• Journal of Korean Society of Transportation
• /
• v.31 no.1
• /
• pp.37-46
• /
• 2013

Lane closure in freeway work zone due to maintenance and repair of freeway facilities results in abrupt change of traffic flow. Sudden change of traffic flow results strong interactions among vehicles, and reduces capacity compared to the ordinary traffic condition. Such capacity reduction is likely to cause congestion, traffic queues, and economic loss cost. This study aims to determine the base capacity for a short-term freeway work zone that can be used to establish a work zone schedule in advance without any traffic impact. First, the research collected detector data and schedule data of road works on all freeways in Korea. Second, the research determined 23 study sites finding the capacity values of work zone after matching two kinds of data. All study sites had varying characteristics regarding traffic flow being adjacent to work zone during road works. The capacity values were reviewed in terms of lane closure configuration, the types of work, and design speed. Finally, research proposed capacity values for a short-term freeway work zone with the design speeds of 100 kph, 120 kph and 1,700 pcphpl, 1,750 pcphpl, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.4
• /
• pp.1-9
• /
• 2012

This study deals with the operation effectiveness of roundabout. The objective of this study was to analyze the operational effectiveness of roundabout based on the operation of pedestrian signal. For pursuing the above, VISSIM was as a traffic simulation program. this study gives particular attention to analyzing the 1,680 scenarios by operation of Pedestrian Signal(7 cases), roundabout type(2 cases), pedestrian volume(8 cases) and entering volume(15 cases). The main results analyzed are as follows. First, the operational effectiveness analyzed by 2 type of 4-legged 1-lane roundabout and 6 type of 4-legged 2-lane were evaluated to be better than that by the others type. Second, the average delay time analyzed by operation of pedestrian signal were evaluated to be less than that by unsignalized pedestrian crossing. Finally, the average delay time analyzed by pedestrian crossing were decreased 8.18% than that by staggered pedestrian crossing in 4-legged 1-lane. However, the average delay time analyzed by staggered pedestrian crossing were evaluated to be decreased 36.53% than that by pedestrian crossing in 4-legged 2-lane.

• Journal of Korean Society of Transportation
• /
• v.28 no.2
• /
• pp.21-32
• /
• 2010

A traffic island, typical channelization facilities, is widely applied to newly road designs and black spots improvement projects as traffic safety measures. However positive effects of a traffic island for traffic safety have not been reported specifically. Accordingly this study analyzed the accidents reduction effectiveness and economics of installing traffic islands under various roadways and traffic conditions. For this purpose normality test, paired t-test and Wilcoxon signed rank test were applied to this study based on traffic accidents, roadways and traffic environments data for 3 years before and after improvement at 54 intersections. The results showed that most of traffic accidents were reduced significantly after installing traffic islands except when traffic islands were installed in outside of cities and farming regions where use efficiency is low, curve sections with poor visibility, poor alignment sections with acceleration/deceleration lanes, road sections where occurs conflicts frequently due to did not install of acceleration/deceleration lanes, and road sections where cross with single lane road.

• Journal of Korean Society of Transportation
• /
• v.24 no.2 s.88
• /
• pp.113-124
• /
• 2006

Among tile traffic safety facilities, median barriers are installed above 4-lane national roads due to the awareness of haying an effect on preventing the front collision. Studies about the installation effect analysis of median harrier have been carried out through both at home and outside, mainly indicating total accident reduction effect on pertinent sections. In sum, study about how the accident occurrence form is changed at the point classified by the accident type or severity is insignificant. In the case of outside the country, calculating the accident reduction effect according to the type of median barriers is main research and in domestic, though there is a part of researches assessing reduction effect by accident types, it is not reliable in the view or statistics because of using only 1year's before-aftev data installing the facility, So in this Paper. it is the main purpose to presume the accident conversion effect. For this, we conduct an investigation and collect data about 7-year's accident data containing before-after Project, safety facilities foundation records and index of road alignment on the subject of 4-1ane national roads(108.6km) existing median barrier. Next. using the empirical bayes method, we estimate a model construction and accident conversion effect of accident type severity. We expect the result or this Paper will be applied for a policy execution and Presentation of facility standard related to median barrier from now on.

