• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.8
• /
• pp.661-669
• /
• 2021

A mechanical stiffener has been mainly applied on a PCB to secure fatigue life of a solder joint of an electronic components in spaceborne electronics by minimizing bending displacement of the PCB. However, it causes an increase of mass and volume of the electronics. The high damping PCB implemented by multi-layered viscoelastic tapes of a previous research was effective for assuring the fatigue life of the solder joint, but it also has a limitation to decrease accommodation efficiency for the components on the PCB. In this study, we proposed high damping PCB with a multi-layered superelastic shape memory alloy stiffener for spatialminimized, light-weighted, high-integrated structure design of the electronics. To investigate the basic characteristics of the proposed PCB, a static load test, a free vibration test were performed. Then, the high damping characteristic and the design effectiveness of the PCB were validated through a random vibration test.

• Electrical & Electronic Materials
• /
• v.4 no.2
• /
• pp.143-149
• /
• 1991

전계가 인가된 H$_{2}$와 CO기체중을 통과하는 전자의 탄성과 비탄성 충돌 단면적을 볼츠만방정식을 이용하여 추정하였는데 충돌 단면적은 운동량변환, 진동여기, 해리, 전자 여기 및 전리 충돌 단면적을 이동속도의 측정값 및 계산값을 비교하므로써 결정하였다. Gibson과 Phelps가 각각 계산한 H$_{2}$ 및 CO의 운동량변환 충돌단면적을 본 연구의 결과와 비교하였으며 이를 기초로하여 온도는 293.deg.K, 상대전계의 세기 E/N은 1*$10^{-17}$ [V$cm^{2}$].leq.E/N.leq.200*10 $^{17}$ [V$cm^{2}$]의 범위에서 전자에너지 분포함수를 산출하였으며 이렇게 산출된 에너지 분포함수 및 충돌단면적은 실험적으로 측정한 모든 수송계수의 값들을 만족하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.445-445
• /
• 2010

전자빔 플라즈마는 전자 소스 부분, 전자 가속 부분, 전자빔 플라즈마 생성 부분으로 구성되어 있다. Hollow cathode형태의 전극과 anode역할을 하는 안쪽 그리드로 DC방전을 일으켜 전자를 발생시키고 안쪽 그리드와 바깥쪽 그리드 사이의 전압차이로 전자를 가속시킨다. 가속된 전자는 중성 가스와 비탄성 충돌을 하게 되어 플라즈마가 생성이 된다. 이러한 방식으로 생성된 전자빔 플라즈마는 플라즈마 형성 공간에 전기장이 없어 전자가 에너지를 얻을 수 없으며, 중성가스와 비탄성 충돌로 인해 에너지를 쉽게 잃기 때문에 전자 온도가 낮게 유지가 된다. 일반적으로 바깥쪽 그리드는 접지를 시켜 전자빔 플라즈마를 발생시키지만, DC 전원을 연결하여 양의 전압을 걸어주면 전자빔 플라즈마의 밀도는 크게 변하지 않고 전자 온도가 급격히 상승하게 된다. Ar 전자빔 플라즈마의 경우 바깥쪽 그리드가 접지에 연결되었을 경우 전자 온도는 0.5eV 정도인 것에 비해 바깥쪽 그리드에 20V DC전압을 걸어주면 전자 온도가 1eV 정도로 크게 증가를 한다. 그 이유는 바깥쪽 그리드 전압의 영향으로 전자빔 플라즈마 전위가 상승하게 되고 그 결과 높은 에너지를 가진 전자가 플라즈마 전위에 갇히게 되기 때문이다.

• Electrical & Electronic Materials
• /
• v.13 no.7
• /
• pp.8-13
• /
• 2000

• Journal of IKEEE
• /
• v.28 no.2
• /
• pp.221-227
• /
• 2024

This paper presents a smartphone-attachable vascular compliance monitoring module. The proposed sensor module measures photoplethysmogram (PPG) and reconstructs an accelerated PPG waveform. The feature points are extracted from the accelerated PPG waves, and vascular compliance is estimated using these extracted features. The module is powered via the smartphone's USB terminal and transmits the acquired waveforms along with vascular compliance values through Bluetooth. The transmitted waveforms and vascular compliance value are displayed through the smartphone application. This work proposes an assessment method for consistency of PPG instrumentation, and it was implemented in a processor of sensor module. The proposed sensor module can be easily attached to smartphone that does not support PPG instrumentation, providing simple measurment and numerical analysis of vascular compliance. To verify the performance of the implemented sensor module, we acquired vascular compliance and pulse pressure data from 29 subjects. Pulse pressure, which serves as a representative indicator of vascular compliance, was obtained using a commercial blood pressure monitor. The analysis results showed that the Pearson coefficient between vascular compliance and pulse pressure was 0.778, confirming a relatively high correlation between two metrics.

