• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.608-611
• /
• 2008

정보화 사회가 진행되어감에 따라 카메라 센서, 디지털 카메라, 휴대폰, 영상 관련디지털 기기들이 증가하고 이로 인하여 영상정보 서비스 기술의 중요성이 크게 부각되었다. 특히 멀티미디어 응용서비스 기술에서는 영상 정보가 필수적인데, 그 영상 정보의 양이 너무 방대하여 압축 부호화를 하여 사용되고 있다. 본 논문에서는 정지영상압축 방법 중 JPEG표준에서 제시한 4가지 동작 모드 중 베이스라인을 기반으로 하는 JPEG 알고리즘을 연구하여 Motion JPEG에서 동작 가능한 디코더를 C언어를 통해 시뮬레이션하고 최적화된 결과를 VHDL로 구현하였다. Motion JPEG의 무선전송 환경에 적용 가능한 불규칙한 스트리밍 방식의 입력데이터의 처리가 가능한 파이프라인 구조로 설계하였다. 설계결과 Xilinx XC3S1000 FG676-4 환경에서 66.130MHz의 동작속도를 나타내었고 최초 223클록의 딜레이 이후 매 클록마다 화소데이터를 얻을 수 있었다 Motion JPEG 디코더를 설계하는데 사용된 게이트는 총 54,143개이다.

• Electronics and Telecommunications Trends
• /
• v.23 no.6
• /
• pp.92-101
• /
• 2008

전원관리 및 전력소모 절감 기술은 휴대폰, 노트북 등의 휴대 기기 사용이 보편화되고 다기능화, 고성능화함에 따라 지속적으로 발전해 왔다. 특히 반도체 소자의 선폭이 나노미터급으로 초미세화 됨에 따라 누설 전류가 급증하고 칩의 처리 성능을 높이기 위해 클록 주파수를 높이면서 스위칭 전류 소모도 증가하므로, 이러한 동적/정적 전력소모 증가를 억제시킬 수 있는 다중 문턱전압 소자, DVFS, sub-threshold, 클록 게이팅, 저전압 회로 기술이 SoC 설계에 점진적으로 적용되고 있다. 이에 본 고에서는 휴대폰용 부품을 중심으로, 무선 통신 기능을 갖춘 기기의 전력소모 요인을 분석하고 배터리 사용시간을 연장시킬 수 있는 저전력 SoC 기술 동향을 살펴보고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.664-668
• /
• 2004

본 논문에서는 고속 이더넷의 고속의 이더넷의 물리계층에서 수신된 비트열로 부터 클록을 복원하고, 이 클록으로부터 동기된 비트열을 10b/8b 디코딩한 다음, 바이트열로 복원하여 데이터 링크계층의 MAC(Media Access controller)로 전송한다. PCS의 디코더는 S비트의 데이터와 제어신호를 추출하여 MAC으로 전달하는 기능을 수행한다. 즉 본 논문에서는 PCS기능 중 가장 중요한 요소인 10b/8b 디코더를 VHDL언어를 사용하여 기술하고 Xilinx ISE5.1를 이용하여 구현하였고, 입력 부분에 DDR인터페이스를 사용하였다. 구현한 결과 1056개의 게이트 사용하였으며, 10Gbps를 지원하기 위해서는 한 블록 당 2.5Gbps의 처리속도가 필요하다. 설계 모듈은 5.1Gbps의 처리 속도를 지원하여 관련 응용분야에서 사용이 가능할 것으로 사료된다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.577-582
• /
• 2016

The synchronous TDC(Time-to-Digital Converter) of counter-type using current-conveyor is designed by $0.18{\mu}m$ CMOS process and the supply voltage is 3 volts. In order to compensate the disadvantage of a asynchronous TDC the clock is generated when the start signal is applied and the clock is synchronized with the start signal. In the asynchronous TDC the error range of digital output is from $-T_{CK}$ to $T_{CK}$. But the error range of digital output is from 0 to $T_{CK}$ in the synchronous TDC. The error range of output is reduced by the synchronization between the start signal and the clock when the timing-interval signal is converted to digital value. Also the structure of the synchronous TDC is simple because there is no the high frequency external clock. The operation of designed TDC is confirmed by the HSPICE simulation.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.7
• /
• pp.47-55
• /
• 2013

