• Title/Summary/Keyword: 첩도

Search Result 163, Processing Time 0.031 seconds

A 1.2V 90dB CIFB Sigma-Delta Analog Modulator for Low-power Sensor Interface (저전력 센서 인터페이스를 위한 1.2V 90dB CIFB 시그마-델타 아날로그 모듈레이터)

  • Park, Jin-Woo;Jang, Young-Chan
    • Journal of IKEEE
    • /
    • v.22 no.3
    • /
    • pp.786-792
    • /
    • 2018
  • A third-order sigma-delta modulator with the architecture of cascade of integrator feedback (CIFB) is proposed for an analog-digital converter used in low-power sensor interfaces. It consists of three switched-capacitor integrators using a gain-enhanced current-mirror-based amplifier, a single-bit comparator, and a non-overlapped clock generator. The proposed sigma-delta analog modulator with over-sampling ratio of 160 and maximum SNR of 90.45 dB is implemented using $0.11-{\mu}m$ CMOS process with 1.2-V supply voltage. The area and power consumption of the sigma-delta analog modulator are $0.145mm^2$ and $341{\mu}W$, respectively.

Reproductive Cycle of Marsh Clam, Corbicula leana (Prime) in Hyongsan Estuary (형산강하구에 서식하는 참재첩 (Corbicula leana (Prime))의 생식주기)

  • Kim Jin-Hee;YOO Myong-Suk
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.33 no.3
    • /
    • pp.184-191
    • /
    • 2000
  • Gametogenesis and the reproductive cycle of the marsh clam, Corbicula leana(Prime} were investigated monthly Hyongsan estuary, Korea from January to December 1998 by histological observation. C. leana had separate sexes, and oviparous. The gonads were located between the sub-region of mid-intestinal gland in visceral cavity and reticular cennective tissue. The ovary and testis were composed of a number of ovarian and testicular tubules, respectively, Mature oocytes were characterized by germinal vesicles with nucleoli and their sizes ranged $70\;to\;80{\mu}m$ in diameter. A number of mesenchymal tissues and pigment granular cells were distributed in the growing oocytes and spermatocytes during early developmental stages. With the further development of gonad, these tissuse and cells gradually disappeared. The monthly changes in the fatness index were closely related to reproductive cycle. Minimun size for sexual maturity was reached over 10.0 mm in shell length. The reproductive cycle could be classified into 6 stages : multiplicative (March to April): early growing and growing (May to June), mature (July to August), spent (September), degenerative (October) and recovery (November to February).

  • PDF

A VPP Generator Design for a Low Voltage DRAM (저전압 DRAM용 VPP Generator 설계)

  • Kim, Tae-Hoon;Lee, Jae-Hyung;Ha, Pan-Bong;Kim, Young-Hee
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2007.10a
    • /
    • pp.776-780
    • /
    • 2007
  • In this paper, the charge pump circuit of a VPP generator for a low voltage DRAM is newly proposed. The proposed charge pump is a 2-stage cross coupled charge pump circuit. The charge transfer efficiency is improved, and Distributed Clock Inverter is located in each charge pump stage to reduce clock period so that the pumping current is increased. In addition, the precharge circuit is located at Gate node of charge transfer transistor to solve the problem which is that the Gate node is maintained high voltage because the boosted charge can't discharge, so device reliability is decreased. The simulation result is that pumping current, pumping efficiency and power efficiency is improved. The layout of the proposed VPP generator is designed using $0.18{\mu}m$ Triple-Well process.

  • PDF

Personality and Behavior Analysis of the Characters in -With focus on Enneagram Type- (만화 <나루토> 속의 캐릭터 성격과 행동 분석 -에니어그램 유형을 중심으로-)

  • Liu, Si-Jie;Park, Sung-Won
    • Cartoon and Animation Studies
    • /
    • s.43
    • /
    • pp.23-46
    • /
    • 2016
  • Japanese "Manga" (Comics) and animation films are very popular among the audiences from many countries. Japan is creating various new cultural contents through comics and animation films, and it became one of the important economic growth driver. Japanese famous comic Naruto, which had been successfully concluded recently, have achieved great success and gained popularity globally. One of the reasons for the success of Naruto is the various characters in the comic. In, there are various characters with different personalities and characteristics. Characters are important factors that makes the story stands out and delivers the story. Furthermore, the characters in the story often reflect the author's psychology and mind. By analyzing the characters' behavior and personalities, the audience can follow the story more interestingly, and understand the author's message better. The objective of this study is to analyze the Naruto's main characters' personality and characteristics through enneagram. Furthermore, the report explains the success of by analyzing the different behaviors that results from different personalities, and the relationship between the characters.

