• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.650-656
• /
• 2023

This paper implements a channel model for mmWave bands using an NS-3-based 5G system-level simulator and analyzes the reliability and validity of the implemented model through RF performance verification. The channel model for RF performance verification in the mmWave bands consider parameters such as characteristics defined in 3GPP TR 38.901, beam-forming, antenna configuration, scenarios, among others. Furthermore, the simulation results verify compliance within the ranges permitted by the 3GPP standards and verify reliability in indoor environmental scenarios by exploiting the Radio Environment Map (REM). Therefore, the channel model implemented in this study is applicable to the actual design and establishment of 5G networks, presenting a method to evaluate and validate RF performance by adjusting various parameters.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.44-53
• /
• 2006

In this paper, we propose a new Active Channel Scanning scheme by scanning active channels employed by neighbor APs' with the handover counts and non overlap channel information for fast handover. Under the proposed scheme, the mobile which has finished handover to connect a new APsends the neighbor AP's channel information learned by itself during handover to the new AP. And then, the new AP relays the neighbor channel information to the old AP. It decides a priority by handover counts and non overlap channel information for building a Neighbor Channel Table(NCT), and also sends the table information to its associated mobile nodes, periodically. As a result each mobile can scan only active neighbor APs' channels when performs handover based on the referring to NCT information. Using NS-2 Simulator, we applied to supposed ACS that the result of simulation decides to sort by handover counts and non overlap channel information. we evaluate our proposed ACS scheme based on NCT along with the full scanning scheme and the selective scanning scheme. From simulation results, we show that the proposed scheme is advantageous over the other two schemes in terms of the number of scanning channels and the scanning latency.

• Journal of Advanced Navigation Technology
• /
• v.13 no.3
• /
• pp.351-357
• /
• 2009

In this paper, we studied an efficient inter-working method in which QualNet network simulator can import WAVE channel model and physical layer simulation module pre-designed by Matlab tool. At first, we investigated physical layer and communication medium simply designed in QualNet, then we suggested practical method for QualNet network simulator to adopt different type of physical layer simulation module in which detailed multi-path fading channel model and IEEE802.11p communication modem are designed. This work should be applied to linked simulation between upper layer and lower physical layer for total simulation from higher layer to lower physical layer related to next generation DSRC/WAVE specification.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.596-599
• /
• 2008

본 연구에서는 MicroTec을 이용하여 MOSFET 전송 특성을 분석하였다. MicroTec의 Semsim은 디바이스 시뮬레이터로써 입력 바이어스에 의해 공정 시뮬레이션인 SiDif와 디바이스 조립인 MergIC에 의해 소자를 시뮬레이션 한다. 소자에 대한 스케일링은 정전압 스케일링을 사용하였고, 채널의 길이는 100nm, 50nm, 25nm로 변화하면서 비교 분석하였다. MicroTec의 이동도 모델중 Lombardi, Constant, Yamaguchi 모델을 선택하여 이동도 모델을 비교하였다. 전류-전압 특성 곡선을 비교하였을때 Lombardi 모델과 Yamaguchi 모델보다 Constant 모델에서 결과값이 높게 나타는 것을 알 수 있었다. 또한 MicroTec의 유용성을 조사하여 시뮬레이터로서 적합함과 나노구조 소자의 스케일링 이론의 적합함을 보았다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.9
• /
• pp.2107-2113
• /
• 2015

This paper proposed a Prior Forecast System of Crossroad Traffic Information that allows vulnerable road users to perceive traffic signal changes beforehand and respond in concentrated traffic areas such as crossroads. Also, it mapped out information linking procedures of the proposed system and it designed a PHY based wireless communication simulator to verify the operational feasibility of wireless communications. Conclusively, by conducting performance analysis according to crossroad channel environments using the simulator designed in this paper, it verified that a Prior Forecast System of Crossroads Traffic Information service for vehicle IT based decision-making support for vulnerable road users is a possibility.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.917-919
• /
• 2009

