• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.160-165
• /
• 2005

Since the growth and quality of oak mushrooms are sensitively affected by environmental conditions, an adequate environmental control is very essential to improve the yield and quality under protected cultivation. In this study, the diameter, thickness, length and hardness of cap and stipe, the dry weight, fresh weight and moisture content of the mushrooms were analyzed under the environmental conditions such as night air temperatures (control, $5{\~}11^{\circ}C$ and $12{\~}18^{\circ}C$), relative humidities in the daytime (control, humidifying for 6 h and 12 h), and wind velocities (control, fan-operation for 6 h and 12 h). At a lower night temperature, the quality of the mushrooms was improved, and considered to be optimum at $3{\~}8^{\circ}C$ in terms of fresh weight and quality. At $70{\~}80{\%}$ of relative humidity in the daytime, the fresh weight was increased, but the quality decreased. Considering the quality, the relative humidity in the daytime is adequate at around $50{\%}$. At 6 h of maintaining the wind velocity at $1{\~}2\;my{\cdot}s^{-1}$, the growth and quality were better, but the lightness became higher at 12 h although the fresh weight was reduced by evaporation. It is concluded that even though both of the yield and quality are not easily improved at a same time, optimum approaches should be required by using the relationship among environmental factors and the growth and quality.

• Journal of dental hygiene science
• /
• v.15 no.5
• /
• pp.577-584
• /
• 2015

The purpose of this study was to evaluate the effect of metal chloride infiltration treatment on color and strength changes of the yttria-stabilized tetragonal zirconia polycrystals (Y-TZP). Fifty disc specimens were prepared with a Y-TZP powder (ZPEX; Tosoh, Japan). Thirty different metal chloride solutions containing 0.03~0.08 wt% chromium and 0.03~0.07 wt% terbium ions were prepared. Presintered Y-TZP specimens were soaked in metal chloride coloring liquids for 3 minutes and sintered in air at $1,450^{\circ}C$ for 2 hours. The color of the specimens was measured with spectrophotometer and color difference (${\Delta}E^*$) was obtained based on the CIE $L^*$, $a^*$, $b^*$ color coordinate values. To evaluate the effect of metal chloride infiltration strength changes, the biaxial flexural test was performed at crosshead speed 0.5 mm/min. Colors of the sintered Y-TZP showed the colors of Vita shade guide A1, A2 and A3 with the infiltration of chromium and terbium chloride solutions. Density of the sintered Y-TZP increased by the infiltration of chromium and terbium chloride solutions. Bi-axial flexural strength of the sintered Y-TZP did not show statistically significant differences by the infiltration of chromium and terbium chloride solutions (p>0.05). Chromium and terbium chloride did not affect the crystal phase of zirconia, and all specimens showed tetragonal phase. Accordingly, this study suggests that chromium and terbium chlorides can make colored zirconia while adding in a liquid form. The color of colored zirconia differ from that of vita shade guide but it can use all ceramic restoration as substructure in dental clinic.

• Horticultural Science & Technology
• /
• v.32 no.4
• /
• pp.454-462
• /
• 2014

This study was carried out to determine the effect of tree height on light transmission, spray penetration, tree growth performance, fruit quality attributes, and labor productivity in the slender-spindle system of 'Hongro'/M.9 apple trees. With increasing tree height, the light penetration into the internal parts of the canopy decreased, especially in the lower canopy. Leaf area index (LAI) increased with increasing tree height, thereby leading to a reduction in the extent of spray penetration into the interior of the canopy. With increasing tree height, shoot growth was more vigorous but produced slender shoots in the upper canopy compared to the lower canopy. Although the soluble solid content and coloration of fruit decreased, there was no difference in fruit firmness and acidity. In addition, the number of final fruit set increased, although the production of large fruit (> 305 g) decreased. The increase in tree height also significantly increased the labor required for practices such as thinning of flowers and fruits, pruning, and harvesting. Nevertheless, this problem of increased in labor input in taller trees would was eased by use of a mechanical lift. Utilizing a lift for thinning the flowers of trees 4.5 m in height saved 14.6 min per tree, compared to the use of ladder. Therefore, it is highly considerable that in order to enhance light transmission and fruit coloration, light conditions should be improved in the internal tree canopy of slender-spindle systems.

