• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.5
• /
• pp.391-407
• /
• 2003

This study was conducted to investigate the factors affecting the born density of food and nutrition major and non-major university students in Seoul area. Data for food habits, dietary and health-related behavior were obtained by self administered questionnaires. BQI(bone quality index) of the subjects were measured by Quantitative Ultrasound (QUS). The results are summarized as follows: The average height, weight, BMI and osteopenia percentage of the major and non-major male and female student were l74.49cm, 67.05kg, 21.96 and 22.0%; l74.34cm, 65.98kg, 21.69 and 11.8%; l60.76cm, 54.48kg, 21.07 and 40.0%; l61.30cm, 54.22kg, 20.84 and 40.2%, respectively. The BQI of the major and non-major subjects were 108.07 and 110.47 in male student group, and 89.13, 88.18 in female student group, respectively. The T-score and Z-score of bone density of the subjects were not significantly different. Weight and BMI were positively related with BQI in male and female group but the relationship with BMI tended to be stronger in non-major female group than other groups. BQI was positively affected by exercise time, favorite food, and intake of seafood and tea in major and non-major male student group. One-side eating habit and intake of instant foods were negatively related with BQI in both male groups. In major and non-major female student group, exercise time, meal regularity, favorite food, amount of meal, intake of tofu were related with BQI positively and intake of tea and/or meats negatively. The result of this study revealed that desirable food habits, dietary behavior and health-related lifestyle may have a beneficial effect on bone density. They need practically and systematically organized nutrition education on optimum body weight, good eating habits, weight bearing exercise and intakes of good quality nutrient for higher bone density level.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.1
• /
• pp.75-87
• /
• 1996

Background: Lung cancer is the second most frequent malignancy in man in Korea. Surgery is the best treatment modality for non-small cell lung cancer, but most patients were presented in far advanced stage. So radiation therapy(RT) with or without chemotherapy is the next choice and radiation-induced pneumonitis and pulmonary fibrosis is the major limiting factor for the curative RT. Radiation pneumonitis is manifested with fever, cough and dyspnea, 2~3 months after the termination of radiotherpy. Chest X ray shows infiltration, typically limited to the radiation field, but occasionally bilateral infiltration was reported. Also Gibson et al reported that BAL lymphocytosis was found in both lungs, even though the radiation was confined to one lung. The aim of this study is to investigate the change of adhesion molecules expression on BAL cells and serum soluble ICAM-1(sICAM-1) level after the RT and its relationship to the development of radiation pneumonitis. The second aim is to confirm the bilaterality of change of BAL cell pattern and adhesion molecule expression. Subjects: BAL and the measurement of sICAM level in serum and BALF were done on 29 patients with lung cancer who received RT with curative intention. The BAL was done before the RT in 16 patients and 1~2 month after RT in 18 patients. 5 patients performed BAL before and after RT. Result: Clinically significant radiation pneumonitis developed in 7 patients. After RT, total cell count in BAL was significantly increased from $(20.2{\pm}10.2){\times}10^6\;cells/ml$ to $(35.3{\pm}21.6){\times}10^6\;cells/ml$ (p=0.0344) and %lymphocyte was also increased from $5.3{\pm}4.2%$ to $39.6{\pm}23.4%$ (p=0.0001) in all patient group. There was no difference between ipsilateral and contraleteral side to RT, and between the patients with and without radiation-pneumonitis. In whole patient group, the level of sICAM-1 showed no significant change after RT(in serum: $378{\pm}148$, $411{\pm}150\;ng/ml$, BALF: $20.2{\pm}12.2$, $45.1{\pm}34.8\;ng/ml$, respectively), but there was a significant difference between the patients with pneumonitis and without pneumonitis (serum: $505{\pm}164$ vs $345{\pm}102\;ng/ml$, p=0.0253, BALF: $67.9{\pm}36.3$ vs $25.2{\pm}17.9\;ng/ml$, p=0.0112). The expression of ICAM-1 on alveolar macrophages (AM) tends to increase after RT (RMFI: from $1.28{\pm}0.479$ to $1.63{\pm}0.539$, p=0.0605), but it was significantly high in patients with pneumonitis ($2.10{\pm}0.390$) compared to the patients without pneumonitis ($1.28{\pm}0.31$, p=0.0002). ICAM-1 expression on lymphocytes and CD 18 (${\beta}2$-integrin) expression tended to be high in the patients with pneumonitis but the difference was statiastically not significant. Conclusion: Subclinical alveolitis on the basis of BAL finding developed bilaterally in all patients after RT. But clinically significant pneumonitis occurred in much smaller fraction and the ICAM-1 expression on AM and the sICAM-1 level in serum were good indicator of it.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.1
• /
• pp.21-32
• /
• 2010