Most of the applications implemented in embedded systems use timers equipped in MCU. The purposes of timer usage of the applications lie in a wide range of areas such as implementing software timers of real-time operating systems to measuring processing time of sensors. The elapsed times measured by the applications are various in length as well as in precision ranging from several us to several hundreds of ms. The paper analyzes the timing error factors caused by un- synchronizing timer clock pulse when timers are manipulated, and proposes a method of how to synchronize timer clock pulse to reduce the timing errors. As a result of an experiment, this paper shows that an error of 230us is reduced within 10us in case of appling the proposed method to a 4096Hz timer prescaled from 32768Hz by 8.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.8
• /
• pp.67-74
• /
• 2008

A compact and high-performance AES(Advanced Encryption Standard) encryption/decryption processor is designed by applying various hardware sharing and optimization techniques. In order to achieve minimized hardware complexity, sharing the S-Boxes for round transformation with the key scheduler, as well as merging and reusing datapaths for encryption and decryption are utilized, thus the area of S-Boxes is reduced by 25%. Also, the S-Boxes which require the largest hardware in AES processor is designed by applying composite field arithmetic on $GF(((2^2)^2)^2)$, thus it further reduces the area of S-Boxes when compared to the design based on $GF(2^8)$ or $GF((2^4)^2)$. By optimizing the operation of the 64-bit round transformation and round key scheduling, the round transformation is processed in 3 clock cycles and an encryption of 128-bit data block is performed in 31 clock cycles. The designed AES processor has about 15,870 gates, and the estimated throughput is 412.9 Mbps at 100 MHz clock frequency.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.28-33
• /
• 2008

This paper presents a continuous-time equalizer adopting a clock loss tracking technique for digital display interface. This technique uses bottom hold circuit to detect the incoming clock loss. The generated loss signal is directly fed to equalizer filters, building adaptive feed-forward loops which contribute the stability of the system. The design was done in $0.18{\mu}m$ CMOS technology. Experimental results summarize that eye-width of minimum 0.7UI is achieved until -33dB channel loss at 1.65Gbps. The average power consumption of the equalizer is a maximum 10mW, a very low value in comparison to those of previous researches, and the effective area is $0.127mm^2$.

• Journal of Korea Multimedia Society
• /
• v.12 no.3
• /
• pp.329-334
• /
• 2009

When an optical disc is being played. the pick-up converts light to analog signal at first. The analog signal is equalized for removing the inter-symbol interference and then the equalized analog signal is converted into the digital signal for extracting the synchronized data and clock signals. There are a lot of algorithms that minimize the BER in extracting the synchronized data and clock when high. density optical disc like BD is being played in low speed. But if the high-density optical disc is played in high speed, it is difficult to adopt the same extraction algorithm to data PLL and PRML architecture used in low speed application. It is because the signal with more than 800MHz should be processed in those architectures. Generally, in the 0.13-${\mu}m$ CMOS technology, it is necessary to have the high speed analog cores and lots of efforts to layout. In this paper, the parallel data PLL and PRML architecture, which enable to process in BD 8x speed of the maximum speed of the high-density optical disc as the extracting data and clock circuit, is proposed. Test results show that the proposed architecture is well operated without processing error at BD 8x speed.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.3
• /
• pp.128-133
• /
• 1998

This paper is study on performance analysis of modulator using direct digital frequency synthesizer of Initial Clock Accumulating Method. It has been generally used for PLL or digital frequency synthesizing method to be synthesizd randomly chosen frequency state. In order to improve disadvantage of two methods, we constructed modulator system using DDFS of Initial Clock Accumulating Method. We also confirmed the coherence frequency hopping state and possibility of phase control. The results obtained from the experiments are as follows; First, the synthesized output frequency is proportional to the sampling frequency, according to index, K. Second, the difference of the gain between the basic frequency and the harmonic frequencies was more than 50 [dB], that is, this means facts that is reduced the harmonic frequency factor. Third, coherence frequency hopping state is confirmed by PN code sequence. Here, we confirmed the proposed method cut switching time, this verify facts that is the best characteristic of the frequency hopping. We also verified the fact that the phase varies as the adder is operated set or reset.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.12
• /
• pp.1097-1104
• /
• 2016

The infrared camera is difficult to satisfy the RE-102 specification of Mil-Std-461. Especially, in the case of UAV electronics, shielded cable is not used, so it is difficult to meet the electromagnetic compatibility standard. In the RE-102 test of the IR camera for UAV, radiated noise exceeding 30 dBuV/m was observed in the range of 50 MHz to 200 MHz. As a result of pcb em scan, peak noise which caused by the harmonic frequency of the digital control signal clock was observed. Radiated noise was reduced by up to 22.9 dBuV/m by applying the spread spectrum clock generator(SSCG) with 3 % down spreading method to the camera control clock.