• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.409-417
• /
• 2013

Mu-communication board supported by multi-communication is designed with Atxmega 128A1 which is a low power energy consuming of 8-bit microcontroller. ATxmega128A1 microcontroller consists of 8 UART(Universal asynchronous receiver/transmitter) ports which can be setting appropriate user interface having command line interpreter(CLI) program with each port, 2 kbytes EEPROM, 128 kbytes flash memory, 8 kbytes SRAM. 8 URAT ports are used for the multi communication modem, GPS module, etc. and EEPROM is used for saving a configuration for program running, and flash memory of 128 kbytes is used for storing a Firm Ware, and 8 kbytes SRAM is used for stack, storing memory of global variables while program running. If we uses the hybrid communication of path optimization of VHF, TRS and CDMA to remote control AtoN(aid to navigation), it is able to remove the communication shadow area. Even though there is a shadow area for individual communication method, we can select an optimum communication method. The compatibility of data has been enhanced as using of same data frame per communication devices. For the test, 8640 of data has been collected from the each buoy during 30 days in every 5 minutes and the receiving rate of the data has shown more than 99.4 %.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.49-49
• /
• 2010

용접은 산업계의 기계 조립 및 접합을 위한 공정의 주요한 작업으로 조선, 중공업, 건설 등 산업현장에서 사람에 의한 수동적인 작업으로 대부분 수행된다. 이러한 용접 작업을 수행하는 용접 기술자는 산업 현장 훈련원과 직업 교육 학교에서 양성되지만 용접 훈련 과정은 실습 초보자에게 위험하고, 장시간 교육하기에 어려울 뿐 아니라 재료 낭비, 의사 소통의 한계, 즉석 결과 평가의 한계, 공간부족 등 다양한 문제가 있다. 그러므로, 안전하고 반복적인 실습 환경 제공하고 장시간 및 다수 교육참여 지원 등이 가능한 시스템을 구축하여 숙련된 우수 인력 조기 확보와 훈련 비용을 절감할 필요가 있다. 본 논문에서는 실제와 동일한 상호작용을 제공할 뿐만 아니라 고품질로 훈련 환경을 가시화하여 용접 상황을 동일하게 모사하는 가상 현실 기반 용접 훈련 시뮬레이터를 제시한다. 이 시스템은 용접의 형상과 환경의 고품질 가시화, 경험 DB를 통한 용접의 비드 형상 데이터 획득, 용접 토치를 이용하는 사용자 상호작용, 용접 훈련 결과 평가 및 최적 작업 가이드, 용접 콘텐츠 저작, 다양한 용접 훈련을 가시화하는 하드웨어 플랫폼으로 구성된다. 고품질 가상 용접 가시화는 경험 DB 기반 비드 형상 데이터와 신경회로망을 이용한 비드 형상 예측을 통해 실시간 비드 표현이 이루어지며 쉐이더 기반 고품질 모재 및 비드 표현, 아크 불꽃 효과 표현을 포함한다. 사용자 상호작용은 현장 작업 도구와 일치된 토치 인터페이스와 위치추적을 이용하여 토치의 작업각, 진행각, 속도, 거리 등을 반영할 수 있으며 진동과 소리 등 용접 훈련의 사실적 상호작용도 재현하였다. 용접 훈련 평가 및 최적 작업 가이드는 훈련자의 용접속도, 거리, 각도 등의 사용자 작업 결과를 그래픽으로 표현하고, 애니메이션을 통한 훈련 자세를 추후 분석할 수 있도록 하였고, 가상토치, 기준선, 수치계기 등을 이용한 최적 작업 훈련 가이드 제시하였다. 훈련 콘텐츠 저작은 메뉴UI 기반으로 용접의 전류, 전압 등의 조건과 상황을 선택하도록 제시하였고, 하드웨어 플랫폼은 워크벤치형 입체 디스플레이 방식으로 용접 환경을 가시화하였고, 위, 정면, 아래보기 등 다양한 용접 자세 변경을 지원 할 수 있도록 구축하였다. 이러한 가상현실 기반 훈련 시뮬레이터는 아크열 발생에 따른 장시간 훈련의 어려움을 극복할 수 있고, 다양한 실습 환경을 바꾸어 가며 반복적인 훈련이 가능하고, 실 재료를 사용하지 않아 재료의 낭비를 줄일 수 있는 환경 친화적인 안전하고 효율적인 훈련 실습 환경을 제공할 수 있다.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.3
• /
• pp.260-272
• /
• 2001

In this paper, we have designed a region-based image retrieval system, FRIP(Finding Region In the Pictures). This system includes a robust image segmentation scheme using color and texture direction and retrieval scheme based on features of each region. For image segmentation, by using a circular filter, we can protect the boundary of round object and merge stripes or spots of objects into body region. It also combines scaled and shifted color coordinate and texture direction. After image segmentation, in order to improve the storage management effectively and reduce the computation time, we extract compact features from each region and store as index. For user interface, by the user specified constraints such as color-care / don't care. scale-care / dont care, shape-care / dont care and location-care / dont care, the overal/ matching score is estimated and the top Ie nearest images are reported in the ascending order of the final score.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.289-294
• /
• 2012