The convergence angle of a prepared tooth is a very important factor in the retention and resistance of a crown restoration. But various intraoral environments and clinician's techniques make it difficult to obtain the ideal inclination. Therefore, in this study, clinical convergence angle of a prepared tooth was investigated. The data was collected from the patient models of prosthodontic residents and the patient models of general practitioners. The images of mesiodistal and buccolingual surfaces were taken with a digital camera to evaluate the convergence angle on 'ImageJ' program. The images were classified according to the criteria (1. Clinician group, 2. Position in the dental arch, 3. The purpose of abutment preparation)and then analyzed. The mean convergence angle of a prepared tooth for Korean clinicians was $15.02^{\circ}$ (${\pm}10.13^{\circ}$). 1. It was significant in the convergence angle between the general practitioner group and the prosthodontic resident group(p<0.05). 2. It was significant between the mesiodistal and buccolingual surface in the the prosthodontic resident group(p<0.05). 3. For the general practitioner group, it was significant when anteriors and premolars were compared with molars(p<0.05). For the prosthodontic resident group, it was significant when anteriors and premolars were compared with molars (p<0.05). 4. When divided into upper and lower arches, for the general practitioner group, it showed significant difference in the buccolingual aspect(p<0.05). Also in the prosthodontic resident group, it showed significant difference in the buccolingual aspect(p<0.05). 5. Dividing left and right sides of the arches, there was no significant difference in the general practitioner group and the prosthodontic resident group(p>0.05). 6. In the general practitioner group, it was significant in the mesiodistal axial convergence angle of single crown abutment and 3 unit bridge abutment(p<0.05). In the prosthodontic resident group, it was significant in the mesiodistal and overall axial convergence angle of single crown abutment and 3 unit bridge abutment(p<0.05). Clinical convergence angle of prepared tooth in Korea was included in agreement with other studies investigating convergence angle that ranged from 10 to 22 degrees, achieved in clinical practice.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.3
• /
• pp.239-249
• /
• 2001

The purpose of this study is to evaluate the relationship of the factors which could be influenced by orthognathic surgery especillay SSRO. We measured the amounts of the maximum opening, lateral movements, maximum velocity and pattern of mandibular path during the opening and closing of mandible at the following times ; preoperative, 1 month after operation, 6 months after operation respectively using MKG. And the results were compared according to the categorized subgroups. Following results were obtained : 1. The change of the amounts of mandibular lateral movement and maximum opening velocity were statistically different between male and female (p<0.05), but the others were not. 2. According to the method of operation, there was no difference in the change of the mandibular movements between the group of SSRO and SSRO plus LeFort I osteotomy (p>0.05). 3. According to the amounts of mandibular movement, the recovery of left lateral movement of the group of $6{\sim}10mm$ was better than the other groups (p<0.05). 4. In the frontal pattern of the opening and closing of the mandible, the complex deflected type (F5), simple deflected type (F4), complex deviated type (F3), simple deviated type (F2), straight type (F1) were obtained in order at the time of preoperative, simple deflected type, simple deviated type, complex deviated type, straight type, complex deflected type in order at the time of 1 month after surgery, and the result at the time of 6 months after surgery was the same with that of the time of preoperative. In the sagittal pattern, non-coincident type (S2) was predominant at the time of preoperative, and coincident type (S1) was predominant at the time of 1 month after surgery. After 6 months, the result was also the same with that of the preoperative in sagittal pattern. 5. There was not a statistical difference in the change of the mandibular movement between group of presence of the preoperative TMJ symptoms and non-presence group (p>0.05). 6. There was not a statistical difference in the change of the mandibular movement between repositioning device applied group and non-applied group (p>0.05). 7. Sixty three percents of the patients who had preoperative TMJ symptoms were improved after surgery and preoperative TMJ symptoms were more improved after operation in the repositioning device non-applied group statistically (p<0.05).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.2
• /
• pp.123-133
• /
• 1992