• Korean Journal of Food Science and Technology
• /
• v.11 no.3
• /
• pp.162-165
• /
• 1979

In order to study the red-coloring effects of hot pepper fruit by light treatment during after-ripening period, 'Karak Geumjang No. 2 green hot pepper fruits, Capsicum annuum L., after 30 to 35 days from flowering were harvested and white, red and blue light treatments at the energy level of $40\;{\mu}watt/cm^2/sec$ were given at $25^{\circ}C$. When compared with white light, total chlorophyll content was strikingly decreased by blue light treatment and no difference in the chlorophyll contents between red and white light was observed. The chlorophyll a and b showed a similar decreasing patterns as shown in the case of total chlorophyll. Total carotenoid content was higher in the blue light treatment by 31% than the white light. However, red light decreased the carotenoid condent as compared to the white light treatment. But ${\beta}-carotene$ was not changed by red light as compared to white light. Blue light treatment increased ${\beta}-carotene$ content (0.71 mg%-f.w.) as compared to white light treatment (0.56 mg%-f.w.). Therefore, blue light treatment increased red-coloring responses of hot pepper fruit during after-ripening period. The capsaicin content was slightly increased by blue light and no red light influence was observed.

• Clinical and Experimental Pediatrics
• /
• v.49 no.5
• /
• pp.482-488
• /
• 2006

Purpose : To evaluate the factors which contribute to the time of the first stool and the first urine passage. Methods : We retrospectively reviewed a chart of 1,221 infants ${\geq}34$ weeks of gestational age admitted to the normal newborn nursery of Il Sin Christian Hospital, Busan, from November 2004 to April 2005. We compared the time to first stool and urine according to maternal factors(maternal age, parity, mode of delivery, meconium-stained amniotic fluid, and maternal diabetes) and infant factors (gender, Apgar score, gestational age, type of feeding during first 24 hours, age at the first feeding, number of feeds during the first 12 hours and age at discharge). Results : In total, 95.3 percent of our infants had passed their first stool by 24 hours and 99.8 percent of them had a stool by 36 hours. A total of 95.8 percent of our infants had passed urine by 24 hours of age and 98.3 percent of them by 36 hours. Comparing preterm and term infants, the time to first urine is $6.5{\pm}5.8$ hours and $12.1{\pm}6.6$ hours, respectively(P=0.000). The time to first stool is $20.7{\pm}13.5$ hours and $10.0{\pm}6.3$ hours, respectively(P=0.000) Early-fed infants were significantly earlier in time to first urine(P=0.023) and first stool(P=0.012). There was no statistically significant relationship between the number of feeds in 0-12 hours, mode of delivery, Apgar score, parity, gender, type of feeding, maternal diabetes and the time of the first urine and first stool. Conclusion : Gestational age, birth weight and age at first feeding were significantly related to the time of the first urine and first stool passage. When there is delayed passage of the first urine and first stool, we should consider close observation of other associated symptoms and other factors previously mentioned, to avoid extensive evaluation and intervention.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.1
• /
• pp.27-35
• /
• 2012

Purpose: The present study was conducted to compare any difference caused by pigmentation in the centrations and movement patterns on the cornea between circle and soft contact lens with identical material and parameters during lens wearing. Methods: Soft and circle contact lenses with identical material and parameters were applied to twenty eyes with normal tear volume for 3 hrs a day during a total of 5 days and then their lens centrations, the moving distances and rotations by repeat blinking were compared. Results: The lens centration beyond the fitting criteria was shown in initial wears of both soft contact lens and circle contact lens. However, the centration of soft contact lens was changed to the pupil center for being suitable to the fitting criteria with longer wearing time. On the other hand, the decentration of circle contact lens in the horizontal direction was still presented even with longer wearing time. The moving distances of soft contact lens and circle contact lens decreased with the expand of lens wearing but were not significantly different between total wearing period and daily wearing time. The rotation of circle contact lens by repeat blinking was significantly different from that of soft contact lens even when the wearing period was extended. Conclusions: We revealed that the lens centration and movement of circle contact lens on cornea were different from those of regular soft contact lens resulting in bigger difference with the expand of wearing period in the study.

• Korean journal of applied entomology
• /
• v.4
• /
• pp.19-24
• /
• 1965

In an attempt to find a satisfactory environmental factors which facilitate abundant conidial production of Piriculariaoryzae Cav. on tomato juice media, various environmental factors were studied for their effect on sporulation and mycelial growth of the fungus. Those factors were conditions of irradiation, color of light, age of culture and pH of the media. l) Continuous exposure to fluorescent light (Mitsubish FL-20-35 W) produced more conidia and much mycelial growth than did intermittent photoperiods and darkness. 2) Of 3 cellophane filters and direct exposure to fluorescent light used, conidia were produced best under the direct exposure to the light. Conidial production in color filter conditions sequently decreased with red, yellow and blue. Growth of mycelium was not significantly different within colors. 3) Periodic irradiation of 12-hour unit brought about zones on mycelial growth no matter what the color filter was used. 4) Older cultures responding to the light were more stimulated by light than were the younger one in the conidia production, but maximum production of conidia was 48 hours of age in this case. 5) Color of the mycelial mat and the aerial mycelium seemed to have a close relation to the production of conidia. The more darkness of the mycelial mat was produced the more conidia and the much aerial mycelium was produced the least conidia. The color of mycelium was more dark under the continuous irradiation than continuous darkness, while the periodic irradiation showed intermediate effect. 6) The concentration of hydrogen ion for growth and sporulation of the fungus was investigated the ranges between 5 and 9. The best pH for the fungus was also noted at 7. whereas the below of pH 4 was not occurred any mycelial growth and sporulation.

