• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.508-514
• /
• 2008

Knowledge management has been spread rapidly since Knowledge is regarded as a crucial asset in future. Once, Knowledge had been obtained freely but hard to be shared. Studies on importance and share of knowledge have been taking place and it leads to development of knowledge management systems. However, decision makers still have problems even though they are using knowledge management systems. Eventually, for the decision makers are needed concentrated knowledge which is unconscious and embodied, when they make a decision. This is wisdom. Thus, wisdom is superior to knowledge for the decision makers. There are some researches on wisdom but wisdom management were overlooked. This study presents differences between knowledge and wisdom with theoretical research and empirical analysis on the wisdom management.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.1
• /
• pp.153-158
• /
• 2005

Titanium alloy has widely been used as material for automotive parts because it has high specific strength. It is also light and harmless to human body. But, we have little design data about the creep behaviors of the alloy. Therefore, in this study, creep tests under four constant stress conditions have been conducted with low different temperature conditions. A series of creep tests had been performed to get the basic design data and life prediction of titanium products and we have gotten the fallowing results. First, the stress exponents decrease as the test temperatures increased. Secondly, the creep activation energy gradually decrease as the stresses became bigger. Thirdly, the constant of Larson-Miller parameter on this alloy was estimated as about 7.5. And for the last, the fractographs at the creep rupture showed the ductile fracture due to the intergranullar rupture.

• Analytical Science and Technology
• /
• v.15 no.3
• /
• pp.185-189
• /
• 2002

International Olympic Committee (IOC) prohibits the use of cyclofenil for male. To prove whether cyclofenil product was taken or not, the analytical method in urine using GC/MS was established. The extraction recoveries of cyclofenil and its metabolites were higher in the range of pH 5-9. Because the parent drug (cyclofenil) was not excreted in urine, metabolites were detected and theses were used as a criteria of cyclofenil dose. Therefore the metabolites were hydrolyzed, extracted at pH 9.6, derivatized with MSTFA and analyzed by GC/MS.

• Analytical Science and Technology
• /
• v.11 no.6
• /
• pp.429-435
• /
• 1998

Free and glycine conjugated bile acids were detected fluoromatrically in high-performance liquid chromatography after derivatization with dansyl cadaverine. The coupling agent, diethyl phosphorocyanidate was used to form the amide bond between dansyl cadaverine and analytes. The dansyl derivatives of 8 bile acids were separated successfully on Cosmosil ODS column by using linear gradient elution of 20% MeOH-water/$CH_3CN$. The detection limits of cholic acid was reached 10 pg(S/N=5) per $1{\mu}l$ of injected volume. This new derivatization method would be applicable to detect the changes of bile acids in biological samples.

• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.141-147
• /
• 1993

The behavior of reverted austenite in Fe-Ni-Mn(Ti) maraging steels has been investigated in the temperature range from $400^{\circ}C$ to $550^{\circ}C$ using TEM equipped with EDX. Four kinds of reverted austenite appeared depending on the aging temperatures and time : Widmanstatten, granular, lath-like and recrystallized austenite. The reverted austenites are enriched in Ni and Mn due to the dissolution of precipitates and redistribution of alloying elements. Widmanstatten austenite appears unformly in the lath martensite having the K-S orientation relationship with the martensite lath, while lath-like martensites showed K-S and N relations depending on the chemistry and heat treating condition. The recrystallized austenite forms at $550^{\circ}C$ after long aging times : some becomes unstable and transforms to lath martensite on cooling.