This study was conducted to clarify progressed changes of plant types and the effects of the physiological and ecological components on improving ideotype of winter wheat. 12 wheat varieties were planted at the experimental farm of Wheat and Barley Research Institute in Suwon in 1990. As results of intensive wheat breeding for early maturity since 1959, heading, flowering and maturing dates have been shortened by 17, 15 and 14 dagys, respectively. The shortened days from sowing to heading and from heading to flowering contributed to the early maturity to improved. Physiological factors associated with heading time of wheat could be reprsented by growth habit, photoperiod responses, earliness in narrow sense and winter hardiness. For improving an early maturity of winter wheat, it would desired to maintain some degree of winter habit(III-IV), and recombination of more insensitivity to short day length and more shortened earliness in narrow sense than that of Saemil and Chugoku 81, and higher degree of winter hardiness. For improving the early maturity the more effective way must be of shortened days from sowing to heading, and days from flowering to maturity than days from heading to flowering. Ideotype of wheat will be desired to recombine two semi-dwarf genes with erect plant type being about 70-80cm, less stem elongation by late spring, long spike and many grains per spikelet. Average spike weight ratio was about 45-49% in high-yielding varieties, stem fresh weight was lighter, but spike fresh weight was heavier in new one while leaf fresh weight was similar to each other during the maturing periods. Average spike dry weight ratio was higher about 40～48%, and stem and leaf blade dry weights were lower in the newly bred varieties. Stem dry weight was heavier than spike or leaf dry weight in the old varieties of Yungkwang, Jangwang and Jinkwang. Leaf area index for the varieties showed normal distribution curve as the maximum point in booting stage. The maximum point of this curve come in early maturing wheat, and late in old one. The maximum points of LAI were 6.4～6.8 in the high-yielding varieties. Totals of LAI in each period investigated of old one were higher than those of newly bred being 24.6～28.8. Chlorophyll content of the high-yielding varieties of Chokwang, Geurumil and Saemil as higher than that of the old varieties Jangkwang, Jinkwang, Wonkwang and Sinkwang from regrowing period to April 21. after then slightly and even after heading. Net assimilation rate (NAR) was higher in high-yielding varieties with good plant type, and lower in old ones. Grain yield of the newly released varieties increased rapidly but slowly in the old ones. Change in water content of grain at the growing stage in newly bred was lower than that of the old bred. Diminishing rate of water content of grain in establishment per day was 1.2% average that of the old varieties including Yungkwang was 1.5%, and those of the newly bred including Chokwang were 0.9～1.1%. Chokwang, Naemil, and Saemil were the highest-yielding varieties of the Korean cultivars. Yields were increased by spikes per m$^2$, grain weight for the varieties bred in Suwon, and by spikes per m$^2$ for the varieties bred in Milyang.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.43-50
• /
• 2014

In case of all patients who receive radiation therapy, a treatment plan is established and all steps of treatment are planned in the same geometrical condition. In case of head and neck cancer patients who undergo simulated treatment through computed tomography (CT), patients are fixed onto a table for planning, but laid on the top of the treatment table in the radiation therapy room. This study excogitated and fabricated an adjustable holder for head and neck cancer patients to fix patient's position and geometrical discrepancies when performing radiation therapy on head and neck cancer patients, and compared the error before and after adjusting the position of patients due to difference in weight to evaluate the correlation between patients' weight and range of error. Computed tomography system(High Advantage, GE, USA) is used for phantom to maintain the supine position to acquire the images of the therapy site for IMRT. IMRT 4MV X-rays was used by applying the LINAC(21EX, Varian, U.S.A). Treatment planning system (Pinnacle, ver. 9.1h, Philips, Madison, USA) was used. The setup accuracy was compared with each measurement was repeated five times for each weight (0, 15, and 30Kg) and CBCT was performed 30 times to find the mean and standard deviation of errors before and after the adjustment of each weight. SPSS ver.19.0(SPSS Inc., Chicago, IL,USA) statistics program was used to perform the Wilcoxon Rank test for significance evaluation and the Spearman analysis was used as the tool to analyze the significance evaluation of the correlation of weight. As a result of measuring the error values from CBCT before and after adjusting the position due to the weight difference, X,Y,Z axis was $0.4{\pm}0.8mm$, $0.8{\pm}0.4mm$, 0 for 0Kg before the adjustment. In 15Kg CBCT before and after adjusting the position due to the weight difference, X,Y,Z axis was $0.2{\pm}0.8mm$, $1.2{\pm}0.4mm$, $2.0{\pm}0.4mm$. After adjusting position was X,Y,Z axis was $0.2{\pm}0.4mm$, $0.4{\pm}0.5mm$, $0.4{\pm}0.5mm$. In 30Kg CBCT before and after adjusting the position due to the weight difference, X,Y,Z axis was $0.8{\pm}0.4mm$, $2.4{\pm}0.5mm$, $4.4{\pm}0.8mm$. After adjusting position was X,Y,Z axis was $0.6{\pm}0.5mm$, $1.0{\pm}0mm$, $0.6{\pm}0.5mm$. When the holder for the head and neck cancer was used to adjust the ab.0ove error value, the error values from CBCT were $0.2{\pm}0.8mm$ for the X axis, $0.40{\pm}0.54mm$ for Y axis, and 0 for Z axis. As a result of statistically analyzing each value before and after the adjustment the value was significant with p<0.034 at the Z axis with 15Kg of weight and with p<0.038 and p<0.041 at the Y and Z axes respectively with 30Kg of weight. There was a significant difference with p<0.008 when the analysis was performed through Kruscal-Wallis in terms of the difference in the adjusted values of the three weight groups. As it could reduce the errors, patients' reproduction could be improved for more precise and accurate radiation therapy. Development of an adjustable device for head and neck cancer patients is significant because it improves the reproduction of existing equipment by reducing the errors in patients' position.

