• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.246-247
• /
• 2014

케이블 방송망에서 최대 10Gbps 테이터 전송을 위해 최근 북미에서 표준화된 DOCSIS 3.1(Data over Cable Service Interface Specifications Version 3.1)에서는 고차 혼합 변조(Mixed Modulation) 방식을 제시하였다. DOCSIS 3.1 은 하향 데이터 전송을 위해 최대 192MHz 의 대역에서 4K 또는 8K 다중 직교 반송파를 사용한다. 특히 채널 오류 정정을 위한 채널 부호화 방법으로 유럽의 차세대 케이블 방송 표준인 DVB-C2(Digital Video Broadcasting - Cable Version 2)에 정의된 BCH(Bose, Chaudhuri, and Hocquenghem)와 LDPC(Low Density Parity Check) 연접부호를 사용한다. 단, DOCSIS 3.1 에서는 DVB-C2 와 달리 부호율 8/9 의 Short Mode 부호만을 사용하며 최대 16384-QAM 까지 사용한다. 하나의 부호율을 사용하기 때문에 QAM 차수에 따른 요구 SNR 의 차가 크게 된다. 주어진 채널 상황에서 최적의 전송용량을 얻기 위해 QAM 차수에 따른 요구 SNR 의 차를 줄일 수 있는 방법으로 혼합 변조가 도입되었으며, 본 논문에서는 혼합 변조에 따른 수신 성능을 제시한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1502-1507
• /
• 2005

The SA filters have a very flexible structure by limiting the maximum subwindow size. This flexible structure presents an effective trade-off between the complexity and performance of the filters. In this paper, experimental results showing the performance variation according to the change of filter order and subfilter type(such as max, min, exclusive-OR, mod) are presented. We designed optimal SA filters minimizing MSE for the various noise conditions. These results show several new properties of SA filters.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.5
• /
• pp.83-91
• /
• 1997

A reactor vibration monitoring has been performed using neutron noise obtained from excore detectors for the safety operation, Traditionally, the spectral estimator based on Fourier analysis has been widely used in the noise analysis of the reactor system. If the bias is too severe, the resolution would not be adequate for a given application. One major motivation for the current interests in the parametric approach to spectral estimation is the apparent higher resolution achievable with these modern techniques. In considering an unbias, a consistency, an efficency, and a minimum lower bound of the statictic estimation, an AR model is appropriate for noise spectral estimation with sharp peaks but not deep valley. In order to select an appropriate model order, the lag value of autocorrleaton function is applied. Burg method to trace the vibration mode of RPV internal is the most sucuessful.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2353-2363
• /
• 1994

This paper is concerned with the design of a robust digital controller using reduced-order observer on a robotic manipulator under the disturbance. In most cases of robotic manipulator since all state vectors are not measurable, the unmeasurable state vectors must be estimated or reconstructed. Other problems are caused by the nonlinear element like as nondifferentiable Coulomb friction, disturbance due to the gravitational pull, and the torsional spring effect of a link between the drive motor and the manipulator arm. The controller is based on feeding back the observable variables and the estimated state variables which are generated by the observer, and augmenting the system by additional discrete integrators. The feedback gain parameters are obtained by first applying the optimal control theory and then readjusting the feedback parameters to eliminate the limit cycle by using describing Function for nonlinear hybrid system.

• Korean Journal of Optics and Photonics
• /
• v.14 no.6
• /
• pp.643-648
• /
• 2003

The phase-shifting diffraction-grating interferometer proposed in the investigation uses a diffraction grating that performs manifold functions of beam splitting, beam recombination, and phase shifting. The reference and measurement waves generated by means of diffraction have different amplitudes depending on their orders of diffraction, so the interference fringe pattern resulting from the two waves tends to yield poor visibility. To cope with this problem, we select a phase grating of reflection type and attempt to improve the interference visibility with optimization of the groove shape of the grating through electromagnetic analysis.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.2
• /
• pp.73-79
• /
• 2011

