• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.4
• /
• pp.97-105
• /
• 2004

As modern society has been progressed, the demolition method of concrete structure that satisfy the condition of safety, economic efficiency, and environment-friendliness is required. This study investigated problems of existing demolition methods and developed modified method minimizing cooling water and sludge for demolition job. It was also verified the validity of this method based on the finite element methods. A analysis parameters as a number, depth and size of boring, and self weight were introduced for this study, and gave optimal condition for the demolition job and analysis.

• Tunnel and Underground Space
• /
• v.4 no.2
• /
• pp.87-91
• /
• 1994

팽창재와 같은 비촉성 파쇄재는 화약발파와 비교하여 볼 때 진동을 유발하지 않는다는 면에서 인접한 구조물에 영향을 주지 않고 암반을 파괴할 수 있는 장점을 갖고 있다. 비폭성 파괴방법으로 유압식 암석분할기도 팽창재와 유사한 적용성을 갖고 있으나 힘을 작용시킬수 있는 천공깊이에 제약을 갖고 있으며 규모가 큰 암반의 파괴 방법으로는 적용한계가 있다. 반면에 팽창재는 천공깊이에 큰 제약을 받지 않으며 천공수에 제한을 받지 않는다는 장점이 있다. 그러나 팽창재의 현장적용시 가장 큰 단점의 하나로 지적되고 있는 것은 파괴력을 나타내기까지의 시간이 오래 걸림으로 작업능률에 문제가 있다는 것이다. 반응시간은 물과 팽창재와의 반응률과 밀접한 관계를 갖고 있으며 본 논문에서는 팽창재의 적용성을 높이기 위하여 실시한 여러 조건하에서 팽창재 반응률 특성에 관한 연구내용을 기술한다. 연구결과를 요약하면 다음과 같다. 1)팽창재의 반응은 주위온도에 큰 영향을 받는다. 2) 팽창재의 성능을 충분히 발휘하기 위하여는 주위 온도 조건에 따라 천공직경을 적절히 조절하는 것이 필요하다. 3) 낮은 주위 온도 조건에서 팽창재의 반응은 압력이 증가하는 시간이 느리고 따라서 최대 팽창압이 높은 온도 조건에 비해서 낮게 나타난다. 4)팽창압이 증가하는 시간은 팽창재와 물과의 반응률에 좌우된다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.669-670
• /
• 2007

본 논문은 천공수 산출기법에 의해 천공수를 산출하여 크롤러드릴을 이용한 기계천공으로 1회에 필요한 깊이를 천공하고, 장약공과 무장약공을 구분하여 장약 및 전색을 하고, 지발뇌관에 의한 순차적 발파 시공방법에 관한 것으로 현장 적용시 심빼기 발파효과와 동시에 무장약공에 의한 2차 자유면을 얻는 효과로 진동, 소음, 비석을 줄이고 암반지대의 정밀한 철탑기초굴착이 가능한 기술에 관한 연구이다.

• Journal of the Society of Disaster Information
• /
• v.16 no.3
• /
• pp.449-457
• /
• 2020

Purpose: The Seoul Metropolitan Government classifies the cavity risks into emergency, priority, general, and observation grades in consideration of the cavity size, asphalt pavement thickness, and pavement depth based on the cavity management grade criteria of Seoul. In this study, the depth of cracking was measured at 17 cracks identified by checking the pavement condition of the cavity at 265 cavities found in the 2019 cavity investigation service. Method: In the first phase, crack width and depth were measured using a vernier caliper, taper gauge, and depth gauge to check the cracks of the identified cavities. In the second phase, the location of the largest crack in the upper road surface was confirmed, and A.C. was drilled to further measure the crack depth. Results: As a result, the cavity management level was raised in nine of the 17 test cavity identified. Therefore, in case of emergency and priority recovery, the grade should be adjusted according to the depth of pavement crack and the thickness of residual A.C. pavement. Conclusion: In the case of cracks in the upper part of the cavity, the crack progression must be determined through the perforation and the remaining asphalt concrete thickness must be determined to determine the cavity grade.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.9
• /
• pp.807-814
• /
• 2013

A fundamental study on laser-tissue interaction was conducted with the aim of developing a therapeutic medical device that can remove lesions on the intestinal wall by irradiating a high-power 808-nm infrared laser light incorporated in an endoscopic system. The perforation depth was linearly increased in the range of 1~4 mm in proportional to laser output (3~12 W) and irradiation time (5~20 s). We demonstrated that the perforation depth during laser irradiation was varied according to the tissue property of each extracted porcine organ. The measurement of the temperature distribution suggests that the energy is localized in the irradiation spot and transferred to deep tissue, which protects the surrounding tissue from thermal injury. These results can be used to set the driving parameters for a laser incision technique as an alternative to conventional surgical interventions.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.589-604
• /
• 2021

