• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.702-703
• /
• 2013

본 논문은 차량 추돌 예방 레이더용 24GHz 전압제어발진기를 제안한다. 이러한 회로는 TSMC $0.13{\mu}m$ 혼성신호/고주파 CMOS 공정($f_T/f_{MAX}=120/140GHz$)으로 설계되어 있다. 이러한 회로는 스위치형 공진기 (switched resonator)의 기본 구조를 지닌 24GHz 주파수 대역을 사용할 수 있도록 CMOS LC 튜닝 회로를 포함하고 있다. 특히 전체 칩 면적을 줄이기 위해 수동형 인덕터 대신 능동형 인덕터부를 사용하였다. 본 연구에서 개발한 발진기는 전체 튜닝 범위에 대해 24GHz에서 8%의 측정 결과를 보였으며, 600kHz 오프셋에서 24GHz에 대해 약 -89dBc/Hz의 우수한 위상 잡음 특성을 보였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.160-163
• /
• 2021

최근 국내 전동킥보드 공유서비스의 증가 추세에 따라 전동킥보드와 보행자 혹은 차량과의 충돌사고가 증가하고 있다. 이러한 충돌사고로 인한 사고를 예방하기 위해 본 논문에서는 영상처리 기술에 기반한 후방위험요소 감지 시스템을 제안한다. 제안 시스템은 전동킥보드 사용자의 안전 헬멧에 라즈베리파이와 파이캠을 장착하여 가까이 오는 보행자나 차량을 영상처리 기법을 활용하여 인식하도록 하여 이들과의 충돌을 사전에 방지하도록 해준다. 제안 시스템의 정확도를 파악하기 위해 입력영상의 해상도별 처리속도와 정확도를 비교한다. 아울러, 제안 시스템을 안전 헬멧에 장착하여 테스트필드 실험을 통해 실제 환경에서 사용가능 여부를 검증한다.

• Computational Structural Engineering
• /
• v.7 no.2
• /
• pp.89-99
• /
• 1994

The nonlinear dynamic behaviors of guardrail established on the local or high way have been investigated using BARRIER VII program with respect to four design variables such as section type of beams and posts, impact angle, impact velocity and vehicle weight. Computer simulation programs are sophisticated analytical models for analyzing dynamic vehicle/barrier interactions and provide a relatively inexpensive alternative to full scale crash testing. This study has been focused on the structural adequacy, occupant risk, and vehicle trajectory. For this purpose, the maximum defection and impact force have been calculated to design the clear zone and to analyze effect of impact attenuation. Also, the acceleration of vehicle and exit angle after collision have been computed to estimate the occupant risk. From this study, it is suggested that we should strengthen the design criteria of guardrail to prevent from disastrous traffic accidents.

• Journal of Digital Convergence
• /
• v.10 no.6
• /
• pp.225-230
• /
• 2012

When a car accident happened, the accident vehicle should broadcast a safe message to its neighbors in multi-hop. However, the pure flooding is difficult to protect a chain-reaction collision because of the frequent collision and the communication delay. To solve this problem, we proposes a back-off algorithm applied to the estimation of the neighbor node count using the t-distribution. And we proposes a MAC protocol preventing the communication delay by separating the neighbor's count collection channel and data channel. As a result, we show the frame reception success rate of our protocol improved more 10% than the previous protocol.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.603-604
• /
• 2021

It is a enforcement system to prevent collisions caused by unmanageable parking that may occur in parking lots. There are handicapped people who can get up in parking lots, general vehicles parked in electric vehicle parking areas, and vehicles parked in two lanes. The vehicle above is detected and notified through the deep learning object recognition function. By using a picture or video of an unmanageable parking situation as learning data, the learning data is produced so that the situation can be recognized, and the situation is recognized to determine the presence or absence of unmanageable parking. The purpose is to reduce collisions between parking lot users by making the environment of the parking lot more comfortable.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.414-415
• /
• 2022

In this paper, we are going to develop a collision accident prevention technology that automatically recognizes more than 98% of workers and obstacles in 360° around them during work/high-speed movement/cabin rotation, guides collision warning and secures the driver's viewing angle.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.60-68
• /
• 2006

Using the wireless communication among unacquainted vehicles, an intelligent vehicle safety system can be constructed to exchange vehicle safety-related information, such as urgency stop, traffic accident and road obstacles. In the majority of vehicle safety applications, vehicle safety messages are propagated in the form of broadcast. However, this approach causes some effectiveness and performance problems with massive radio collision, multi-hop propagation. This paper presents a priority based relay node selection method for propagating vehicle safety messages of traffic accident protection system. With this method, vehicle safety messages are relayed by a node that locates in proper distance out of the nodes that are included in the radio transmission range. By decreasing the number of duplicated messages, the packet overhead is lessened while the communication performance is raised. The proposed method was proven to be better than other schemes through network simulations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.329-332
• /
• 2015

