• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.747-754
• /
• 2013

This paper proposed a new transponder detection method to reduce tag recognition time and simplify anti-collision process in RFID systems. In conventional systems, a transponder in detectable area is passively recognized by responding to a reader command. In addition, if there are multiple tags in the area, a collision between tags occurs by responding at the same time to a command and anti-collision process begins. In the proposed method, tags are actively recognized without any command from a reader which results to reducing a tag recognition time and simplifying anti-collision process. To compare transponder recognition time, the process of transponder recognition in conventional systems is analysed. A circuit to detect transponder directly is developed and antenna voltage variation of a reader in the appearance of multiple transponders is analysed for the implementation of the proposed method.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1023-1030
• /
• 2021

Korea Maritime Safety Tribunal (KMST) statistics released in of 2019 indicated that most collision accidents involving small-size vessels with less than 20 gross-tonnage occur mainly due to operational carelessness, such as forward-looking negligence and unskilled vessel control. As an effective remedy, training and education for vessel operators are being strengthened to prevent accidents. However, collision accidents are increasing, and technical measures are continuously developed to reduce accidents caused by human factors. In this study, an avoidance algorithm and prototype of terminal-controller against collision between two nearby vessels was developed for implementation on relative navigation control by adopting WAVE telecommunication technology. Moreover, several sea trial tests were performed to verify the collision avoidance algorithm and control system using two fishing vessels for dif erent scenarios.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.11a
• /
• pp.278-280
• /
• 2000

본 논문에서는 경로계획 알고리즘으로 사용한 거리변환 경로곡선상에 중간경유점을 설정한후 이를 최적화시켜 각 이동로봇의 주행경로를 최적화 하였고, 로봇간의 우선 순위를 설정하여 원활한 충돌회피가 이루어지도록 하였으며, 각 로봇은 충돌회피 후에도 중간 경유점 까지 최단거리로의 주행이 이루어지도록 하였다. 또한 기존에 제시된 방법에 외길 입구에 경고 지점을 지정함으로써 외길에서의 상호충돌을 방지하는 효과를 주었다. 이로써 로봇간의 우선 순위의 설정으로 인하여 생기는 시간 지연을 해소시키는 효과를 가져올 수 있었다. 로봇간의 우선순위를 설정함에 있어서 또다른 변수를 추가시킴으로 로봇이외의 움직이는 장애물에 대해서도 고려하도록 하였다. 위와 같이, 본 논문에서는 여러대의 이동로봇을 고정된, 움직이는 장애물이 있는 환경하에서 장애물 회피시마다 최단경로로 주행하여 주어진 목표점까지 이동시키는 경로계획에 관하여 연구하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1495-1502
• /
• 1991

본 연구에서는 동일 작업 공간내에서 두대의 로봇이 각각의 토크의 제한 조건 과 충돌 회피 조건을 만족하면서 근사 최소 시간에 지정된 경로를 주행하기 위한 궤적 계획법을 제안하고자 한다. 이때, 동작 우선도에 의하여 한 대의 로봇은 주 로봇, 다른 한 대의 로봇은 종 로봇으로 지정되는데 주 로봇은 입력 토크의 제한조건을 만족 하며 주어진 경로를 최소 시간에 움직이도록 궤적 계획을 하였으며, 종 로봇은 주 로 봇과의 충돌을 피하고 입력 토크의 제한 조건을 만족하며 주어진 경로를 근사 최소 시 간에 움직이도록 하였다.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.427-433
• /
• 2022

Obstacle detection, collision recognition, and avoidance technologies are required the collision avoidance technology for UAVs. In this paper, considering collinear multiple static obstacle, we propose an obstacle detection algorithm using LiDAR and a collision recognition and avoidance algorithm based on CPA. Preprocessing is performed to remove the ground from the LiDAR measurement data before obstacle detection. And we detect and classify obstacles in the preprocessed data using the K-means clustering algorithm. Also, we estimate the absolute positions of detected obstacles using relative navigation and correct the estimated positions using a low-pass filter. For collision avoidance with the detected multiple static obstacle, we use a collision recognition and avoidance algorithm based on CPA. Information of obstacles to be avoided is updated using distance between each obstacle, and collision recognition and avoidance are performed through the updated obstacles information. Finally, through obstacle location estimation, collision recognition, and collision avoidance result analysis in the Gazebo simulation environment, we verified that collision avoidance is performed successfully.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1389-1390
• /
• 2015