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.5
• /
• pp.624-632
• /
• 2000

Background : Home ventilation can decrease hospital-acquired infection, increase physical activity, improve nutritional status, enhance quality of life, and reduce medical costs. The number of patient using home ventilators has been increasing, particularly in Europe and United States. Although the number of patients with home ventilation has been increasing in Korea, the current status of these patients is not well known. This study was undertaken to obtain basic information upon these patients in addition to evaluating any problems related to patients' home care in our country. Methods : A register of 92 patients with home ventilators in Seoul and Kyunggi Province were obtained from commercial ventilator supply companies. The patients were contacted by phone and 29 of them accepted our visit. Information concerning education about home care before discharge, equipment cost, and problems related to home care were documented. The mode and preset variables of the home ventilator were checked; tidal volume (TV), peak airway pressure, and oxygen saturation were measured. Results : There were 26 males (90%) and their mean age was 48.0 (${\pm}20.1$) years. The underlying diseases were : 21 neuromuscular disorders, 2 spinal cord injuries, 6 chronic lung diseases. Among the caregivers, spouses (n=14) predominated. Education for home care before discharge was performed primarily by intensive care unit nurses and the education for ventilator management by commercial companies. Twenty-five of the 29 patients had tracheostomies. Volume targeted type (VTT ; n=20, 69%) was more frequently used than the pressure targeted type (PTT). Twenty-three of the 29 patients purchased a ventilator privately, which cost 7,450,000 (${\pm}$3,290,000) won for a PTT, and 14,280.000 (${\pm}$3,130,000) won for a VTT. Total cost for the equipment was 11,430,000 (${\pm}$634,000) won. The average cost required for home care per month was 1,120,000 (${\pm}$1,360, 000) won. Conclusion : The commonest underlying disease of the patients was neuromuscular disease. The VTT ventilator was primarily used with tracheostomy. Patients and their families considered the financial difficulties associated with purchasing and maintaining equipment for home care an urgent problem. Some patients were aided by a visiting nurse, however most patients were neglected and left without professional medical supervision.

• Journal of Intelligence and Information Systems
• /
• v.26 no.2
• /
• pp.131-145
• /
• 2020

