• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.178-180
• /
• 2020

기존의 철도차량용 무선전력전송 시스템은 Medium-voltage (MV) 60 Hz 중전압 AC 계통 전압을 Low-voltage (LV) DC로 변환하기 위해 저주파 변압기와 정류기를 사용한다. 하지만 수 MW급의 대전력을 낮은 DC 전압으로 전송하려면 인버터는 수백 A - 수 천 A 이상의 전류용량을 가져야하므로 정류기의 출력 단에 직렬 또는 병렬로 연결된 여러 개의 고주파 변압기를 필요하게 된다 (그림 1참조). 이러한 저주파 변압기, 정류기 및 고주파 변압기는 크고 무거우므로 낮은 전력밀도 및 높은 시스템 가격의 원인이 된다. 본 논문에서는 이러한 저주파변압기, 정류기, 고주파 변압기를 사용하지 않는, 여자 코일을 이용한 새로운 멀티레벨 무선전력전송 시스템의 토폴로지를 제안한다. 제안된 멀티레벨 무선전력전송 시스템은 멀티레벨 인버터의 각 출력 단에 여자코일 (excitation coil) 이 연결되어 있다. 이 여자코일들은 급전코일 (transmitter coil) 에 전기적으로는 절연되었지만 자기적으로 강하게 결합된다. 여자코일들이 발생시킨 자기장은 급전코일에 유도전압을 발생시키고, 급전코일에서 수백 A 이상의 큰 전류를 흐르게 하여 급전코일에서 강한 자기장을 발생하도록 한다. 이 자기장은 급전코일과 수 cm 이상 떨어져 자기적으로 약하게 결합된 집전코일 (receiver coil) 에 다시 유도전압을 발생시켜 전력을 전달하게 된다. 제안한 새로운 멀티레벨 무선 전력 전송 시스템은 시뮬레이션을 통해 검증했다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.2
• /
• pp.94-101
• /
• 1989

Transport properties of 2DEG at AlGaAs/GaAs interface such as average electron energy, flight distance, each valley occupancy ratio, average electron velocity for various fields are investigated by MONTE-CARLO method. As the electric field increases, more electrons transit drastically from (000) valley to (000) upper valley. This phenomenon shows the nonstationary effect such as velocity overshoot. The duration of the transient decreases from about 1.4 psec for electric field E = 7KV/cm to about 0.7 psec for 12KV/cm. The average electron velocity during transient transport in 2DEG is about 8 times the steady-state velocity for E = 12KV/cm at room temperature. In comparison with bulk GaAs the peak velocity in the 2DEG is higher than that in even pure bulk GaAs at electric field E = 7 KV/cm. On the basis of the fact that the electrons in the 2DEG have larger peak velocity and shorter transient time of velocity than those in the bulk GaAs, it is suggested that the device with 2DEG may obtain higher mobility than that with bulk GaAs.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.3
• /
• pp.93-101
• /
• 2001

In this paper, we propose an image downscaler used in multimedia video applications, such as DTV, TV-PIP, PC-video, camcorder, videophone and so on. The proposed image downscaler provides a scaled image of high-quality and high-performance. This paper will explain the scaling theory using two-dimensional digital filters. It is the method that removes an aliasing noise and decreases the hardware complexity, compared with Pixel-drop and Upsamling. Also, this paper will prove it improves scaling precisians and decreases the loss of data, compared with the Scaler32, the Bt829 of Brooktree, and the SAA7114H of Philips. The proposed downscaler consists of the following four blocks: line memory, vertical scaler, horizontal scaler, and FIFO memory. In order to reduce the hardware complexity, the using digital filters are implemented by the multiplexer-adder type scheme and their all the coefficients can be simply implemented by using shifters and adders. It also decreases the loss of high frequency data because it provides the wider BW of 6MHz as adding the compensation filter. The proposed downscaler is modeled by using the Verilog-HDL and the model is verified by using the Cadence simulator. After the verification is done, the model is synthesized into gates by using the Synopsys. The synthesized downscaler is Placed and routed by the Mentor with the IDEC-C632 0.65${\mu}{\textrm}{m}$ library for further IC implementation. The IC master is fixed in size by 4,500${\mu}{\textrm}{m}$$\times$4,500${\mu}{\textrm}{m}$. The active layout size of the proposed downscaler is 2,528${\mu}{\textrm}{m}$$\times$3,237${\mu}{\textrm}{m}$.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.153-160
• /
• 2010