본 논문에서는 선도-추종자 로봇의 대형을 유동적으로 변형하며 장애물을 효과적으로 회피하는 방법을 제안한다. 로봇이 장애물을 회피함에 있어서 고정된 대형으로 이동하는데 어려운 문제가 발생한다. 본 논문에서는 이러한 문제점을 해결하기위해 장애물 회피시 선도로봇의 방향각과 위치, 선도로봇과 추종자 로봇의 거리를 이용하여 대형을 유동적으로 변형하여 장애물과의 충돌을 회피하는 방법을 사용하고 로봇의 경로계획을 위하여 포텐셜 필드 알고리즘을 사용하였다. 본 논문에서는 Matlab을 이용한 모의실험을 통하여 제안된 방법의 성능을 확인하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.798-807
• /
• 2021

In the era of the fourth industrial revolution, Maritime Autonomous Surface Ship(MASS) are expected to emerge in the shipping industry. There has been much active research on collision avoidance systems regarding MASSs, but most of it has focused on merchant ships. A study of collision avoidance systems in fishing vessels is also essential, because Maritime Autonomous Surface Ships will encounter all type of vessels. In this study, the minimum passage distance between small-medium-sized fishing vessels and other vessels was investigated for the Ship's domain analysis. Based on the AIS data of Busan port and the adjacent area, the separation distances of fishing vessels were analyzed. The results indicated that as the speed of fishing vessels increased, the distance increased from 4L to 8L, and as length of the fishing vessels increased, the distance decreased from 10L to 6L. It is believed that the results of this study can be applied in the future to collision avoidance models for MASSs that reflect the domain of fishing vessels.

• Journal of Advanced Navigation Technology
• /
• v.23 no.1
• /
• pp.1-7
• /
• 2019

Thisstudy presentsthe development of a fast-time airport surface simulator. The simulator usesthe output from a first-come first-served (FCFS) scheduler and has adopted one-dimensional dynamic model to simulate the movement of the aircraft on the surface. Higher collision risks situations in the airport surface traffic are analyzed to classify those situations into six cases. A conflict detection and resolution algorithm is implemented to maintain separation distance and to prevent deadlock. The simulator was tested with a scenario at the Incheon International Airport that contains 72 aircraft. Without the conflict detection and resolution, various conflict situations are identified. When the conflict detection and resolution algorithm is managing the traffic, it is confirmed that the conflicts are removed at the price of additional delays. In the conflict resolution algorithm, three prioritization strategies are implemented, and delayed aircraft count and average additional delays are compared. Prioritization based on remaining time or distance showed smaller total additional delay compared to choosing minimum delay priority for each situation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.6
• /
• pp.634-639
• /
• 2014

This paper specifies a collision alarm using an infrared distance sensor that can identify the dangerousness of collision of active mobile robotic systems to various objects, such as unknown objects or another robots. And we analyse the major operating signals and features of the collision alarm for effective industrial applications. For the purpose, we consider a typical parking situation of a mobile robotic system with the collision alarm designed. As a result, it is shown that the proposed collision alarm is applicable for effective collision avoidance and safe driving of various mobile robots or vehicles.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.716-718
• /
• 2016

본 연구는 차량이 정차해 있거나 차량을 후진하여 이동시키고자 할 때 운전자의 시야에 보이지 않는 차량의 후방 좌 우측에서 접근하는 차량 또는 보행자와 같은 움직임을 가지는 물체와 충돌을 회피하기 위한 방법에 관한 연구이다. 해당 물체와 충돌을 피하기 위해서는 후방의 영상을 획득하여 움직임을 가진 물체를 식별하고 차량과의 거리, 속도 및 충돌 가능성을 계산할 수 있어야 한다.