Based on the results of Part 1 of our two-parts paper, the possibility on field applicability of CMDS(Coal Mine Drainage Sludge) mixed with bentonite and cement as a liner in landfill sites was investigated. The optimum moisture content that met the landfill liner condition was obtained when the ratio of CMDS: bentonite: cement was 1: 0.5: 0.3 in a lab-scale. The relative compaction was measured in 90.1%, which results for construction field have been generally acceptable. In this study, a large-scale Lysimeter($1.0m{\times}1.5m{\times}2.0m$) was used to simulate the effects of the layer on the freeze/thaw by -20 average temperature. The mixture after freezing/thawing showed compressive strength more than $5kg/cm^2$, which was satisfied with EPA standards. Initial permeability of CMDS was $7.10{\times}10^{-7}cm/s$ and permeability its mixture after freezing/thawing was increased to $9.80{\times}10^{-7}cm/s$. The change of temperature in the layers rises and falls with linear and temperature gradient keep maintain the present state. Moisture contents in the layers have not been radically changed. Through the leaching test determined by KSLT method, it was found that heavy metals excluding Zn and Ni were not leached out or leached out less than the standards during 7 cycles of freezing/thawing process. Since it shows the increased permeability about 1.5 times and slight change in moisture content, but it was satisfied with EPA standar through 7 cycles of freezing/thawing process, this mixture can be applied as a liner in landfill final cover system.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.131-134
• /
• 2009

Krylov 부공간 모델차수축소법은 초기 유한요소모델과 축소모델의 전달함수의 계수인 모멘트를 일치시키는 방법을 이용하는 축소기법으로 이미 대형 유한요소모델의 주파수응답 해석의 효율적인 계산에 많이 사용되고 있는 방법 중의 하나이다. 본 논문에서는 Krylov 부공간 축소기법을 이용한 관심 주파수영역에 대한 주파수응답 해석 및 이를 통하여 계산된 주파수응답의 여러 가지 설계변수에 대한 설계민감도 해석방법을 제안하였다. 일반적으로 구조물의 주파수응답을 고려한 최적설계를 위해서는 설계변수에 대한 관심 주파수영역에서의 주파수응답 및 그의 민감도 정보가 요구되므로, 고려하는 유한요소모델이 대형일 경우에 관심 주파수영역에서의 반복적인 해석으로 인한 계산비용의 문제가 대두된다. 본 논문에서는 축소모델을 이용하여 주파수응답과 주파수응답의 설계민감도 해석을 수행하여 계산의 효율성을 극대화하였다. 민감도 계산에는 시간측면과 구현의 용이성 측면에서 장점이 있는 준해석적 방법을 이용하였다. 수치 예제를 통하여 축소기법을 이용한 주파수응답의 설계민감도 해석 결과를 유한차분법에 근거한 민감도 결과와 비교하였다. 본 논문에서 제안된 방법을 이용하는 경우, 주파수응답을 고려한 최적설계를 계산비용 측면에서 매우 효율적으로 수행할 수 있을 것이다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.635-638
• /
• 2005

The curve shape of the time fluctuation extracted from the electromagnetic signals is very complex. Thus it is important to decide exactly the signal property such as the inflection point for the observed signal. Usually filters elaborately designed are used to detect the signal characteristics. When the noise is added to the signal, the inflection point can be detected using the observation filter. In this paper we propose the design method for a natural observation filter with optimal filter order to extract a definite inflection point for the case of signals with the mixed noise.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.491-499
• /
• 2007

In this paper, we present a design method of the ternary logic circuits based on Reed-Muller expansions. The design method of the presented ternary logic circuits checks the degree of each variable for the coefficients of Reed-Holler Expansions(RME) and determines the order of optimal control input variables that minimize the number of Reed-Muller Expansions modules. The order of optimal control input variables is utilized the computation of circuit cost matrix. The ternary logic circuits of the minimized tree structures to be constructed by RME modules based on Reed-Muller Expansions are realized using the computation results of its circuit cost matrix. This method is only performed under unit time in order to search for the optimal control input variables. Also, this method is able to be programmed by computer and the run time on programming is $3^n$.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.2
• /
• pp.89-94
• /
• 2015

In this study, the mixed soil with an optimum mixed ratio was suggested in order to recycle the powdered sludge of basalt in Jeju Island as the impermeable liner materials. As the results of soil laboratory tests, the grain size of the powdered sludge of basalt is less than 0.1mm and the powdered sludge was classified into ML or CL category in accordance with the Unified Soil Classification System (USCS). Also, the grain size of natural soils is ranged from 0.1 mm to 10 mm and the soils were classified into SW category in USCS. To select the optimum mixed ratio of powdered sludge, the variable permeability test was performed to various mixed soils with different powdered sludge amount under both optimum compaction and field conditions. As the results of permeability tests, the coefficient of permeability of mixed soils was decreased with increasing the mixed ratio of powdered sludge, and the mixed soil with mixed ratio of 60% has the minimum coefficient of permeability. Therefore, the optimum mixed ratio of powdered sludge is 60% for recycling the powdered sludge of basalt as the impermeable liner materials.