본 연구에서는 산화막 두께에 따른 20nm 이하 MOSFET의 전류-전압 특성 곡선 분석하였다. 산화물 내의 등가 포획 전하는 가우시안 함수를 사용하였다. 채널의 길이가 20nm 이하인 LDD MOSFET를 설계하여 사용하였고, 소자를 시뮬레이션 하기 위하여 실리콘 공정 디바이스 시뮬레이터인 MicroTec의 SemSim을 사용하였다. SemSim은 디바이스 시뮬레이터로써 입력 바이어스에 의해 공정 시뮬레이션인 SiDif와 디바이스 조립인 MergIC에 의해 소자를 시뮬레이션 한다. 산화막의 두께를 2nm, 3nm, 4nm로 시뮬레이션 한 결과 산화막의 두께가 얇아짐에 따라 드레인에 흐르는 전류가 증가함을 알 수 있었다.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.515-527
• /
• 2009

IEEE 802.11n is an ongoing next-generation WLAN(Wireless Local Area Network) standard that supports a very high-speed connection with more than 100Mb/s data throughput measured at the MAC(Medium Access Control) layer. Study trends of IEEE 802.11n show two aspects, enhanced data throughput using aggregation among packets in MAC layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PHY(Physical) layer. But, the former doesn't consider wireless channel and the latter doesn't consider aggregation among packets for reality. Therefore, this paper analyzes data throughput for IEEE 802.11n considering MAC and PHY connection. A-MPDU(Aggregation-MAC Protocol Data Unit) and A-MSDU(Aggregation-MAC Service Unit) is adapted considering multi-service in MAC layer, WLAN MIMO TGn channel using SVD(Singular Value Decomposition) is adapted considering MIMO and wireless channel in PHY layer. Consequently, Simulation results shows throughput between A-MPDU and A-MSDU. Also, We use Ns-2(Network simulator-2) for reality.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.9
• /
• pp.1551-1557
• /
• 2006

Since subscribers, who pay the same communication fees, have a strong desire to take similar services with the other users, it is an important issue to provide fairness among those subscribers wherever they are located. Therefore, in this paper we propose a QoS packet scheduler that can provide fairness among wireless LAN terminals and evaluate its performance using computer simulation. The key idea of this scheduler is to reduce the CW value of the wireless LAN terminal that has failed in sending its packets due to channel transmission error in order to offer the wireless MM terminal a higher transmission priority which is the idea of service compensation. We evaluate its performance using NS-2 network simulator, compare its numerical results to those of IEEE 802.11e without this scheme, and conclude that this scheme can reduce throughput difference between similar wireless LAN terminals.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.70-76
• /
• 2011

LTE Re1-10 aims at peak. data rates of 1Gbits/s for the downlink and 500 Mbits/s for the uplink, which can be accomplished by not only wide spectrum but also advanced MIMO techniques such as precoded MIMO and cooperative relays. Considering some relays can have more direct signal paths than mobile stations do, LoS components are examined to build more efficient codebooks for Rician channels. The proposed codebooks perform better than the existing LTE codebooks as the criterium of LoS, K-factor increases. Conserving the advantages and max-min chordal distance of the existing LTE codebooks, the proposed ones also maximize the minimum chordal distances between codewords over Rician fading channels. Link-level simulation with LTE system parameters confirm the performance improvements as the value of K increases.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.102-110
• /
• 2012

ZigBee networks developed for low power and short range communication are being used as home network solution for ubiquitous computing. However, as smart phones and tablet PCs have been widely used, WLANs which use same frequency with ZigBee networks have been increasingly used. Therefore, radio frequency interference causes many problems. To solve radio frequency interference problem among ZigBee networks and WLANs, many researches focus on designing interference minimization schemes in ZigBee networks. However, existing schemes have problems that have waste of resource for detecting interference, and have unnecessary time to avoid interference. In this paper, we propose an interference minimization scheme to solve radio frequency interference in ZigBee networks. The proposed scheme detects interference using ACK mechanism to reduce waste of resource, and avoids interference using table driven channel hopping scheme which is faster than existed schemes. The performance of proposed interference minimization scheme is evaluated by using OPNET simulator. Through the simulation result, we prove that proposed scheme has faster channel hopping than existing schemes.