• Proceedings of the KIEE Conference
• /
• 1982.07a
• /
• pp.113-115
• /
• 1982

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.10
• /
• pp.631-638
• /
• 2017

An experimental study was conducted to investigate the effect of a rotor design on the performance characteristics of a slurry pump using the tornado principle. The slurry pump differs considerably in terms of construction as well as operating principle when compared to the conventional centrifugal pump. The design parameters of the cross-shaped rotor included the diameter, thickness and height. The total head, shaft and water powers, and pump efficiency as a function of flow rate were compared with the design parameter. It was found that as the rotor diameter and height increase, the efficiency increases, whereas, an increase in the rotor thickness decreases the efficiency. In the rotor design condition of this study, the specific area and efficiency of the maximum height rotor were, respectively, smaller and higher than those of maximum diameter rotor.

• Computational Structural Engineering
• /
• v.6 no.4
• /
• pp.10-13
• /
• 1993

본 고에서는 불확정적 Approach에 의한 구조물 거동파악의 일례를 소개한다. 이 예에서는 극치통계와 엔트로피 최대원리를 이용하여, 부동침하를 받은 쉘구조물의 응력을 추정하는 이론을 취급한다. 부동침하는 불확정적 특성을 비교적 많이 지니고 있으며, 특히 구조물을 지지하고 있는 지반의 경우는 그 물리적 정수와 침하특성이 확정론적으로는 취급이 곤란한 경우가 많다고 생각된다. 구체적으로 극치통계법에서는 부동침하를 기초 Ring의 원주방향으로의 Fourier 계수로 가정하여, 위상각과 침하의 2승평균치가 확정치로 주어졌을 때, 진폭 Spectrum을 불확정변수로 간주하여 추정하는 방법을 소개한다. 일단 진폭 Spectrum이 구해지면 응력은 간단히 구해지므로 여기서는 Spectrum에 관해서만 언급하기로 한다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.3
• /
• pp.27-31
• /
• 1974

The maximum principle of Pontryagin provides the celebrated method to obtain the optimum control switching time and switching points on the nuclear reactor. The control trajectories transfered from its initial state to the target state are optimized based on time optioptimal control method with the given reactor parameters and the piecewise constant input values.

• Journal of the KSME
• /
• v.23 no.5
• /
• pp.370-376
• /
• 1983

PC는 다음과 같은 조건을 최대한 만족하도록 제작되어야 한다. (1)제어기설계가 용이할 것 (2) 신뢰도가 높을 것 (3) 보전성이 좋을 것 (4) 주위환경에 강할 것 (5) 잡음에 강할 것 (6) 가격이 낮을 것 (7) 크기가 작을 것 (8) 규격화되어 있을 것 (9)컴퓨터와 정보교환이 용이할 것 등이다.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.498-499
• /
• 2014

본 논문에서는 3상 PWM 옵셋전압방식을 응용하여 2상 인버터에 대한 PWM 제어방식을 확립하였다. 또한 기존의 3상 PWM 인버터 옵셋전압방식과의 최대 전압영역과 비교 분석하였다.

• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.173-181
• /
• 2002

The principle of an illumination system including fly-eyes lenses for a liquid crystal display (LCD) projector with 3-panels was presented and its optical system was designed by using the OSLO (premium edition 6.1) optical system design program. Two panels of the illumination system are well aligned for so that the illumination path length is the same, and the third panel has a longer pass length than the others. The two illumination types with the same or different illumination path lengths were derived by using the paraxial ray design method. Refraction powers and positions of each lens were analytically determined by the method, and the damped least square method was utilized to obtain the optimized uniform illumination system.

• Applied Microscopy
• /
• v.37 no.3
• /
• pp.199-208
• /
• 2007

We have made an optical device to study the wave optics phenomena, such as image and diffraction pattern, constructive and destructive interference, by direct operation of laser beam and optical lenses. It consists of laser beam, goniometer, objective lens, intermediate lens, projection lens, CCD system, and computing system. As a result of the performance test, we were able to magnify samples up to 44 times with the resolution of about $5{\mu}m$. It is expected to help EM users understanding more easily principles of transmission electron microscopy (TEM).

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.1
• /
• pp.29-34
• /
• 2001

구조물설계에 있어서 영향선은 최대반력, 최대전단력, 최대휨모멘트 등을 계산하는데 아주 유용하게 사용된다. 모멘트분배법, 인도행렬법, 전달행렬법, 그리고 Muller-Breslau 원리에 의한 단순보와 연속보의 영향선은 잘 알려져 있고 또 교량공학에서 널리 사용되고 있다. 그러나 변위를 허용하는 특별한 구조물의 영향선을 계산할 경우에는 약간의 어려움이 있다. 이 연구에서는 절점변위를 허용하는 문형라멘의 영향선을 전달행렬법에 의하여 구하고 유한요소법에 의하여 얻은 영향선과 비교하였고 그 결과는 좋은 일치를 보이고 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.5
• /
• pp.483-490
• /
• 2008

Minimization of nozzle induces many flow losses in micro-propulsion system. In this study, we studied about thermal transpiration based micro propulsion system to overcome these losses. Thermal transpiration device(Knudsen pump) having no moving parts can self-pump the gaseous propellant by temperature gradient only (cold to hot). We designed, fabricated the Knudsen pump and analyzed pressure gradient efficiency of membrane according to Knudsen number under vacuum condition. Experimental results showed that thick membranes are more effective than thin membranes in transition flow regime, and pressure gradient efficiency according to Knudsen number is increased to maximum 82% apart from membrane thickness in free molecular regime.