Characteristics on Spawning-Host Selection and Early Life History of Sarcocheilichthys nigripinis morii (Pisces, Cyprinidae) (중고기(Sarcocheilichthys nigripinis morii)의 산란숙주 선택 및 초기 생활사 특성)

  • Kang, Eon-Jong;Yang, Hyun;Lee, Heung-Heon;Kim, Eong-Oh;Kim, Chi-Hong
    • Korean Journal of Environmental Biology
    • /
    • v.25 no.4
    • /
    • pp.370-377
    • /
    • 2007
  • The spawning host selection and adaptive characteristics in life history were investigated for Sarcocheilichthys nigripinnis morii which has similar habit of spawning with acheilognathine fishes. The fertilized eggs of the species were found in the mantle cavity of Corbicula papyracea and C. fluminea among the bivalves collected from same locality, meaning the species specific host selection for the spawning. We considered that the differences in the status of expanding egg membrane after hydration, fewer number of eggs settled into the mantle cavity and having eleutheroembryo with developed organ would be some evidences of specific reproductive strategy for this species. But the status of developed surface blood circulation was thought to be a compensation for the parasitism. The pigmentation of melanopore delayed to late embryo and the spot on the caudal region was a characteristics of this species appeared in the early life history.

Improved Adhesion Strength of the Gradient Zn-Mg Coating on TRIP Steel (TRIP강에서 박막 깊이의 Mg 함량의 변화에 따른 밀착력에 관한 연구)

  • Song, Myeon-Gyu;Kim, Hoe-Geun;Lee, Sang-Yul
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2018.06a
    • /
    • pp.136-136
    • /
    • 2018
  • 듀얼 페이즈(DP) 강철과 같은 고강도강(HSS), TRIP강, TWIP강은 무게를 줄이고 자동차의 안전을 향상시키기 위해서 자동차 산업에서 광범위하게 쓰이고 있다. HSS강의 내부식성을 향상시키기 위해서, 향상된 박막 재료와 기존의 아연도금 공정을 대체하는 공정 방법이 필요하다. Zn-Mg 박막은 강의 부식 방지에 대한 강력한 후보이며, 물리적 기상 증착 공정(PVD)은 강의 Zn-Mg 박막의 증착을 위한 유망한 공정이다. 그러나 이전 연구에서 보고 된 바와 같이 Zn-Mg 박막은 Zn-Mg 박막의 높은 취성으로 인하여 Zn 박막에 비하여 접착력이 매우 불충분하였다. 따라서 본 연구에서는 Zn-Mg 박막의 첩착력을 향상시키기 위해 TRIP강 기판 위에 증발 증착법을 활용하여 Zn-Mg/Zn 이중층 박막을 합성하고 진공에서 열처리를 실시하여 박막의 깊이에 따른 Mg의 함량 변화를 유도하였다. Zn-Mg/Zn 박막 합성 시 EMH-PVD를 활용하여 증착하였으며, Zn 중간층을 모재와 Zn-Mg 층 사이에 증착하고 진공중에서 열처리를 실시하여 박막 내에서 Mg 함량의 기울기 변화가 박막의 밀착력에 주는 영향을 평가하였다. 증착된 박막은 FE-SEM을 통하여 미세조직과 박막의 두께를 분석하였고 line-EDS를 통하여 깊이에 따른 Zn와 Mg의 변화를 분석하였으며 XRD를 사용하여 합금상을 분석하였다. Lap shear test를 활용하여 박막의 밀착력을 정략적으로 분석하였다. FE-SEM 및 EDS 분석 결과 Zn-Mg/Zn 박막을 진공에서 열처리를 실시한 후 FE-SEM으로 분석한 결과 미세조직의 큰 차이는 보이지 않았으나, line-EDS 결과 Mg이 확산되는 것을 확인 할 수 있었다. XRD 분석 결과 확산한 Mg에 의해서 Zn상은 감소하고 $Mg_2Zn_{11}$, $MgZn_2$와 같은 합금상은 증가하는 것을 확인하였다. Lap shear test 결과 $200^{\circ}C$에서 열처리한 Zn-15wt.%Mg/Zn 박막의 경우 밀착력이 19 MPa로 열처리를 하지 않았을 경우(11 MPa)보다 향상되는 것을 확인하였다. 이러한 결과는 통하여 Zn-Mg 박막의 두께의 Mg의 함량 변화에 의해서 박막의 밀착력이 변화되는 것을 알 수 있다.

  • PDF

Studies on the Oxygen Permeability and It's Proofness of the Various Commercial Polymer Films (상업용 고분자 필름의 산소투과도 및 산소투과 방지도에 관한 연구)

