• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.952-953
• /
• 2008

전기제동의 영역확대는 전동차의 성능향상을 위하여 연구가 지속되고 있으며 전기제동으로 전동차를 정차시키는 방법을 사용할때 공기제동은 정차 후 정지를 유지하는 정차브레이크의 기능만 필요하게 된다. 정지 후 전동기의 회전을 방지하여야 하므로 구배가 있는 곳에서 전기제동으로 정차시킬 때는 정차브레이크를 사용하기 이전까지 전력변환기는 정지 토크를 발생하는 기능을 갖고 있어야 한다. 본 연구에서는 정지 토크를 발생시키기 위하여 구배로 인한 부하 토크를 추정하여 전동차를 정차시키는 방법에 관한 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.1-8
• /
• 2019

Most of rotor resistance estimators utilizes Classical qd Model (CQDM) and Alternate qd Model (AQDM). The rotor resistance estimators based on both models were shown to provide an accurate rotor resistance estimate under conditions where flux is constant such as a field-oriented control (FOC) based induction motor drives. Under the conditions where flux is varying such as a Maximum torque per amp (MTPA) control, AQDM based rotor resistance estimator estimates actual rotor resistance accurately even in different operating points. However, CQDM based rotor resistance estimator has not been investigated and its performance is questionable under condition where flux level is varying. Thus, in this work, the performance of CQDM based rotor resistance estimator was investigated and made comparisons with AQDM based estimator under conditions where flux level is significantly varying such as in MTPA control based induction motor drives. Unlike AQDM based estimator, the laboratory results show that the CQDM based estimator underestimates actual rotor resistance and exhibits an undesirable dip in the estimates in different operating points.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.6
• /
• pp.531-536
• /
• 2002

This paper investigates the problem of the speed controller of conventional speed sensorless stator flux-oriented(SFO) induction motor drive, and proposes a robust speed controller to solve the conventional problem. In the proposed method, a robust speed controller for speed sensorless SFO system Is designed by taking advantage of disturbance torque observer and using feedforward.

• Journal of Power System Engineering
• /
• v.15 no.4
• /
• pp.65-74
• /
• 2011

이 논문은 비선형 시스템에 대해 bilinear 강인제어기를 설계하는 새로운 방법을 제시한다. 이 설계방법은 골칫거리인 비선형 영향을 나타내는 무거운 질량을 가지고 진동하는 시스템을 제어하기 위한 새로운 대안이고 진전된 방법이다. 이 설계 과정에, hydrostatic 구동기로 구동되는 킬(용골)이 주어진다. 첫 단계로 킬은 물리적으로 여러 한정된 질량으로 모델화된다. 물리적 모델에 근거한 수학적인 모델을 유도하는 방법은 해밀턴 원리를 적용한 유한요소법을 사용하였다. 즉, 수학적 모델은 여러 서브시스템으로 구성된다. 이것은 주어진 물리적인 시스템에 대해 기준이 되는 시스템이다. 회전하는 구동기에 대한 물리적 모델에 근거하여, 과도 거동은 구동기의 베어링에서 측정되는 운동 현상으로부터 유도된다. 물리적인 시스템은 bilinear 시스템으로 구성하였다. 이 시스템에 근거하여, 요트 킬의 거동을 제어하도록 bilinear 관측기를 설계한다. 구동기의 속도, 토크, 밸브에서의 유량 등이 관측기를 구성하는데 필요한 데이터들이다. 시뮬레이션 결과에 의하면 비선형성에 대한 추정과 보상을 통하여 무거운 질량을 갖는 회전축에 대한 위치와 힘을 제어하는 설계에 유용한 접근법임이 증명되었다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.5
• /
• pp.343-351
• /
• 2010

This paper proposes a new fuzzy speed controller based on the Takagi-Sugeno fuzzy method to achieve a robust speed control of a permanent magnet synchronous motor (PMSM). The proposed controller requires the information of the load torque, so the second-order load torque observer is used to estimate it. The LMI condition is derived for the existence of the proposed fuzzy speed controller, and the gains of the controller are provided. It is proven that the augmented control system including the fuzzy speed controller and the load torque observer is exponentially stable. To evaluate the performance of the proposed fuzzy speed controller, the simulation and experimental results are presented under motor parameter variations. Finally, it is clearly verified that the proposed control method can accurately control the speed of a permanent magnet synchronous motor.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.867-872
• /
• 2022

The effect of load is an important factor in precise speed control of a motor. n this study, we design a state observer that can estimate and define one state of disturbance including errors and nonlinear terms of mathematical models, which is not easy with a mathematical model. Then, the observation gain is set so that the estimation error of the state observation converges to 0, and the estimated state is used in the back stepping controller to design a controller capable of precise speed tracking. As a result of applying to 1 [hw] class Interior Permanent Magnet Synchronous Motor, excellent stste variable observation and tracking performance can be confirmed.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.2
• /
• pp.181-188
• /
• 2010

This paper presents the control algorithm of active walking aids estimating external torque of the wheels from user's will. Nowadays, interest of the walking aids is increased according to the increase in population of elder and handicapped person. Although many walking aids are developed, most of walking aids don't have any actuators for its movement. However, general walking aids have weakness for its movement to upward/download direction of slope. To overcome the weakness of the general walking aids, many researches for active type walking aids are being progressed. Unfortunately it is difficult to precision control of walking will during its movement, because it is not easy to recognize user's walking will. Many kinds of methods are proposed to recognize of user's walking will. In this paper, we propose control algorithm of walking aids by using torque estimation from wheels. First, we measure wheel velocity and voltage at the walking aids. From these data, external forces are extracted. And then walking will that is included by walking velocity and direction is estimated. Finally, walking aids are controlled by these data. Here, all the processes are verified by simulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.2
• /
• pp.131-136
• /
• 2006

This paper described a robust control of an induction motor using a disturbance cancellation observer of a feedforward control with Matlab simulink. The speed response of conventional PI controller characteristics is affected by variation of load torque disturbance. In this system, the speed control characteristics using a feedforward control toughen about a load torque disturbance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.511-518
• /
• 2021

In order to obtain a good tracking performance of the motor, it is necessary to design a controller that can respond to a disturbance by including a disturbance observer. The disturbance observer of the motor is designed to estimate the load torque and the back electromotive voltage based on the first-order low-pass filter. A PI controller and an IP controller were designed to compare the correlation between the disturbance observer and the controller and to obtain improved control performance. To check the performance of the designed observer and the controller, it was applied to a 120 [W] class BLDC motor. As a result, overshoot is reduced, and it can be seen that the steady-state error converges to zero.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.4
• /
• pp.575-579
• /
• 2006

In this paper, an instantaneous speed observer with a reduced order is proposed to implement an indirect control for a motor with excellent dynamic stability and performance in a very low speed region. The proposed observer can estimate the instantaneous speed in very low speed region and simplify the system configuration by adopting an least order load torque-inertia observer to estimate the load torque and the motor speed. Simulation are carried out to illustrate the performance of the proposed estimator at very low speed.