• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.1308-1310
• /
• 2011

실내용 IR-UWB 레이더를 기반한 침입 탐지, 추적 시스템을 지원하기 위한 미들웨어 설계를 제안한다. 이 미들웨어의 설계는 다수의 측정 구역으로부터 받은 연속적인 데이터의 관리에 초점이 있다. 효율적인 데이터 관리를 위해 레이더 소프트웨어 플랫폼을 기능적으로 구분하여 설계하고 연동하였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.6-7
• /
• 2020

The unit-water content of concrete is one of the important factors in determining the quality of concrete and is directly related to the durability of the construction structure, and the current method of measuring the unit-water content of concrete is applied by the Air Meta Act and the Electrostatic Capacity Act. However, there are complex and time-consuming problems with measurement methods. Therefore, high frequency moisture sensor was used for quick and high measurement, and unit-water content of mortar was evaluated through machine running and deep running based on measurement big data.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.189-192
• /
• 2020

본 논문은 요양원·요양병원에 입원한 노인들을 위한 실행능력중심 기능성 스마트 게임기기 및 데이터를 관리할 수 있는 시스템을 개발하고자 한다. 시스템은 증강현실 기반의 스마트맵, 동작 감응형 스마트 스틱, 스마트 명령과 연동하는 로봇, 이러한 게임 콘텐츠로 동작되는 모든 기기에서 나오는 데이터를 수집·관리·분석하는 정보 측정 및 분석 시스템으로 동작되는 시스템을 설계하였다. 이 시스템을 통해 한국이나 일본의 노인병원에서 간절히 필요로 하는 요양보호사 없이 노인들끼리 셀프 진행 가능하고 재미있는 기능성 콘텐츠의 수요를 만족시켜 줄 수 있을 것이다. 또한 치매와 같이 완벽한 치료가 불가능한 질병에도 증상악화를 늦추는 효과가 있으리라 예상한다. 향후 시스템을 개발하여 직접 실험을 하면서 다양한 데이터 수집을 통해 빅데이터로 활용하여 보다 전문적이고 효율적인 재활을 진행할 것이다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.893-895
• /
• 2022

기술의 무궁한 발전을 이루고 있는 현대사회에서도 전기 산업 현장에서는 크고 작은 사고가 빈번하게 발생하고 있다. 그에 따라 해당 장비는 안정성, 자율성, 내구성을 겸비하고, 무선 통신 시스템을 갖추어 위험 요소와 작업자 간 사이를 이격시켜 안전한 작업 환경을 구축 및 제공한다. 원격 제어 외에도 장비 자체의 결함 감지, 악력 측정, 실시간 영상 제공, 작업 데이터 저장 기능 등 다양한 서비스를 추가하여 제품의 완성도 및 실용성을 증가, 사용자의 작업 편의를 보장한다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.123-124
• /
• 2023

This study successfully developed a chromium-free paper-based analytical device (µPAD) for chloride detection in fresh concrete. The sensing materials were chemically synthesized and coated to the paper through drop casting. The fabricated µPAD was thoroughly tested with various concentrations of chloride ions. Upon interaction with the µPAD, the chloride ions in the solution react with a chromium-free silver compound, exhibiting a specific coloring height proportional to the absolute chloride concentration. The height of the color change during a reaction can vary based on the chloride concentration, which allows for predicting the chloride concentration in a solution. The results reveal that µPAD has extraordinary precision in identifying chloride in fresh concrete, which highlights its immense potential for future applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2480-2487
• /
• 2011

As sensor technology grows up in fields such as environmental hazards detecting system, ubiquitous sensor network, intelligent robot, the sensing and detecting system for sensor is increasing. The sensor data is measured by change of chemical and physical status. Because of decrepit sensor or various sensing environment, it is problem that sensor data is inaccurate result. So the reliability of sensor data is essential. In this paper, we proposes a reliable sensor signal processing platform for various sensor. To improve reliability, we use same sensors in multiple array structure. As sensor data is corrected by spatial and temporal relation signal processing algorithm for measured sensor data, reliability of sensor data can be improved. The exclusive protocol between platform components is designed in order to verify sensor data and sensor state in various environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.872-878
• /
• 2012

In this paper, an arm motion sensing system using potentiometer is developed. Most motion sensing systems use optical method for the quality of motion data. The optical method needs much cost for manufacturing capture system and takes much time for correcting the captured data. And mechanical method entails relativity low cost, but it uses the wires and takes much time for correcting the data like the optical method. For solving the problems, in this paper, an arm motion sensing system is newly developed using low cost potentiometer and based on the suggested simple calculation method for the joint angles and the angular velocities. For the verification of the performance of the developed system, practical experiments were executed using real human arm motion and a robot arm. The experimental results showed that the motion of the robot arm controlled by the output of the developed motion sensing system is much similar with the motion of human arm.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.5
• /
• pp.488-497
• /
• 1984

In the assembling process by industrial robots, many difficulties stem from the fact that the assembly operation is impossible or the parts to be assembled can be damaged by reaction forces due to even little misalignment in part mating. In this paper a flexible and sensible robot wrist is developed to make possible the precision insertion operation. The flexibility of the developed wrist were evaluated both analytically and experimentally in actual insertion process. The results show that without the use of feedback control the wrist is capable of doing insertion operations with a small clearance at a low inserting force. For smaller clearance the assembly process was devised involving insertion force feedback and a control algorithm for this active accommodation was developed. The simulation results show that if the active feedback control is used the insertion action can be performed with much less force, as compared with a passive accommodation method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.1
• /
• pp.120-130
• /
• 1994

The leadwire cutting machine that has been used recently cuts leadwires by putting one-side force with the same priciple as a saw, and applies a stress at soldered part of PCB. Because the stress becomes one cause of contact-defect, a leadwire cutting robot that cuts leadwire-site with nipper and does not apply stress is considered, In this paper a technique of detecting leadwire-site is studied for the purpose of using on automatic leadwire cutting robots. A technique deriving 2-dimensional site-information with many I-dimensional binary data of perspective front-view of PCB taken from various direction was proposed. Simulation and experiments were done under the same condition each other and a small universal PCB was choosen as an experimental object. As a result of simulations and experiments, the proposed technique turns out to be very useful for automatic leadwire cutting robots.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.12
• /
• pp.1130-1135
• /
• 2015

The bond pull test is the most widely used technique for the evaluation and control of wire bond quality. The wire being tested is pulled upward until the wire or bond to the die or substrate breaks. The inspector test strength of wire by manually and it takes around 3 minutes to perform the test. In this paper, we develop a 3D vision system to measure 3D position of wire. It gives 3D position data of wire to move a hook into wires. The 3D measurement method to use here is a confocal imaging system. The conventional confocal imaging system is a spot scanning method which has a high resolution and good illumination efficiency. However, a conventional confocal systems has a disadvantage to perform XY axis scanning in order to achieve 3D data in given FOV (Field of View) through spot scanning. We propose a method to improve a parallel mode confocal system using a micro-lens and pin-hole array to remove XY scan. 2D imaging system can detect 2D location of wire and it can reduce time to measure 3D position of wire. In the experimental results, the proposed system can measure 3D position of wire with reasonable accuracy.