• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.35-41
• /
• 2016

GNSS/Geoid positioning technology allows orthometric height determination using both the geoidal height calculated from geoid model and the ellipsoidal height achieved by GNSS survey. In this study, Network-RTK surveying was performed through the Benchmarks in the study area to analyze the possibility of height positioning of the Network-RTK. And the orthometric heights were calculated by applying the Korean national geoid model KNGeoid13 according to the condition of with site calibration and without site calibration and the results were compared. Simplex algorithm was adopted for liner programming in this study and the heights of all Benchmarks were calculated in both case of applying site calibration and does not applying site calibration. The results were compared to Benchmark official height of the National Geographic Information Institute. The results showed that the average value of the height difference was 0.060m, and the standard deviation was 0.072m in Network-RTK without site calibration and the average value of the height difference was 0.040m, and the standard deviation was 0.047m in Network-RTK with the application of the site calibration. With linearization method to obtain the optimal solution for observations it showed that the height determination within 0.033m was available in GNSS Network-RTK positioning.

• The Korean Journal of Mycology
• /
• v.39 no.1
• /
• pp.44-47
• /
• 2011

A harmful fungus occurred seriously in bed-log of shiitake(Lentinula edodes) in Jangheung-Gun, Korea. The fungus was identified as Bjerkandera adusta by its morphology and ITS(Internal Transcribed Spacer) analysis. The fungus was reported as causal agent of stem-rot of Populus euramericana in Korea, but not reported in bed-log of shiitake until this notification. Thus, studies were made to investigate inside condition of bed-log of shiitake damaged by B. adusta, physiological characteristics of B. adusta and antagonism between these two fungi. First of all, B. adusta is white-rotting fungus like shiitake and wood-rotting condition is similar to that of shiitake. But, there are a lot of small spots in damaged wood tissue under bark which are not seen in case of shiitake. Optimal temperature for mycelial growth of B. adusta is ca. $30^{\circ}C$ while that of shiitake is ca. $25^{\circ}C$. When confrontation cultures were made between these two fungi under $15^{\circ}C$, $20^{\circ}C$, $25^{\circ}C$ and $30^{\circ}C$, B. adusta has antagonistic ability against shiitake in all the temperatures. From the results of experiments, if the bed-logs of shiitake are exposed to high temperature, there should be mass propagation of B. adusta, and shiitake mycelia will be seriously injured by the fungus. Therefore, to prevent the damage by B. adusta, it is needed to grow the mycelia of shiitake fast in the bed-log, and to avoid exposure of the bed-log to high temperature in summer.

• Journal of Mushroom
• /
• v.14 no.4
• /
• pp.184-190
• /
• 2016

This study was performed to determine the optimal condition for Lentinula edodes JMI-10079 mycelium cultivation on the root of Polygonum multiflorum. We also analyzed the proximate composition, total amino acids, and minerals in the root of P. multiflorum cultivated with L. edodes JMI-10079 mycelia. The optimal temperature and pH for L. edodes JMI-10079 mycelium cultivation on the P. multiflorum root were $25^{\circ}C$ and pH 5-6 respectively, whereas the optimal carbon and nitrogen sources were glucose and maltose, respectively. The content of crude protein, crude fat, and ash in the P. multiflorum root cultivated with L. edodes JMI-10079 mycelia was higher than that in the uncultivated P. multiflorum root. The content of crude fiber was the highest in the control. Total amino acid analysis revealed that the contents of total amino acids and total essential amino acids were increased by higher root of P. multiflorum concentration.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.441-448
• /
• 2011

Lately, digital restitution was became common using digital aerial photos. Therefore, we can obtain three-dimensional data. As a plotting-maker is checked by naked eye, plotting original data is very useful for making reliable three-dimensional data including contour and elevation point layers. In this study, we want to make precise and accurate digital elevation model using plotting original data. Contour and elevation point layers was extracted in digital map and break line was extracted in plotting original data. And then, compared both of results. For comparison, we selected slight slope and complex topography area like a residence area, mountain and agricultural land. We extracted break line deleting layer until obtaining ideal digital elevation model. As the results, We could extract contour, elevation points, eight road and two boundary layers using break lines. And We could obtain precise elevation model. Editing break lines, the distortion of digital elevation model could be minimized in the complex and sharp slope area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.163-171
• /
• 1992

