• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.12a
• /
• pp.60-65
• /
• 2004

최근 무선/이동 통신 기술과 GPS 기술의 발달은 휴대폰을 소지하고 이동하는 사람이나 GPS 수신기를 탑재한 차량과 같은 이동객체의 위치 정보와 관련된 서비스의 제공을 가능하게 하였다. 이러한 환경에서 연속적으로 변경되는 이동객체의 위치 정보는 데이터베이스에 빈번한 갱신 연산을 요구하게 되고, 이는 전체 시스템의 성능을 저하시키는 원인이 된다. 이러한 문제를 해결하기 위하여 R-Tree와 같은 공간색인 구조를 확장하여 갱신 효율을 높이기 위한 연구가 진행되어 왔지만, 시스템의 전체 성능은 오히려 저하되는 문제를 가져왔다. 이 논문에서는 이동객체의 질의 처리 성능뿐만 아니라 객체의 빈번한 위치 갱신을 효율적으로 처리할 수 있는 방법으로 고정 그리드와 R-Tree를 혼합한 형태의 색인 기법을 제안한다. 제안된 색인 기법은 R-Tree에서 색인의 재조직화로 인해 갱신 성능이 저하되는 문제를 해결하기 위하여 셀 기반 색인 기법인 고정 그리드를 이용하여 이동객체의 위치 정보를 저장하고, 고정 그리드에서 객체의 편중 분포로 인한 오버플로 문제를 처리하기 위하여 오버플로가 발생한 각각의 셀들을 R-Tree로 관리한다. 또한, 객체의 밀도가 낮은 셀들을 하나의 버켓으로 공유하여 관리함으로써 저장 공간을 효율적으로 활용한다. 제안된 방법을 다양한 평가 요소를 통해 실험한 결과, 기존의 R-Tree보다 뛰어난 갱신 성능을 보였으며, 질의 처리에 대해서도 성능이 향상되었음을 보였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.1 no.1
• /
• pp.79-88
• /
• 2002

As a part of NERI:;, Truck Shipment Safety Information is divided into Optimal Route Guidance system and Emergency Response system. This study which is for developing of Truck Shipment Incident Emergency Response System intends to prevent or early response damage caused by incidents through realtime monitoring about the position and the state of Hazard material transport truck. For this, we divide it into three scenarios; realtime monitoring, management of incidents, information provision to related organizations and present functional requirements and architecture coming with each scenario. As a result of the first step among total three steps, it would able to not only realtime management of trucks but also guide for auto-enforcement or management about illegal act like dumping scrapped material. It is now under examination about position of detection and technology of communication to application. From now on, it is expect to test in the range of Metropolitan after selecting appropriate technology.

• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.138-146
• /
• 2024

Purpose: The purpose of this study is to find cases of using information and communication technology and smart mobility technology in snow removal vehicles and equipment for rapid and efficient road snow removal in the event of a snowstorm, and to find ways to utilize them. Method: Cases of domestic and overseas snow removal methods are investigated, and snow removal operation methods incorporating new technologies are presented. Result: Most of the operation of snow removal equipment in Korea uses GPS, CCTV, and road traffic information systems, and in the case of overseas, road weather information systems and road snow removal monitoring systems are used. It is expected that snow removal technology using autonomous snow removal vehicles, which are smart mobility, will be developed in the future. Conclusion: The results of this study can contribute to the policy of using snow removal equipment and snow removal vehicles of local governments and related organizations.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.1 s.12
• /
• pp.13-26
• /
• 2007

A VDS data in the domestic has been used within limits to real time information such as congestion management, incident management, and route guidance service. On the other hand, a VDS data in the foreign countries had been used to various objectives such as transportation policy assessment, transportation construction evaluation, franc safety improvement, and etc. The scope and method of the study is the VDS data which was installed in the uninterrupted flow such as the freeway and the interrupted flow in a diversion route of the leeway. It has investigated and analyzed the VDS as our subject to study, study objective and study methodology for each study generally classified as 1) data collection 2) data processing 3) data store and 4) data quality section. This study has investigated and analyzed the various literatures in domestic and foreign countries regarding the VDS data. And It drew the development direction of the study which is about VDS data in domestic from now.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.1-14
• /
• 2012

Traffic management centers (TMC) collect real-time traffic data from the field and have powerful databases for analysing, recording, and archiving the data. Recent advanced sensor and communication technologies have been widely applied to intelligent transportation systems (ITS). Regarding sensors, various in-vehicle sensors, in addition to global positioning system (GPS) receiver, are capable of providing high resolution data representing vehicle maneuverings. Regarding communication technologies, advanced wireless communication technologies including vehicle-to-vehicle (V2V) and vehicle-to-vehicle infrastructure (V2I), which are generally referred to as V2X, have been widely used for traffic information and operations (references). The V2X environment considers the transportation system as a network in which each element, such as the vehicles, infrastructure, and drivers, communicates and reacts systematically to acquire information without any time and/or place restrictions. This study is motivated by needs of exploiting aforementioned cutting-edge technologies for developing smarter transportation services. The proposed system has been implemented in the field and discussed in this study. The proposed system is expected to be used effectively to support the development of various traffic information control strategies for the purpose of enhancing traffic safety on highways.