야간에 자동차를 운행할 때 검정색 차량 같은 어두운 색상의 자동차는 운전자가 인지를 못하는 경우가 많고 안개가 짙게 낀 상황도 운전자의 시야가 좁아져 교통사고율이 급격하게 증가한다. 도로교통공단의 자료에 의하면 최근 5년(2009~2013) 동안 가해자의 안전거리 미확보로 인한 교통사고는 매년 감소하는 것으로 나타나지만, 안전운전 의무 불이행 다음으로 두 번째로 높은 사고 건수를 기록하고 있다. 이는 아직도 운전자의 시인성 저하에 대한 방안이 부족하기 때문이다. 시인성 저하를 위한 대책으로 BMW, AUDI, Benz 회사에서 적외선 카메라를 이용한 나이트 비젼이 있으나 거리감지기능이 없어 디스플레이를 계속 주시하면서 운행하여야 하므로 시야가 좁아져 다른 위험이 발생할 수 있다. 현재 시중에 제공되고 있는 적외선 나이트 비젼 카메라를 이용하였을 때 일반 시야보다 약 4배 정도의 거리를 인식할 수 있었고, 이러한 나이트 비젼의 장점을 활용하여 전면 차량과의 안전거리를 확보하는 시스템을 제안한다. 본 논문에서는 제시하는 시스템은 시인성이 떨어지는 환경을 가정하여 설계하였고 나이트 비젼 카메라를 이용해 디스플레이로 출력하여 육안으로 구분할 수 없는 물체도 인지할 수 있어 헤드라이트를 켜고 운행할 때보다 안전한 운행을 할 수 있을 것으로 보인다. 하지만 디스플레이를 지속적으로 주시하며 운행할 경우 거리 감각이 떨어져 근접해 오는 물체와의 충돌 사고를 막기 힘들 것으로 보인다. 따라서 이러한 단점을 보안하기 위해 영상 데이터를 활용하여 앞 차량의 유무를 파악하고 차량이 있을 때 안전거리를 디스플레이에 표시함으로 앞 차량과의 거리를 유지하여 사고를 예방하여 안전 운행이 가능하도록 설계하였다.

• Journal of Korean Society of Transportation
• /
• v.35 no.2
• /
• pp.116-128
• /
• 2017

Traffic accidents can be defined as a physical collision event of vehicles occurred instantaneously when drivers do not perceive the surrounding vehicles and roadway environments properly. Therefore, detecting the high potential events that cause traffic accidents with monitoring the interactions among the surroundings continuously by driver is the prerequisite for prevention the traffic accidents. For the analysis, basic data were collected to analyze interactions using a test vehicle which is equipped the GPS(Global Positioning System)-IMU(Inertial Measurement Unit), camera, radar and RiDAR. From the collected data, highway geometric information and the surrounding traffic situation were analyzed and then safety evaluation algorithm for driving vehicle was developed. In order to detect a dangerous event of interaction with surrounding vehicles, locations and speed data of surrounding vehicles acquired from the radar sensor were used. Using the collected data, the tangent and curve section were divided and the driving safety evaluation algorithm which is considered the highway geometric characteristic were developed. This study also proposed an algorithm that can assess the possibility of collision against surrounding vehicles considering the characteristics of geometric road structure. The methodology proposed in this study is expected to be utilized in the fields of autonomous vehicles in the future since this methodology can assess the driving safety using collectible data from vehicle's sensors.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.2
• /
• pp.43-57
• /
• 2021

The Forward Collision Warning, a representative technology of the Advanced Driver Assistance Systems, was selected as the target technology. The cognitive response time, deceleration, and impact were selected as the measures of effectiveness. And the amount of change with and without the Forward Collision Warning was measured. The experimental scenarios included a sudden stop event (1) of the vehicle in front of the driver and an event (2) in which the vehicle intervened in the next lane. All experiments were divided into day and night. As a result of the analysis, response time and the deceleration rate decreased when the forward collision warning system was installed. It was analyzed that the driver's risk situation could be detected quickly and the number of front-end collisions could be reduced as a result. Reflecting the driver's operating habits and diversifying the experimental scenarios will increase the installation effectiveness of ADAS and be used to estimate the effectiveness of other technologies.