• Computational Structural Engineering
• /
• v.5 no.4
• /
• pp.5-12
• /
• 1992

고체역학의 구성은 크게 탄성론과 소성론(혹은 비탄성론)으로 나눌 수 있다. 전자는 회복가능한 변형을 후자는 회복불가능한 변형을 다루며, 이 두 이론은 응력과 변형의 실험적 관찰에 기초하기 때문에 거시적인 현상론의 성격을 갖고 있다. 체계적으로 잘 정리되어있는 탄성론과는 달리, 소성범위안에서의 복잡한 응력-변형도 관계는 종종 소성론으로 설명되지 않는다. 이점이 많은 연구자들 사이에 완전한 의견의 일치를 보지 못하고 있는 원인이나, 지난 수십년 동안 소성론의 기본틀에 대한 많은 진전이 있었다. 본 고에서는 소성론의 역사에 대한 "간략한" 역사적 고찰과 탄소성 "대변위"를 연구하는 현 역학사회의 관심의 촛점을 소개하고자 한다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.3
• /
• pp.53-60
• /
• 1973

Calculations of the temperature coefficients of the elastic surface wave velocity and delay time were performed for the propagation along the X axis of rotated Y cut plane of the LiNbO3 and LiTaO3. Measurements of the temperature dependence of delay time of the elastic surface wave were also performed for the propagation along the X axis of a 130" rotated Y cut plane of the LiNb03 at the temperature range from liquid He to room temperature. Experimental value 70$\times$10-6/$^{\circ}C$ of the temperature coefficient of the delay time of the elastic surface wave agrees well with the calculated value 72.7$\times$10-a/$^{\circ}C$. The temperature coefficient of delay time of elastic surface wave propagating along the X axis of a 130$^{\circ}$ rotated Y cut plane o( the LiNbO3 is approximately 16$\times$10-6/$^{\circ}C$ at the near temperature of liquid He.d He.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.6
• /
• pp.1-15
• /
• 1974

In this paper, the SH mode of elastic surface waves which are used for delay lines of elastic surface wave is the cretically analysed. It is shown that the SH mode has very large electromechanical coupling factor and propagates on the surface with very small decaying coefficient into the medium. In the case of P2T-4, the depth cf piezoelectric medium that contains 80% of energy is 190 wavelengths. An elastic surface wave delay line is discussed from the view point of 2-port network. Center frequency is shifted by the ratio of transducer electrode width to gap between transducer ellcerodes when electromechanical coupling factor is large. Tempera _ore coefficients for bulk waves of LiNbO3 and LiTaO3 are also calculated and the minimum temperature coefficient value of delay time is 5.4X 10-6/$^{\circ}C$ ia the case of transverse wave propagating along Z axis on LiTaO3. Experimental data are in good agreement with theoretical values of the temperature coefficients of delay time for elastic surface waves propagating along X axis of 130$^{\circ}$ and 64$^{\circ}$ rotated Y cut planes of the LiNbO3.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.4
• /
• pp.347-355
• /
• 2014

Thermal problems that are directly related to the lifetime of an electronic device are becoming increasingly important owing to the miniaturization of electronic devices. To solve thermal problems, it is essential to study thermal stability through thermal diffusion and insulation. A honeycomb sandwich plate has anisotropic thermal conductivity. To analyze the thermal deformation and temperature distribution of a system that employs a honeycomb sandwich plate, the thermal and elastic properties need to be determined. In this study, the thermal and elastic properties of a honeycomb sandwich plate, such as thermal conductivity, coefficient of thermal expansion, elastic modulus, Poisson's ratio, and shear modulus, are predicted. The properties of a honeycomb sandwich plate vary according to the hexagon size, thickness, and material properties.

• Geophysics and Geophysical Exploration
• /
• v.27 no.1
• /
• pp.69-83
• /
• 2024

Considering importance and specificity, site investigations for deep geological disposal of Spent Nuclear Fuel require stringent quality control, unlike general geotechnical investigations for tunnels and bridges. In this study, we present a case of selecting geophysical survey method for individual site investigation stage and preparing geophysical survey guideline. The proposed geophysical survey guidelines include procedures, considerations, and quality control for exploration planning, data acquisition, data processing, and interpretation. They comprehensively summarize the contents of airborne electromagnetic survey and seismic reflection survey.