• Journal of Korean Society of Transportation
• /
• v.34 no.4
• /
• pp.354-372
• /
• 2016

This study identified factors affecting the crash severity at freeway work zones. A nice feature of this study was to take into account the characteristics of work zone traffic management in analyzing traffic safety concerns. In addition to crash records, vehicle detection systems (VDS) data and work zone historical data were used for establishing a dataset to be used for statistical analyses based on an ordered probit model. A total of six safety improvement strategies for freeway work zones, including traffic merging method, guidance information provision, speed management, warning information systems, traffic safety facility, and monitoring of effectiveness for countermeasures, were also proposed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.925-932
• /
• 2018

This study deals with Turbo-Roundabout of Special-Roundabouts. Recently, many rotary intersections are being constructed in Korea, but the effect of the rotary intersection depends on the total entrance traffic volume and the area of the paper. The purpose of this study is to analyze the operation and accident reduction effect of turning traffic signal intersection with small traffic volume into turbo - type turning intersection. The main results are as follows. First, when the traffic volume of the main road is high, the traffic volume of the subway is less than 10 ~ 15%, or when the left turn ratio is less than 30%, it is improved when switching to the turbo type turn intersection instead of the first turn type and second turn type turn intersection Was analyzed. Second, it is considered that turbo type rotary intersection is more effective than first - type rotary intersection, and it is more effective in increasing road capacity because the area of paper is smaller than that of second - order rotary intersection. Third, the number of traffic accidents decreased by 45.9% and the number of injured persons decreased by 76.5% after the conversion of the turnover type turnover to turbo type. 100%), the number of car accidents was 0.3, and the number of casualties was 0 (100%). Finally, the positive evaluation of the user satisfaction survey showed that the improvement in safety, accessibility, and convenience was improved by 60.4%, which was improved by 16.4% to 76.8% after the conversion to the turbo type turnover.

• Journal of Korean Society of Transportation
• /
• v.33 no.1
• /
• pp.81-89
• /
• 2015

Crashes that occur at tollgates have different characteristics compared to those of the mainline on expressways in terms of crash cause, crash type, and vehicle type. Due to this fact, the safety performance function (SPF) focused on the expressway tollgates, apart from the mainline, should be developed. The aim of this study is, therefore, to identify the influential factors and develope a SPF for crashes at tollgates. Firstly, we established independent variables affecting crashes at tollgates through literature review and descriptive statistical analysis. Based on these variables, two negative binomial regression models with different form of independent variables were developed and goodness-of-fits of each model were compared. According to the results, the number of crashes increases i) as AADT, Hi-pass rate, and heavy vehicle rate increase, ii) as average lane width decreases, iii) on the mainline tollgate type. The safety performance function developed in this study could be applied to select hot-spots for expressway tollgates.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.96-109
• /
• 2019

Roundabouts are actively installed to reduce unnecessary congestion and reduce traffic accidents. However, it is difficult to apply more than 450 cars per, hour. In addition, there is a downside to the concentration of delays in certain directions depending on traffic conditions. To compensate for these shortcomings, signal metering was introduced. Signal metering is a technique that gives red signals to adjacent left traffic flow in the event of a delay in a particular direction. The purpose of this study is comparing the effect of signal metering in conventional and special types (turbo roundabout, flower roundabout) of roundabout. VISSIM API is used for analysis. The analysis result show that only conventional roundabout signal metering algorithm reduce delay time per vehicle. As the result of the turbo roundabout and flower roundabout signal metering algorithm increase delay time per vehicle, signal metering algorithm can be applied in conventional roundabout.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.3
• /
• pp.17-28
• /
• 2024

In this study, the capacity of the tunnel and the general section was calculated and compared using the VDS detector data, and the decrease rate in capacity of the tunnel section was analyzed by tunnel type. To compare the capacity of the tunnel and the general section, the Product Limit Method (PLM) was applied to the VDS detector data. As a result of comparing the capacity of the tunnel and general section, the capacity of the tunnel section decreased by about 6.5% compared to the general section. To classify the tunnel type, the tunnel extension and the number of lanes were used as variables, and there was a difference in the decrease rate of capacity by tunnel group classified by each criterion.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.117-125
• /
• 2008

Recently, users of bicycles as a green mode are rising sharply, but there are few efforts to increase bicycle safety and to decrease the number of accidents between vehicles and bicycle users. Therefore, this research seeks to improve bicycle safety at intersections by analysing causation factors of bicycle accidents pattern and providing optimal intersection design guidelines. For this study, real bicycle accident data of fifty six occurred in the Incheon metropolitan area in the year of 2005 were collected and field surveys were conducted. In addition, this research developed a bicycle accident pattern model with using multinomial logit model. The model results showed that presence of fatality, presence of traffic islands on the minor road, highway_type, weather, presence of traffic bus_stop on the major road, minor road lane width, victim induce factor are significant for bicycle safety.