In this paper, we take advantage of the characteristics of mobile smartphones can be serviced without the constraints of time and space, and Study was developed by a variety of mobile services were done in a traditional offline can be implemented in real-time Case Management Community. To this end, in addition to general PC/laptop, smart mobile until the configuration interface provide the same environment for HTML5 Web Switching and Optimal Network on the same device-specific browser Size to the implementation of the next generation of Web standards, HTML5-based integrated case management Web and Mobile Web. Hybrid App Development OS supports various kinds of smart devices based on SenchaTouch Mobile Framework between the server real-time synchronization and message through the implementation of the Push Notification function, administrators and guardians real-time two-way communication between the subjects is a real-time implementation of the system was implemented Case Management Community.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.19-30
• /
• 2009

The service that has recently come into the spotlight utilizes the map to first approach the map and then provide various mash-up formed results through the interface. This service can provide precise information to the users but the map is barely reusable. The sketch-map system of this paper, unlike the existing large map system, uses the method of presenting the specific spot and route in XML document and then clustering among sketch-maps. The map service system is designed to show the optimum route to the destination in a simple outline map. It is done by renovating the spot presented by the map into optimum contents. This service system, through the process of analyzing, splitting and clustering of the sketch-map's XML document input, creates a valid form of a sketch-map. It uses the LCS(Longest Common Subsequence) algorithm for splitting and merging sketch-map in the process of query. In addition, the simulation of this system's expected effects is provided. It shows how the maps that share information and knowledge assemble to form a large map and thus presents the system's ability and role as a new research portal.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.3
• /
• pp.517-524
• /
• 2018

This Paper presents the real time things control method through Web browser that has no limited by time and place. To design and realize the system that not only makes it possible to communicate with other protocols but also reinforces the advantages of each protocol, the real time communication environment, based on the WebSocket technology of HTML5 whose international standardization has recently been completed, is realized. Also, the message communication environment in the low electricity and limited communication environment is realized using MQTT(Message Queue Telemetry Transport) protocol which is in the spotlight as the optimum protocol in the IoT environment. And by designing intuitive and simple hardware and realizing the responsive web interface which is not limited by the user's contact devices, the interactive system in which the user receives real time data from the hardware and reversely the user controls the things is designed and realized.

• Archives of design research
• /
• v.17 no.4
• /
• pp.61-68
• /
• 2004

A great variety of handheld device are coming onto the market. Some have advanced features compacted into very small sized hardware. In order to maximize the capability of these devices, we need to understand the characteristics of different input methods and utilize them in a sufficient way. Our study aims to understand characteristics of each device, so that we can design user interfaces more effectively. Two experiments were conducted to compare target pointing performance with a pen and with a hardware key on small displays. In experiment 1, we examined participants' performance of target pointing with both input methods at different target sizes. It was found that pen operation is more erroneous than key based operation when target size is smaller than 5mm, but at a target size of 5mm, the error rate decreased to the same level as for key input. In experiment 2, we examined the effect of the number of targets. The results showed, with a target size of 5mm, the pen could point to targets quicker than with key input, when the distance to the target exeeds a path length of 3 steps.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.523-533
• /
• 2000

In this paper, we present the hardware implementation of a smart antenna test-bed for a real -time performance analysis of the beam-forming algorithm operating in a wide-band CDMA environments of the WLL(Wireless Local Loop) standard. The test-bed introduced in this paper includes an external PC and signal generating module as well as the beam-forming module in order to perform, analyze, and evaluate the performance of the proposed smart antenna system. In the beam-forming module, the optimal weight vector is provided by the modified CGM algorithm. The computed weight vector is transferred back to the external PC for the performance analysis based on the off-line processing. From our analysis obtained in the hardware of the test-bed, it is concluded that the proposed smart antenna system for the WLL system is appropriate for enhancing the communication quality and capacity tremendously at the cell-site of the CDMA environment.

• Journal of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.713-719
• /
• 1991

Electrochemical impedance measurement system using Fourier transform was constructed in the range of the frequencies up to 100 kHz. This system consists of pseudo-random noise generator, specially designed potentiostat, fast data acquisition system, system controller, and computer interface. The performance of the constructed system was found to be almost same as the commercially available system using lock-in amplifier. Measuring time was significantly reduced because the minimum time for the measurement depended on one cycle of the lowest frequency used. It would be possible to study time-varying electrochemical impedance systems such as the initial stages of corrosion processes using this system.

• Journal of the Korean Society for Railway
• /
• v.13 no.3
• /
• pp.264-270
• /
• 2010

This paper presents an application of the Ecological Interface Design (EID) theoretical framework for developing an optimal display of railway safety monitoring system (SMS) in stations. Especially, Work Domain Analysis (WDA) which is the preceding research for EID was conducted. This study proceeds as follows: First, urban railway SMS in stations was defined as a system boundary for WDA, and work environment for station personnels was analysed through Abstraction Hierarchy (AH). AH represents five levels (Functional Purpose, Values and Priority Measures, Purpose-related Functions, Object-related Process, Physical Object) of informations that station personnels obtain from work environment, and Work Domain Model (WDM) was derived as a result of the AH. To confirm how well WDM represents the real work environment of SMS, Scenario Mapping was conducted with experts who has been working as a station personnel for more than ten years. Lastly, thirteen additional information requirements that are not provided by the existing SMS as well as all the information that are provided by the existing SMS were extracted using confirmed WDM. These information requirements can be used as essential information for EID of urban railway SMS.