  • Suh, Hwan-Kyu;Kim, Joon-Soo;Lee, Jung-Keun
    • Elastomers and Composites
    • /
    • v.15 no.1
    • /
    • pp.3-9
    • /
    • 1980
  • The oxygen permeability and it's proofness of te various commercial polymer films have been investigated at the constant pressure and temperature. Oxygen proofness, the reciprocals of the oxygen permeability for the various samples, were determined by means of a coulometric oxygen permeability tester. The testing of sample films was performed at constant temperature $(23{\pm}1^{\circ}C)$ under 1 atm. for 24 hours. The order of the relative proofness observed are as follows; oriented Nylon (O. Nylon)> oriented Polyester (O. PET)>nonoriented Nylon (N. Nylon)>nonoriented Polyester (N.PET)> rigid Polyvinyl chloride (Rigid PVC)>semirigid Polyvinyl chloride (Semirigid PVC)> oriented Polypropylene (O. PP)>plasticized Polyvinyl chloride (P. PVC)> casted Polypropylene (C. PP)> low density Polyethylene (LDPE)>high density Polyethylene (HDPE, Inflation)> high density-polyethylene (HDPE, T-die) The oxygen proofness of the films was increased with the polarity cf polymer, the film thickness and mechanical orientation and decreased with the addition of plasticizer in PVC. For the use of wrapping materials, one film with the polar property in the main chain of the polymer molecule and the others with nonpolar property in it are laminated for the protection from oxygen and moisture.

  • PDF

A Study on a 3-Dimensional Positioning System over Indoor Wireless Environments (실내 무선 환경에서 3차원 위치 추적 시스템에 관한 연구)

  • Kang, Byeong-Gwon;Choi, Sung-Ja;Kim, Gui-Jung;Park, Yong-Seo
    • Journal of Digital Convergence
    • /
    • v.12 no.11
    • /
    • pp.273-279
    • /
    • 2014
  • In this paper, we propose a novel algorithm for three dimensional positioning system and implement a system over indoor wireless channel. A commercial modules are used for mobile and fixed nodes which are product of German company Nanotron Co. This module adopts chirp spread spreading scheme as modulation method to improve the ranging resolution and the module satisfies the IEEE standard 802.15.4a. The distance computation is based on received signal strength(RSS) levels and trilateration method. A testbed was set up to measure and compare the positioning estimation error of the proposed algorithm. The experiments results showed that the accuracy of location estimation was sufficiently good as much as 1m distance error in a wireless environment in an office building.

A Study on Effect and Satisfaction of Acupoint Sticking in Hottest Period of Summer (삼복첩의 치료 효과와 만족도에 대한 연구)

  • Song, Ji Hyun;Lee, Jin Hwa;Kim, Yun Hee
    • The Journal of Pediatrics of Korean Medicine
    • /
    • v.32 no.1
    • /
    • pp.1-10
    • /
    • 2018
  • Objectives The purpose of this study is to understand effect on respiratory disease and satisfaction of parents about acupoint sticking in hottest period of summer. Methods A survey was conducted to the parents of their children who took acupoint sticking in Dog-days for two years in a row. 17 children (10 boys, 7 girls, 4.0-12.11 years) were attached Socheongo to BL-13, BL-15, BL-17 for 3 hours. In terms of the effectiveness of the therapy, the treatment only considered as effective when there is any improvement in respiratory symptoms. Results 11 children (64.7%) from the study group have shown positive effect. There were significant improvements in frequency of having a cold or duration of a cold; duration of rhinitis; frequency of having empyema or its duration; frequency of having bronchitis; frequency of having pneumonia; frequency of having otitis media. Respiratory health VAS (Visual Analog Scale) had significant increase from 5 to 6.71 (p<0.05). 7 parents (41.2%) were satisfied with acupoint in hottest period of summer and 16 parents (94.1%) wanted to have their children get treated again in next year. From the survey, inconveniences of acupuncture were weak attachment of the acupoint (23.5%), long attaching time (11.8%), pressure about number of treatments (5.9%), worry about side effects (5.9%). Side effects have been reported; 2 pruritus (11.8%), 1 pruritus and erythema (5.9%). Conclusions Acupoint sticking in hottest period of summer improves lung symptoms in children older than three years old. However, the ways to reduce the side effects and inconveniences are needed.

Effect of Yeosin-dan on dystocia caused by abnormal expulsive fences in Primipara (여신단(如神丹) 첩부가 만출력 이상에 의한 난산을 해소한 임상증례보고)

  • Choi, Dae-Kyoung;Yoo, Sa-Hyun;Kim, Yang-Sik;Sohn, Yeong-Joo;Sohn, Nak-Won;Kim, Seong-Jun
    • The Journal of Korean Obstetrics and Gynecology
    • /
    • v.18 no.4
    • /
    • pp.219-229
    • /
    • 2005
  • Objective : This clinical study investigated the effect of Yeosindan on dystocia caused by abnormal expulsive forces. Methods : Yeosindan was applied on the umbilicus of a primipara who had gone through latent phase for 15hrs and was almost expected to undergo C-sec by dystocia. It was sealed with an plaster. Yeosindan was removed immediately after the delivery. Results : 1. 90 minutes after Yeosindan had been applied on the umbilicus of the primipara, the active phase dilatation of uterus was started normally. 2. After 190 minutes from the Yeosindan application, the 2nd stage of labor was finished. 3. In this case, the delivery time, of which average is 344 minutes from the active phase to the second stage of labor, was reduced by 244 minutes. 4. So far, no abnormal condition has been detected in both the neonates and the primiparas.

  • PDF