It is necessary to determine accurate 3-dimensional coordinates of the building corner points that could be control or check points in order to verify the accuracy of 3D digital maps in the near future. The usual process of obtaining the coordinates of the building corner points is to set up the ground control points with a GPS and then to practice terrestrial survey such as distance or angle measurements. However, since an error in the ground control points can be propagated through the terrestrial survey into the final coordinates of the buildings, accurately should be considered as much as possible. The actual effect of the GPS-derived ground control point error on the estimates of the unknowns through the terrestrial survey is mathematically analyzed, and the simulation data is tested numerically. The error of the ground control points is tested in the cases of 1-4 cm for the horizontal components and 2-8 cm for the vertical component. The vertical component error is assigned twice the horizontal ones because of the characteristics of the GPS survey. The distance measurement is assumed for convenience and the precision of the estimated coordinates of the building corner points is almost linearly increased according to the errors of the ground control points. In addition, the final estimates themselves can vary by the simulated random errors depending on the precision of the survey instrument, but the precision of the estimates is almost independent of survey accuracy.

• Journal of Food Hygiene and Safety
• /
• v.16 no.3
• /
• pp.200-205
• /
• 2001

In this study, occurrence of aflatoxin M$_1$(AEM$_1$) in domestic milk and milk products was determined. The level of AFM$_1$ in market milk (0.047 ppb) was lower than that in raw milk (0.083 pub) but this looks like that is due to dilution in collecting process rather than the effect of sterilization. In the case of nonfat dry milk, level of AFM$_1$appeared high by 0.24 ppb but it is thought to be not different from market milk actually because nonfat dry milk is diluted at intake. In the case of ice cream, finished products were contaminated with AFM$_1$of 0.020 ppd and also have the possibility of the contamination of AFB$_1$due to secondary raw material such as nuts and almond. On the basis of the results of this study and previous studies, Monte-Carlo simulation is conducted to estimate the contamination level of AFM$_1$in domestic market milk. To consider uncertainty and variability fitting procedure was passed through. And we used beta distribution to estimate the prevalence and triangular distribution to estimate the concentration level of AFM$_1$in milk. As a result, the 5%, 50% and 95% points of the distribution of the probability of AFM$_1$contamination level in milk is 0.0214, 0.0946 and 0.1888 ppb, respectively. Also we estimate that AFM$_1$in almost milk was low more than 0.5 ppb that is American acceptable level but 80.4% exceeded far 0.05 ppb that is European standard.

• The Journal of the Acoustical Society of Korea
• /
• v.7 no.4
• /
• pp.31-53
• /
• 1988

In this work we study extensively the structures and performance characteristics of the block least mean-square (BLMS) adaptive digital filters (ADF's) that can be realized efficiently using the fast Fourier transform (FFT). The weights of a BLMS ADF realized using the FFT can be adjusted either in the time domain or in the frequency domain, leading to the time-domain BLMS(TBLMS) algorithm or the frequency-domain BLMS (FBLMS) algorithm, respectively. In Part Ⅰof the paper, we first present new results on the overlap-add realization and the number-theoretic transform realization of the FBLMS ADF's. Then, we study how we can incorporate the concept of different frequency-weighting on the error signals and the self-orthogonalization of weight adjustment in the FBLMS ADF's , and also in the TBLMS ADF's. As a result, we show that the TBLMS ADF can also be made to have the same fast convergence speed as that of the self-orthogonalizing FBLMS ADF. Next, based on the properties of the sectioning operations in weight adjustment, we discuss unconstrained FBLMS algorithms that can reduce two FFT operations both for the overlap-save and overlap-add realizations. Finally, we investigate by computer simulation the effects of different parameter values and different algorithms on the convergence behaviors of the FBLMS and TBLMS ADF's. In Part Ⅱ of the paper, we will analyze the convergence characteristics of the TBLMS and FBLMS ADF's.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.2
• /
• pp.135-146
• /
• 2020