In line with the trend of industrial innovation, IoT technology utilized in a variety of fields is emerging as a key element in creation of new business models and the provision of user-friendly services through the combination of big data. The accumulated data from devices with the Internet-of-Things (IoT) is being used in many ways to build a convenience-based smart system as it can provide customized intelligent systems through user environment and pattern analysis. Recently, it has been applied to innovation in the public domain and has been using it for smart city and smart transportation, such as solving traffic and crime problems using CCTV. In particular, it is necessary to comprehensively consider the easiness of securing real-time service data and the stability of security when planning underground services or establishing movement amount control information system to enhance citizens' or commuters' convenience in circumstances with the congestion of public transportation such as subways, urban railways, etc. However, previous studies that utilize image data have limitations in reducing the performance of object detection under private issue and abnormal conditions. The IoT device-based sensor data used in this study is free from private issue because it does not require identification for individuals, and can be effectively utilized to build intelligent public services for unspecified people. Especially, sensor data stored by the IoT device need not be identified to an individual, and can be effectively utilized for constructing intelligent public services for many and unspecified people as data free form private issue. We utilize the IoT-based infrared sensor devices for an intelligent pedestrian tracking system in metro service which many people use on a daily basis and temperature data measured by sensors are therein transmitted in real time. The experimental environment for collecting data detected in real time from sensors was established for the equally-spaced midpoints of 4×4 upper parts in the ceiling of subway entrances where the actual movement amount of passengers is high, and it measured the temperature change for objects entering and leaving the detection spots. The measured data have gone through a preprocessing in which the reference values for 16 different areas are set and the difference values between the temperatures in 16 distinct areas and their reference values per unit of time are calculated. This corresponds to the methodology that maximizes movement within the detection area. In addition, the size of the data was increased by 10 times in order to more sensitively reflect the difference in temperature by area. For example, if the temperature data collected from the sensor at a given time were 28.5℃, the data analysis was conducted by changing the value to 285. As above, the data collected from sensors have the characteristics of time series data and image data with 4×4 resolution. Reflecting the characteristics of the measured, preprocessed data, we finally propose a hybrid algorithm that combines CNN in superior performance for image classification and LSTM, especially suitable for analyzing time series data, as referred to CNN-LSTM (Convolutional Neural Network-Long Short Term Memory). In the study, the CNN-LSTM algorithm is used to predict the number of passing persons in one of 4×4 detection areas. We verified the validation of the proposed model by taking performance comparison with other artificial intelligence algorithms such as Multi-Layer Perceptron (MLP), Long Short Term Memory (LSTM) and RNN-LSTM (Recurrent Neural Network-Long Short Term Memory). As a result of the experiment, proposed CNN-LSTM hybrid model compared to MLP, LSTM and RNN-LSTM has the best predictive performance. By utilizing the proposed devices and models, it is expected various metro services will be provided with no illegal issue about the personal information such as real-time monitoring of public transport facilities and emergency situation response services on the basis of congestion. However, the data have been collected by selecting one side of the entrances as the subject of analysis, and the data collected for a short period of time have been applied to the prediction. There exists the limitation that the verification of application in other environments needs to be carried out. In the future, it is expected that more reliability will be provided for the proposed model if experimental data is sufficiently collected in various environments or if learning data is further configured by measuring data in other sensors.

• Journal of Intelligence and Information Systems
• /
• v.27 no.1
• /
• pp.1-21
• /
• 2021

As the global business environment changes, uncertainties in technology development and market needs increase, and competition among companies intensifies, interests and demands for R&D activities of individual companies are increasing. In order to cope with these environmental changes, R&D companies are strengthening R&D investment as one of the means to enhance the qualitative competitiveness of R&D while paying more attention to facility investment. As a result, facilities or R&D investment elements are inevitably a burden for R&D companies to bear future uncertainties. It is true that the management strategy of increasing investment in R&D as a means of enhancing R&D capability is highly uncertain in terms of corporate performance. In this study, the structural factors that influence the R&D capabilities of companies are explored in terms of technology management capabilities, R&D capabilities, and corporate classification attributes by utilizing data mining techniques, and the characteristics these individual factors present according to the level of R&D capabilities are analyzed. This study also showed cluster analysis and experimental results based on evidence data for all domestic R&D companies, and is expected to provide important implications for corporate management strategies to enhance R&D capabilities of individual companies. For each of the three viewpoints, detailed evaluation indexes were composed of 7, 2, and 4, respectively, to quantitatively measure individual levels in the corresponding area. In the case of technology management capability and R&D capability, the sub-item evaluation indexes that are being used by current domestic technology evaluation agencies were referenced, and the final detailed evaluation index was newly constructed in consideration of whether data could be obtained quantitatively. In the case of corporate classification attributes, the most basic corporate classification profile information is considered. In particular, in order to grasp the homogeneity of the R&D competency level, a comprehensive score for each company was given using detailed evaluation indicators of technology management capability and R&D capability, and the competency level was classified into five grades and compared with the cluster analysis results. In order to give the meaning according to the comparative evaluation between the analyzed cluster and the competency level grade, the clusters with high and low trends in R&D competency level were searched for each cluster. Afterwards, characteristics according to detailed evaluation indicators were analyzed in the cluster. Through this method of conducting research, two groups with high R&D competency and one with low level of R&D competency were analyzed, and the remaining two clusters were similar with almost high incidence. As a result, in this study, individual characteristics according to detailed evaluation indexes were analyzed for two clusters with high competency level and one cluster with low competency level. The implications of the results of this study are that the faster the replacement cycle of professional managers who can effectively respond to changes in technology and market demand, the more likely they will contribute to enhancing R&D capabilities. In the case of a private company, it is necessary to increase the intensity of input of R&D capabilities by enhancing the sense of belonging of R&D personnel to the company through conversion to a corporate company, and to provide the accuracy of responsibility and authority through the organization of the team unit. Since the number of technical commercialization achievements and technology certifications are occurring both in the case of contributing to capacity improvement and in case of not, it was confirmed that there is a limit in reviewing it as an important factor for enhancing R&D capacity from the perspective of management. Lastly, the experience of utility model filing was identified as a factor that has an important influence on R&D capability, and it was confirmed the need to provide motivation to encourage utility model filings in order to enhance R&D capability. As such, the results of this study are expected to provide important implications for corporate management strategies to enhance individual companies' R&D capabilities.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.25 no.2
• /
• pp.15-24
• /
• 2021