Waterjets for rocks have various advantages of the non-contact and eco-friendly excavation using only water and abrasive. To overcome the problems (e.g., dust and noise occurrence) of the conventional drilling methods, waterjet excavation methods are broadly used. It is advantageous to operate a couple of nozzles in order to increase the waterjet excavation efficiency. When multiple nozzles are used, it is essential to analyze the excavation performance and shape according to the nozzle operation method. In this study, nozzle angle, horizontal distance between nozzles, and standoff distance were defined as nozzle operating parameters and the excavation performance and shape were analyzed. As a result of the experiment, when the nozzle angle and standoff distance are increased, the excavation depth is decreased and the effective depth tends to be increased. In addition, based on the experimental results, the excavation shape criteria required for nozzle insertion were proposed and optimal nozzle operating parameters were derived according to the criteria. This study result is expected to be used as useful basic research in the future development of multiple waterjet nozzles for rock drilling.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.3 no.1
• /
• pp.58-63
• /
• 1989

이등분한 실의 주광율(Daylight Factor)의 비를 규제도의 지수로서 Lumen Method와 같이 정하고, 이를 만족하는 실의 깊이를 검토한 후, 설계 평균 주광율을 만족하는 창의 면적을 구하였다. 본 논문에서 제안한 창의 면적 자체가 다른 벽면의 면적 변화에 영향을 주고 있음을 고려하지 않은 종래의 방법을 개선하였다. 이후 주광율 요소 중 가장 지배적인 양인 운천공으로부터 입사하는 성분(SCo: Sky Component from overcast Sky)의 분포를 창의 위치와 형태를 변화시켜 조사, 평가하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.10
• /
• pp.1069-1077
• /
• 2015

In tunnel excavation using blast, the wire saw rock cutting method generates a discontinuity perimeter around the center cut, and thus prevents blast vibration propagation to reduce vibration and noise. Therefore, the method is expected to be easy to use and economical compared with other methods. In this paper, the cutting mechanism of wire saw in tunnel excavation is investigated. A model describing the changes in cutting depth and wire saw shape inside a rock during cutting is established and validated for this purpose. Through a simulation using the model, the important characteristics of wire saw cut are investigated, and the influences of cutting conditions, such as wire saw tension, wire saw speed, feed speed, depth, and diameter of boring, on cutting performance are also examined. A method to improve the cutting performance is proposed based on the results.

• Archives of Reconstructive Microsurgery
• /
• v.9 no.1
• /
• pp.62-67
• /
• 2000

Recently, the incidence of pressure sore has been increased, due to increased number of patients with central nervous system injuries after traffic and industrial accidents or with long term loss of consciousness due to drug intoxication. The management of sacral pressure sore has been improved through the development of myocutaneous flap. However, sacrifice of the deep muscle cause some problems such as intraoperative bleeding, functional disabilities of donor site and further limitation of reconstruction for recurrent pressure sores in paraplegic patients. The development of perforator-based island skin flap introduce a new treatment modality for sacral pressure sores. We used perforator-based island skin flap in 15 cases with reasonable result from January 1998 to February 2000. This flap has a many advantages such as no significant sacrifice of the gluteus maximus muscle, wide rotation arc, reliable blood flow of the perforator, short elevation time for the flap, and no post-operative hindrance to walking in patients who are not paraplegic. There was no significant complication without significant sequelae and donor sites could be repaired primarily.

• The Monthly Diabetes
• /
• s.212
• /
• pp.30-31
• /
• 2007

대학원생 김모씨(28세 여)는 귀에 갑작스런 통증을 느끼기 시작했다. 또 급격하게 저하된 청력으로 친구들의 말귀를 잘 못 알아들어 '사오정'이라는 별명도 얻게 되었다. 통증이 심해 병원을 찾아간 결과 외상성 고막천공이라는 진단을 받게 되었다. 이는 귀이개가 고막을 관통해 발생한 질병으로 귀이개로 귀를 후비던 중 실수고 너무 깊이 파 통증이 나타나게 된 것이다. 다행이 다른 부위는 손상이 없어 외래에서 간단한 수술 및 통원치료 후 증상은 좋아졌다. 또 직장인 박모씨(34세 남)는 어느 날부터 갑자기 귀에서 고름이 나오고, 고약한 냄새를 풍겨 병원을 찾았는데, 만성 외이도염이라는 진단을 받았다. 원인은 하루가 멀다 하고 귀지를 파내는 오래된 습관 때문이라는 것이다. 습관을 바꾸지 않으면 앞으로 청력도 떨어질 수 있다는 의사의 말에 귀이개부터 멀리하기 시작했다. 고려대 안산병원 이비인후과 조승현 교수는 "종종 속을 썩이는 것이 귀지"라며 "무리하게 후비다가는 고막까지 버릴 수 있으므로 함부로 파서는 안된다"고 지적한다.