• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.179-179
• /
• 2010

본 연구에서는 무안경식 3 차원 입체영상 기술에 쓰이는 렌티큘러 렌즈의 제작공정 중 오차(Error)로 작용할 수 있는 몇 가지 변수를 가정하였고 이러한 변수의 오차에 의해 좌우되는 가장 중요한 성능인자인 광학적 상호간섭 (Cross-Talk)을 최소화하도록 연구를 수행하였다. 이를 위해서 초정밀절삭가공과 UV경화법을 사용하였고 광학적 상호간섭 (Cross-Talk)에 가장 큰 영향을 주는 피치공차 (Allowance)를 ${\pm}0.5{\mu}m$내로 줄여서 3차원 입체감을 향상시킬 수 있음을 확인하였다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.1
• /
• pp.17-25
• /
• 2002

This system is composed of fine and coarse apparatus, measurement system and control system. Piezoelectric actuator is designed far fee positioning. We make a study of precision apparatus that is used in the various industrial machine. The study was carried out to develope a precision positioning apparatus, consisting of servo motor and piezoelectric actuator Coarse positioning using lead screw is thrived by servo motor. Control system output a signal from laser interferometer to amplifier of servo motor and piezoelectric actuator after digital signal processing (DSP). Resolution of this apparatus measure with laser interferometer. In this study, design method and control system with ultra precision position apparatus are researched. As the first step, we have estimated for control performance and system stability before an actual apparatus is manufactured by MATLAB with SIMUUNK including various frictions those are composed of pre-design and system modeling.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1495-1508
• /
• 1990

There are requirement of surface roughness in mechanical elements that has minute surface of several nm degree. When high precision surface roughness measurement is made with stylus type surface roughness measuring apparatus, measuring accuracy depend on the tip radius of diamond stylus. Therefore, ultra precision machining was accomplished using ion sputter machining in order to machining the stylus tip radius less than 0.5.mu.m, which is impossible through lapping machining. In this study, optimal machining condition for the ion sputter machining was obtained through the experiment under the various varing machinbing quantity and condition of diamond stylus. And as the result of applying this optimal condition, the good result was obtained that machining probability of stylus tip radius less than o.5.mu.m is 93%.

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.03a
• /
• pp.17-22
• /
• 2002

인공위성을 이용한 위치결정시스템인 GPS(Global Positioning System)는 mm 단위의 정밀도로 정적, 동적 위치관측이 가능한 시스템으로 현재 여러 분야에서 활용이 증가하고 있다. 특히 교량, 댐 등 안전이 요구되는 사회기반 시설물의 동적 거동을 기록하고 감시하는데 있어서 GPS가 새로운 관측시스템으로 주목받고 있으며 이를 실용화하기 위한 연구가 활발히 진행되고 있다. 본 연구에서는 GPS를 이용하여 건물의 거동상태를 점검 하는 것을 목적으로 하고 있다. 계절풍에 의한 초고층건물의 거동을 해석하기 위하여 건물 옥상에 GPS, 가속도계, 풍향계, 풍속계를 설치하였다. GPS와 가속도계로를 이용하여 건물의 변위 및 가속도를 5Hz로 관측하였다. GPS를 이용한 변위관측은 1시간, 1분, 1초 등의 간격으로 3차원 변위를 계산하였으며, 계산된 3차원 변위를 가속도계, 풍속계, 풍향계와 연계하여 해석하였다. 대상 건물에 대한 최대 변위를 관측한 결과 계절에 따라 큰 차이를 보였으며 건물의 안정성을 평가할 수 있는 척도인 건물의 고유 진동수의 경우 약 0.2Hz의 값을 얻을 수 있었다. 향후 모든 센서들을 통합하여 실시간으로 건물을 모니터링할 수 있는 시스템을 개발할 경우 건물의 안정성 해석 및 유지보수에 본 연구가 큰 기여를 할 수 있을 것으로 사료된다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.93-100
• /
• 2018

This study proposes a controller that compensates torque error for precise angular velocity tracking and a method to compensate the stability of controller in implementation. Also, it is proved that the designed controller can be asymptotically stable based on Lyapunov stability theory. The proposed controller is able to control the d-axis reference current to arbitrary values and easily achieve control performance with two gains. As a result of applying to IPMSM of about 750W class, the steady state error with reference speed 1200 [RPM] is within 0.1 [%]. And it can be seen that it is an asymptomatic stable controller overcoming disturbance within about 0.2 second in application of constant load of about 5 [Nm].

• Korean Journal of Optics and Photonics
• /
• v.22 no.1
• /
• pp.30-34
• /
• 2011

A novel alignment method that can be used for aligning the collimating mirror employed in a monochromator is described. In most of the spectrometer industry, the alignment of optical components such as a focusing mirror, a grating and a collimating mirror has been performed manually so far. In this paper, we use a matchedfilter based image correlation technique for measuring the accurate image position which is used for aligning the collimating mirror. The experimental results show that with the proposed scheme automatic alignment can be completed within 10 seconds.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.807-808
• /
• 2010

To insert payload to the orbit over the 200km-altitude using launch vehicle which has 300sec the Isp, multi staging technique for launch is necessary. The range between the sea-level to the transfer orbit about 200~250km is for operation of 1st and 2nd rocket engines and the higher altitude is for propulsion system of the acceleration block and satellite. The upper stage rocket engine should have the high technology for entering the payload into the orbit precisely more than the performance for high thrust level. With this investigation of the upper stage rocket engines which have been used, we want to understand their development trend and prospect which is going to be references for the development of ours.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.3
• /
• pp.419-425
• /
• 2010

To machine the micro hole, laser machining system is widely used, however, the system cannot fabricate the micro hole with high aspect ratio and good surface finish. To break the obstacles, the high frequency vibration mechanism with PZT (Piezoelectric Transducers) is proposed in this paper. The mechanism will vibrate the laser beam in vertical direction so that the aspect ratio and surface finish may be higher than the conventional. The mechanism vibrates the eyepiece of laser optics. In addition to the benefits, the mechanism enables us to have high precision and flexibility. It decreases burr and debris during machining. And it is able to machine various materials of workpiece. This research include high frequency and large travel range of the proposed mechanism. The PZT motion of mechanism and analysis on the sensitivity of design parameters are extracted from a finite element method (FEM) simulation. In the analysis, the target vibration mode without parasitic motion is designated to have the target frequency and high amplitude.

• Journal of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.220-225
• /
• 1985

An attempt was made to determine some trace metals in highly concentrated samples using micro sampling technique in flame atomic absorption spectrophotometry. Major instrumental parameters and optimun analytical conditions investigated were the measuring time of instrument (the speed of electronics), sample volume, burner height, aspiration rate, and fuel to oxidant ratio. Advantages of the present technique are not only rapid, simple, and sensitive with good precision but also capability of analyzing small volume of sample and ability to handle highly concentrated samples without serious burner clog-up problem compared to conventional flame atomic absorption.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.308-314
• /
• 2006

A line scan camera is applied to enhance COG(Chip On Glass) inspection accuracy to be measured a few micro unit. The foreign substance detection among various faulty factors has been the most difficult technology in the faulty automatic inspection step since COG pattern is very miniature and complexity. In this paper, we proposed two step area segmentation template matching method to increase matching speed. Futhermore to detect foreign substance(such as dust, scratch) with a few micro unit, the new method using gradient mask and AND operation was proposed. The proposed 2 step template matching method increased 0.3 - 0.4 second matching speed compared with conventional correlation coefficient. Also, the proposed foreign substance applied masks enhanced $5-8\%$ faulty detection rate compared with conventional no mask application method.