now composite resin restoration is clinically accepted in the repair of fractured PFM case, many mechanical surface treatment methods are performed to increase retentive force. The main purpose of this study was to compare the retentive force among the possible surface treatments and to insure the best method for the clinical application to the fractures porecelain and the exposed metal surface. To compare and to analyze the retentive force of repair resin, porcelain specimen were divided into 2 groups, etching group and non-etching group, and etching group were treated with 37% $H_3PO_4$, 1.23% APF, 10% HF and non-etching groups were treated with diamond bur, micro-sandblasasting. Also, metal specimens were divided by 2 groups : one was non-precious metal group which was treated with diamond bur, micro-sandblasting and tin plating and electrolytic etching, the other was precious metal group which was composed of micro-sandblasting treatment only and tin plating treatment with micro-sandblasting. Each specimen had been restored for 48 hours and the bond strength of each specimen was calculated with Universal testing machine. The results were as follows : 1. Porcelain specimen had higher bonding strength than metal specimen for the repair resin(P<0.01). 2. In porcelain specimen, 10% HF etching group had the highest bonding strength among etching and non-etching group. 3. Metal specimen treated with micro-sandblasting had highest bonding strength among the non-sandblasting had hightest bonding strength among the non-precious group, tin plating group had higher bonding strength than micro-sandblasting group between the precious metal groups. 4. Bonding strength of tin plating was increased in precious metal group only.