• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.413-414
• /
• 2010

Many researchs shows that modulus of elasticity in manual overestimates real modulus of elasticity of concrete as strength gets higher. In 2007 KCI Manual, formula in modulus of elasticity has revised that it should be demonstrated. In this study, modulus of elasticity in high strength was estimated by experiment and experimental value was compared with manual value.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.47-55
• /
• 2000

Non-linear behavior of rock under compression can be predicted by a crack model. Crack growth in rock renders rock anisotropic. The degree of anisotropy is explained in terms of elastic moduli as a function of load level. In this study, we calculate the changes of elastic moduli due to crack growth numerically by using a crack model and compare these values with experimental results obtained from the measurement of ultrasonic wave velocities. Image processing technique is used to obtain the initial crack information needed for the numerical calculation of elastic moduli.

• Journal of the Korean Society for Railway
• /
• v.11 no.1
• /
• pp.61-68
• /
• 2008

Resilient modulus has been used for characterizing the stress-strain behavior of subgrade soils subjected to traffic loadings. With the recent release of the M-E Design Guide, highway agencies are further encouraged to implement the resilient modulus test to improve subgrade design. The subgrade design for the trackbed, however, is primarily relying on the static test results such as $K_{30}$ and deformation modulus, Ev. Therefore applicability of the resilient modulus for the design of trackbed needs to be evaluated. In this study, physical property tests, unconfined compressive tests and resilient modulus tests were conducted to assess the resilient and permanent strain behavior of 14 cohesive subgrade soils. A predictive model for estimating the resilient modulus is proposed based on the results of unconfined compressive tests and tangent elastic modulus, unconfined compressive strength, failure strain, secant modulus at peak, and yield strain. The predicted resilient moduli using the predictive models compared satisfactorily with measured ones. Although the permanent strain occurs during the resilient modulus test, the permanent behavior of subgrade soils is currently not taken into consideration.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.33-40
• /
• 2011

The resilient modulus which is presented mechanical properties of compacted subbase material is the design parameter on the Mechanistic - Empirical pavement design guide. The compaction control method on the Mechanistic - Empirical pavement design guide will be the way to confirm whether the in-situ elastic modulus measured after the compaction meets the resilient modulus which is applied the design. The resilient modulus in this study is calculated by the neural network suggested by Korea Pavement Research Program, and degree of compaction as the existing compaction control test and plate bearing capacity test(PBT) was performed to confirm whether the in-situ elastic modulus is measured. The Light Falling Weight Deflectometer(LFWD) is additionally tested for correlation analysis between each in-situ elastic modulus and resilient modulus, and is proposed correlation equation and test interval which can reduced overall testing cost. Also, the subbase compaction control procedure based on the in-situ elastic modulus is proposed using the in-situ PBT and LFWD test result.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.123-126
• /
• 2011

The Finite element modelling is carried to predict the equivalent shear modulus of the Egg-Box core. Homogeneous material H130-foam core is employed to verify the prediction method of equivalent shear modulus. It shows a good agreement between the results of FE calculation and the values available in the reference. As a result of the present work, the equivalent shear modulus of Egg-Box core at various temperatures can be obtained.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.125-131
• /
• 2014

In order to develop stretchable substrates for wearable packaging applications, the variation behavior of elastic modulus was evaluated for transparent PDMS Sylgard 184 and black PDMS Sylgard 170 as a function of the base/curing agent mixing ratio. Both for Sylgard 184 and Sylgard 170, the true elastic modulus evaluated on a true stress-true strain curve was higher more than two times compared to the engineering elastic modulus obtained from an engineering stres-sengineering strain curve, and their difference became larger with increasing the stiffness of the PDMS. Sylgard 184 exhibited a maximum engineering elastic modulus of 1.74 MPa and a maximum true elastic modulus of 3.57 MPa at the base/curing agent mixing ratio of 10. A maximum engineering elastic modulus of 1.51 MPa and a maximum true elastic modulus of 3.64 MPa were obtained for Sylgard 170 at the base/curing agent mixing ratio of 2.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.3
• /
• pp.17-25
• /
• 1990

양표면은 무결점재를, 가운데 단판은 경사목리 및 목리방향의 할열을 가진 단판을 사용하여 제조한 3매 단판 적충재에 있어서 목리방향과 할열의 인장탄성계수 및 인장강도에 미치는 영향에 대하여 조사하였다. 또한, 비파괴 시험 방법인 응력파 실험에 의하여 각단판의 탄성계수를 측정하고, 이들 단판의 탄성계수로부터 단판적층재의 탄성계수를 예측하여 실측치와 비교하였다. 응력파에 의해 예측된 탄성계수는 인장실험으로부터 얻어진 결과와 거의 일치하였으며 인장탄성계수와 인장강도간에도 높은 상관관계를 나타내었다($r^2$=0.681). 인장강도에 있어서는 가운데 단판 할열의 영향은 나타나지 않았으나 목리의 경우 경사각이 증가함에 따라 인장강도가 감소하는 경향을 나타내었다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.4
• /
• pp.95-100
• /
• 1999

Dynamic measurements are used rather sparingly to determine the elastic modull of rock cores and modulus values are not much utilized in design practice. The reason seems to result from the general perception that values obtained by dynamic measurement are much higher (about 10 times) than those determined statically. This paper presents results from dynamic and static tests on rock cores. The findings are: 1) elastic modull can be consistently determined by laboratory seismic testing. 2) nonlinear deformation characteristics of rock cores was tentatively proposed with variation in elastic modulus with strain.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.301-308
• /
• 2000

Non-linear behavior of rock under compression can be predicted by a crack model. Crack growth in rock renders rock anisotropic. The degree of anisotropy is explained in terms of elastic moduli as a function of load level. In this study, we calculate the changes of elastic moduli due to crack growth numerically by using a crack model and compare these values with experimental results obtained from the measurement of ultrasonic wave velocities. Image processing technique is used to obtain the initial crack information needed for the numerical calculation of elastic moduli.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.147-155
• /
• 2010

A prediction model of resilient modulus($E_R$) was developed for recycled crushed-rock-soil mixtures. The evaluation of $E_R$, using the "orthodox" repeated loading tri-axial test, is not feasible for such a large-size gravelly material. An alternative method was proposed hereby using the subtle different modulus called nonlinear dynamic modulus. The prediction model was developed by utilizing in-situ measured shear modulus($G_{max}$) and its reduction curves of modeled materials using the large free-free resonant column test. A pilot evaluation of the model parameters was carried out for recycled crushed-rock-soil-mixture at a highway construction site near Gimcheon, Korea. The values of the model parameters($A_E,\;n_E,\;{\varepsilon}_r\;and\;{\alpha}$) were proposed as 9618, 0.47, 0.0135, and 0.8, respectively.