• Current Research on Agriculture and Life Sciences
• /
• v.31 no.1
• /
• pp.56-60
• /
• 2013

This research was carried out to produce rainbow-colored roses from white cut rose, Rosa hybrida 'Denice', to meet customers' desire of having various colors of roses. The higher temperature of dyeing solution used, the faster coloring time surveyed. In high temperature, the flowering speed of cut flower accelerated and after treating more than 4 hours, the edges of flowers became too dark or dry. In the condition of concentration of dyeing solution, $11g{\cdot}L^{-1}$ dyed faster than $7.5g{\cdot}L^{-1}$, however, no differences between $15g{\cdot}L^{-1}$ and $11g{\cdot}L^{-1}$ have observed. It looked fast coloration at the stage of early blooming, but all three different petal opening stages need similar time to get even coloration from outer to inner petals. For the consideration of commercial value, flowers with 3-4 petals opened are better quality than flowers with less petals opened. It was possible to make rainbow-colored rose by dipping 'Denice' with 3 primary color combination, Hot Pink, True Blue, and Yellow dyes, at the best result conditions of $20^{\circ}C$ solution temperature, 3-4 petals opening stage, 11g/L concentration of dye solution and 3 hours dipping, respectively.

• Journal of dental hygiene science
• /
• v.16 no.6
• /
• pp.442-448
• /
• 2016

Dental caries and periodontal disease are considered to be chronic, but can be prevented through an incremental oral health program covering all ages. The National Oral Health Program for adults provides oral health exam and scaling, and is covered by national health insurance for those over 20 years of age in Korea. The aim of this study was to collect basic data for developing an oral health program for adults by identifying factors related to awareness and need. The data were obtained by convenience sampling of 303 subjects. The use of dental plaque disclosing agents affected tooth brushing frequency, toothbrushing time and use of oral auxiliary devices. Education on toothbrushing methods affected toothbrushing time and use of oral auxiliary devices. Of those surveyed, 93.1% replied that an incremental oral health program for adults was needed, and 68.0% intended to participate. In a regression model, the factors that had an effect on the perceived need for an oral health program were education level, use of oral hygiene auxiliary devices, and toothbrushing time, and the factors affecting intent to participate were education for prevention of periodontal disease and the use of oral hygiene auxiliary devices. The subjects stated that the following oral health programs were needed: an oral bacteria exam (74.3%), toothbrushing education (71.6%), a bad breath exam (69.3%), education on use of oral hygiene auxiliary devices (46.9%), a dental plaque exam (42.9%) and a saliva exam (37.6%). Oral health education appears to be an important factor for participation in an incremental oral health program.

• Clinical and Experimental Pediatrics
• /
• v.46 no.7
• /
• pp.710-713
• /
• 2003

Purpose : Although chloramphenicol and doxycycline have been used for the treatment of tsutsugamuchi disease, a difficulty exists in determining which drugs to use in treating children because of potential complications such as aplastic anemia or teeth discoloration. We evaluated the effect of roxithromycin, a macrolide antibiotic, on tsutsugamushi disease in children. Methods : A retrospective analysis was conducted on 39 children with tsutsugamuchi disease(scrub typhus) who were treated with doxycycline(DC), chloramphenicol(CM), or roxythromycin(RM) between 1991 and 2000. We divided the patients into a DC-treated group(DC group; 16 children), a CM-treated group(CM group; 14 children), and RM-treated group(RM group; 9 children) and compared these groups. Results : Most cases(97%) developed in October and November. Fever and rash were observed in all 39 cases and an eschar was noted in 36 cases(92%). No statistical differences could be found between the three groups in mean age, duration of fever before admission, white blood cell(WBC) count, and complications including abnormal liver enzymes. In most cases defervescence after treatment was within 24 hours(34 cases, 87%), and during 24-48 hours in two cases in the DC group, one in the CM group, and two in the RM group(no statistical difference). Conclusion : Roxythromycin was as effective as conventional doxycycline or chloramphenicol, in children with scrub typhus and may be safer to use.