• KIISE Transactions on Computing Practices
• /
• v.22 no.4
• /
• pp.189-194
• /
• 2016

A trajectory is the motion path of a moving object. The advances in IT have made it possible to collect an immeasurable amount of various type of trajectory data from a moving object using location detection devices like GPS. The trajectories of moving objects are widely used in many different fields of research, including the geographic information system (GIS) field. In the GIS field, several attempts have been made to automatically generate digital maps of roads by using the vehicle trajectory data. To achieve this goal, the method to cluster the trajectories on the same road is needed. Usually, the $Fr{\acute{e}}chet$ distance measure is used to calculate the distance between a pair of trajectories. However, the $Fr{\acute{e}}chet$ distance measure requires prolonged calculation time for a large amount of trajectories. In this paper, we presented a fast heuristic algorithm to distinguish whether the trajectories are in close distance or not using the discrete $Fr{\acute{e}}chet$ distance measure. This algorithm trades the accuracy of the resulting distance with decreased calculation time. By experiments, we showed that the algorithm could distinguish between the trajectory within 10 meters and the distant trajectory with 95% accuracy and, at worst, 65% of calculation reduction, as compared with the discrete $Fr{\acute{e}}chet$ distance.

• Journal of Korean Society of Transportation
• /
• v.35 no.5
• /
• pp.423-433
• /
• 2017

During recent 5 years, it was recorded that 20% of total accident frequency and 30% of total number of death have been occurred due to drowsy driving. Drowsy driving accident is result from the loss of driving ability due to driver's accumulated fatigue. Continuous driving time can be measured as a surrogate variable to quantify the level of fatigue. The main purpose of this research is to investigate statistical correlation between the proportion of continuous driving vehicle (more than 2 hours) and the number of drowsy accidents. To carry this out, continuous driving time was measured using GPS route-guidance trajectory data. Also, accident frequency, traffic volume and segment length were collected to estimate safety performance function (SPF) for Jungbunearuk expressway in Korea. Through various types of estimated SPFs, statistical correlation was analyzed based on estimated statistical indices. This research can provide theoretical background for enforcement to regulate commercial vehicle driver's continuous driving time. In addition, throughout the trajectory data expansion, it is expected that strategy for anti-drowsy driving facilities installation can be established based on the suggested methodology.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.560-565
• /
• 2002

In this paper, we implemented the sign board system that displays user's image, user's sentence, the information from DARC an[1 information based position by GPS module for vehicle. The existing sign board is displaying only user's image and sentence. Or other existing sign board is displaying the information via CDMA network. However, our system is also able to display the user's message like other system and gain the information more cheap by DARC. This system consists of 6 parts. The DARC control part classes the DARC information - news, weather, stock and time. The GPS control part gains moment and item to display with calculating the information of global position, direction, speed and satellite. The LED control part has two buffers to store and handle the image. The buffers help the system display various effected images on LED board. An external memory card includes the location based data, the option file and the displayed data files. The data files are stored by FAT 16 with the folder structure on external memory card. The USB controls the communication with PC. PC programs can control and monitor this system. This system is using G72l voice file format, for casting the information. This system was established at the vehicle and we monitored this system. The system displayed the DARC data , user's data and the location based data on the LED board, successfully.

• Journal of Digital Convergence
• /
• v.17 no.11
• /
• pp.207-213
• /
• 2019

The fuel-cut coast-down driving mode is activated when the acceleration pedal is released with transmission gear engaged, and it's a default function for electronic-controlled engine of vehicles. The fuel economy becomes better because fuel injection stops during fuel-cut driving mode. A fuel-cut detection method is suggested in the study and it's based on the speed, acceleration and road gradient data from GPS sensor. It detects fuel-cut driving mode by comparing calculated acceleration and realtime acceleration value. The one is estimated with driving resistance in the condition of fuel-cut driving and the other is from GPS sensor. The detection accuracy is about 80% when the method is verified with road driving data. The result is estimated with 9,600 data set of vehicle speed, acceleration, fuel consumption and road gradient from test driving on the road of 12km during 16 minutes, and the road slope is rather high. It's easy to detect fuel-cut without injector signal obtained by connecting wire. The detection error is from the fact that the variation range of speed, acceleration and road gradient data, used for road resistance force, is larger than the value of fuel consumption data.

• Journal of Advanced Navigation Technology
• /
• v.21 no.4
• /
• pp.325-331
• /
• 2017

As a GPS stability problem arises, MLAT system is spotlighted as an alternative technology of ADS-B. MLAT system has a high position accuracy as much as ADS-B. Also, MLAT receives the mode A,C,S, and 1090ES(ADS-B) signals from the mounted aircraft transponder. MLAT receives signals from several receiver units and calculates aircraft positions. MLAT has ADS-B level positioning accurarcy using GPS and can calculate the position information with objects independently. According to global environment changes, Local area multiltilateration(LAM) surveillance system is under development for moving vehicles and aircraft detection in airport. These are still under testing in Tae-an Airfield. In the paper, we analyzed the performance by comparing the calculated position data from MLAT to RTK. In order to confirm the position accuracy of MLAT and the deviation of position data between fixed target and moving target on the ground during the field test in Tae-an Airfield.