The narrow interal grid is effective in accuracy, but it is not able to make a densely grided sample, so that smoothing is requared. In digital elevation models, an application of the finite elements method is effective to smooth the undesired noise which is generated in aquisition of elevation data. And this is one of the simple and direct method to solve the problem for discontinuity of terrain. Therefore, the finite elements method is applied to study. In digital elevation model by appling the finite element, smoothing is affected by the height weight. In this study, the relation equation between elevation weight and standard deviation of smoothing was obstained as Y = 1900625 $X^4-312987.6$ $X^3+20330.72$ $X^2-578.6029$ X+12.63772 and from this function, Optimum elevation weight is 0.05.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.4
• /
• pp.367-376
• /
• 2006

This study determines the optimum polynomial of exterior orientation parameters(EOPs) as a function of line number of linear array scanner. To estimate priori EOPs, meta data of IKONOS scene and ground control points are used. We select a first order polynomial and a constant for position elements modeling and rotation elements modeling. Positioning accuracy of the determined EOPs is compared with that of RPCs bias-corrected by the least squares adjustment. There is almost no difference between accuracies of the two methods. To obtain digital elevation model(DEM), matching line is established by the EOPs. The DEM is compared with DEM generated by ERDAS IMAGINE software, which utilizes the bias-corrected RPCs. Height differences of DEMs by the two methods are ranged within a allowable standard deviation. The produced DEM, therefore, shows accuracy similar to the verified method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.1
• /
• pp.123-130
• /
• 2006

The purpose of the paper is to make the three dimensional road simulation model based on the digital photogrammetry and GIS techniques in the middle of Halla mountain of Jeju island. To do this, we generate DEM (digital elevation model) and digital ortho image using GIS tools such as Arc View, Imagestation and MGE module. In GIS, the overlay map schemes combining of the hill shade, the land slope and aspect were applied. Based on the processes, we can build the best three dimensional road line along the hill side of the island. From the results, we also found that the derived DEM from digital ortho image and the GIS technique were very useful for choosing the best three dimensional road design before the real road construction works in Jeju island.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.306-306
• /
• 2015

기존 토사유출실험 연구는 대체로 유출구에서 유사의 총량을 일정한 시간 간격으로 측정했다. 이 같은 방식으로는 총 토사유출량의 시간적 변화는 알 수 있으나, 토사유출의 공간적 분포 변화는 알 수 없기 때문에 토사유출의 취약지점을 파악하고 이를 제시할 수 없다. 본 연구에서는 이러한 한계를 극복하고자 입체사진측량 기법을 도입하여 토사유출의 공간분포를 측정하고 각 지점이 총 토사유출량에 기여하는 정도를 파악하였다. 토조($2m{\times}1m{\times}0.3m$)로부터 약 1.5 m 높이에서 고해상도 디지털 카메라를 이용하여 토조 내 표면을 촬영하였고, 입체사진측량 기법을 이용해 토조 내 수치표고모형(Digital Elevation Models)을 추출하였다. 수치표고모형 추출 과정에서는 고도값의 오차 범위를 확인하였고 격자 해상도를 다양하게 설정하면서 최적의 격자 해상도를 평가해보았다. 최종적으로 구한 일련의 수치표고모형으로부터 토사유출의 시공간적 변화를 파악할 수 있었으며, 이는 토조 내 토사유출 과정에 대한 보다 세밀한 이해를 가져올 것으로 기대된다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.2
• /
• pp.24-36
• /
• 2000

This study deals with the optimal method of orthophoto products using the non-photogrammetric scanners. we scanned positive film of aerial photographs at the different resolution and producted the orthophoto using the automatically generated DEM based on the Digital Photogrammetric Workstation, considering aerial image resolutions, DEM interval, resampling method and outpixel size. As a results, the acquired accuracy was worse in horizontal, but good in vertical. So It will be expected that orthophoto using non-photo grammetric scanner is good enough for the acquisition of GIS data and the calculation of soil volumes.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.2
• /
• pp.209-218
• /
• 1994

This study aims to generate triangulated irregular network in a form of digital terrain model which is being increasingly used. In general, grid digital elevation model and triangulated irregular network are reasonable units for solving terrain problems. But, triangulated irregular network is an efficient alternative to grid digital elevation model because of their efficiency in storing data and their convenient data structure for accommodating irregularly spaced elevation data. Various methods represented for extracting triangulated irregular networks from grid digital elevation model, and then algorithm that get accurate results for triangulation with their data set was introduced. The new approach for triangulation in this study uses the Elevation and Changeable Distance criterion, and adding interpolation points and restricted constraint lines can generate triangulated irregular network which is more close to real surface. This made database efficient construction and could be used for many applications of geo-spatial information system.