To define an interface in a conventional level-set method, an analytical function must be revealed for an interfacial geometry. However, it is not always possible to define a functional form of level sets when interfaces become complex in a Cartesian coordinate system. To overcome this difficulty, we have developed a new level-set formalism that discriminates the interior from the exterior of a CAD modeled interface by parameterizing the stereolithography (STL) file format. The work outlined here confirms the accuracy and scalability of the hydrodynamic reactive solver that utilizes the new level set concept through a series of tests. In particular, the complex interaction between shock and geometrical confinements towards deflagration-to-detonation transition is numerically investigated. Also, a process of flame spreading and damages caused by point source detonation in a real-sized plant facility have been simulated to confirm the validity of the new method built for reactive hydrodynamic simulation in any complex three-dimensional geometries.

• Journal of Korea Port Economic Association
• /
• v.28 no.2
• /
• pp.75-93
• /
• 2012

The steel cargoes as the core raw materials for the manufacturing industry have important roles for increasing the handling volume of the port. In particular, steel cargoes are fundamental to vitalize Port of Incheon because they have recognized as the primary key cargo items among the bulk cargoes. In this respect, the IPA(Incheon Port Authority) ambitiously developed the port complex facilities including dedicated terminals and its hinterland in northern part of Incheon. However, these complex area has suffered from low cargo handling records and has faced operational difficulties due to decreased net profits. In general, the import and export steel cargo volumes are sensitively fluctuated followed by internal and external economy index. There is a scant of research for forecasting the steel cargo volume in Incheon port which used in various economy index. To fill the research gap, the aim of this research is to predict the steel cargoes of Port of Incheon using the well established methodology i.e. System Dynamics. As a result, steel cargoes volume dealt with in Incheon port is forecasted from about 8 million tons to about 10 million tons during simulation duration (2011-2020). The Mean Absolute Percentage Error (MAPE) is measured as 0.0013 which verifies the model's accuracy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.587-599
• /
• 2018

In building-integrated photovoltaic (BIPV) systems, power generation functions are integrated into building functions by installing solar modules in combination with building materials. While this integration appears to be attractive, a design method is needed to achieve maximum power generation. Previously, the influence of the design elements on power generation was analyzed by computer simulations and demonstration tools. On the other hand, problems remain due to the inaccuracy of power generation analysis and relationship analysis, and limited demonstration. To solve this problem, this paper proposed the use of an extended demonstration mock-up. The mock-up was designed and constructed by implementing the design elements of the module types, installation angles, and direction. The actual operation data for one year were analyzed to evaluate the effects of the design elements on power generation. These results can be used to determine the feasibility of future BIPV systems and the optimal selection of system design elements.

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.701-708
• /
• 2014

This study is aimed to obtain the influence of port hinterlands on container cargo volumes of Incheon port using System Dynamics(SD). Also, macro economic index such as exchange rates(US dollar), balance of current account, capital balance, Japan trade, China trade, export unit value index, import unit value index, total turnover of Incheon port were used as the factors that influence container cargo volumes of Incheon port. Moreover micro index regarding port hinterlands' operating companies such as total sales, rental fee, number of employees were introduced in the simulation model. In order to measure accuracy of the simulation, this study implemented MAPE analysis. And after the implementation, the simulation was decided as a much more accurate model because MAPE value was calculated to be within 10%. This study respectively examined factors using the sensitivity analysis. As a result, in terms of the effects on cargo volume in Incheon Port, the factor named 'cargo volumes of port hinterlands' operating companies' is most significant. And increasing the rental fee of hinterland was resulted in decreasing the cargo volumes of Incheon port.