• Journal of Korea Foundry Society
• /
• v.27 no.5
• /
• pp.221-223
• /
• 2007

공구강은 C, Cr, V, Mo, W, Co 및 Si 과 같은 첨가원소를 함유한 복잡한 철계 합금으로 주요 특성인 경도, 부식저항성, 열 연화저항성 그리고 인성의 요구수준에 따라 화학성분이 결정된다. 본 연구에서는 1.0C, 0.2Mn, 3.8Cr, 1.5W, 8.5Co, 9.2Mo, 1.0V 조성의 M42 공구강의 미세조직과 열간가공성에 미치는 Si 함량의 효과를 체계적으로 조사하였다. 진공유도용해를 이용하여 Si 함량을 중량비로 0.33 에서 1.7% 까지 변화시켜 $140{\times}140{\times}330\;mm^{3}$ 크기의 잉곳으로 제조하였다. 이렇게 제조한 잉곳들은 $1150^{\circ}C$에서 1.5시간 동안 용체화처리한 후 노냉하였고, 이어 $1180^{\circ}C$에서 15mm 두께의 판재로 열간압연하였다. 공정 탄화물의 형상 및 분해 거동을 중심으로 미세조직을 관찰한 결과 Si 함량이 증가함에 따라 분해속도가 느려지는 것을 알 수 있었고 이로 인해 열간성형성이 급격히 저하되는 것으로 나타났다.

• Journal of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.94-97
• /
• 1987

In a converting reaction of $p-bromo-\alpha-diethylaminoacetophenone$ (1a) and $p-bromo-\alpha-piperidinoacetophenone$ (1b) with KCN and $(NH_4)_2CO_3$, to hydantoin, the expected 5-(p-bromophenyl)-5-diethylaminomethylhydantion (2a) and 5-(p-bromophenyl)-5-piperidinomethylhydantoin (2b) were not formed. Diethylaminomethyl group and piperidinomethyl group were eliminated and p,p'-dibromodiphenylhydantil (4), which might be formed through dimerization of 5-(bromophenyl)-hydantoin (3), and p-bromobenzoic acid (5), which was formed through a degradation of 5-(bromophenyl)-hydantoin, were obtained. In the case of $p-bromo-\alpha-morpholinoacetophenone$ (1c), the expected 5-(p-bromophenyl)-5-morpholinomethylhydantoin (2c) was formed.

• Journal of Aquaculture
• /
• v.10 no.1
• /
• pp.49-54
• /
• 1997

Characteristics of sex ratio and morphometric traits of induced allotriploid between female rainbow trout, Oncorhynchus mykiss and male cherry salmon, O. masou were performed. Sex ratios in both rainbow trout and cherry salmon were equally 1:1, while hybrid and allotriploid revealed higher proportion of male offspring (p<0.01). Body trait measurements of allotriploid in head hight/head length, length of dorsal fin base/body length and length of pectoral fin/body length were intermediate to their parental species, while in length of upper jaw/head length, allotriploid much more resembled that of rainbow trout. These facts proved that allotriploidization improved characters in sex ratio and morphometric traits compared to those o their parental species.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.1
• /
• pp.183-186
• /
• 2018

After core virtues for character development are determined, how to train and embody character qualities is important issue. It is not only by having knowledge of character qualities but also by practicing them and expanding opportunities of experiencing them. In this paper, core virtues are classified by 7 leadership perspectives, and through poll validity of character development in view of 7 leadership perspectives is studied. Using the result of the study, each student can focus on developing character qualities which are more needed for his own leadership style.

• YAKHAK HOEJI
• /
• v.37 no.1
• /
• pp.1-8
• /
• 1993

A procedure for the high-performance liquid chromatographic determination of Nebramycin factors in fermentation broth of Streptoalloteichus hindustanus ATCC 31218 mutant was investigated using pre-column derivatization and LTV detection. The method is based on pre-column derivatization of Nebramycin factors with 2,4-dinitrofluorobenzene(DNFB) in the presence of Tris (hydroxymethyl)aminoethane. The chromatographic separation of derivatives of Nebramycin factors and unknown impurities is achieved using reversed-phase column (NOVA-PAK $C_{18}$, Waters Co.) and AcCN : H$_{2}$O : AcOH (53.0:46.5:0.5) as a mobile phase. The mixture of these derivatives were separated within 35 minutes and the optimum wavelength($\lambda_{max}$ ) of the UV detector was 353 nm. The linearity of response for derivatives of Nebramycin factors is demonstrated for concentrations up to 500 $\mu\textrm{g}$/ml and the relative standard deviation is less than 0.79%. Detection limit was 1.67 ng for the 10 $\mu\textrm{l}$ sample volume employed.