Purpose SPECT/CT was noted for its excellent correction method and qualitative functions based on fusion images in the early stages of dissemination, and interest in and utilization of quantitative functions has been increasing with the recent introduction of companion diagnostic therapy(Theranostics). Unlike PET/CT, various conditions like the type of collimator and detector rotation are a challenging factor for image acquisition and reconstruction methods at absolute quantification of SPECT/CT. Therefore, in this study, We want to find out the effect on the radioactivity concentration estimate by the increase or decrease of the total acquisition time according to the number of projections and the acquisition time per projection among SPECT/CT imaging conditions. Materials and Methods After filling the 9,293 ml cylindrical phantom with sterile water and diluting 99mTc 91.76 MBq, the standard image was taken with a total acquisition time of 600 sec (10 sec/frame × 120 frames, matrix size 128 × 128) and also volume sensitivity and the calibration factor was verified. Based on the standard image, the comparative images were obtained by increasing or decreasing the total acquisition time. namely 60 (-90%), 150 (-75%), 300 (-50%), 450 (-25%), 900 (+50%), and 1200 (+100%) sec. For each image detail, the acquisition time(sec/frame) per projection was set to 1.0, 2.5, 5.0, 7.5, 15.0 and 20.0 sec (fixed number of projections: 120 frame) and the number of projection images was set to 12, 30, 60, 90, 180 and 240 frames(fixed time per projection:10 sec). Based on the coefficients measured through the volume of interest in each acquired image, the percentage of variation about the contrast to noise ratio (CNR) was determined as a qualitative assessment, and the quantitative assessment was conducted through the percentage of variation of the radioactivity concentration estimate. At this time, the relationship between the radioactivity concentration estimate (cps/ml) and the actual radioactivity concentration (Bq/ml) was compared and analyzed using the recovery coefficient (RC_Recovery Coefficients) as an indicator. Results The results [CNR, radioactivity Concentration, RC] by the change in the number of projections for each increase or decrease rate (-90%, -75%, -50%, -25%, +50%, +100%) of total acquisition time are as follows. [-89.5%, +3.90%, 1.04] at -90%, [-77.9%, +2.71%, 1.03] at -75%, [-55.6%, +1.85%, 1.02] at -50%, [-33.6%, +1.37%, 1.01] at -25%, [-33.7%, +0.71%, 1.01] at +50%, [+93.2%, +0.32%, 1.00] at +100%. and also The results [CNR, radioactivity Concentration, RC] by the acquisition time change for each increase or decrease rate (-90%, -75%, -50%, -25%, +50%, +100%) of total acquisition time are as follows. [-89.3%, -3.55%, 0.96] at - 90%, [-73.4%, -0.17%, 1.00] at -75%, [-49.6%, -0.34%, 1.00] at -50%, [-24.9%, 0.03%, 1.00] at -25%, [+49.3%, -0.04%, 1.00] at +50%, [+99.0%, +0.11%, 1.00] at +100%. Conclusion In SPECT/CT, the total coefficient obtained according to the increase or decrease of the total acquisition time and the resulting image quality (CNR) showed a pattern that changed proportionally. On the other hand, quantitative evaluations through absolute quantification showed a change of less than 5% (-3.55 to +3.90%) under all experimental conditions, maintaining quantitative accuracy (RC 0.96 to 1.04). Considering the reduction of the total acquisition time rather than the increasing of the image acquiring time, The reduction in total acquisition time is applicable to quantitative analysis without significant loss and is judged to be clinically effective. This study shows that when increasing or decreasing of total acquisition time, changes in acquisition time per projection have fewer fluctuations that occur in qualitative and quantitative condition changes than the change in the number of projections under the same scanning time conditions.