• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.712-715
• /
• 2010

In recent years, the driver needs the convenience of their vehicles and that there is an increasing requirement. Many researches have been mainly focused on MOST Networks to provide quality of multimedia service. The MOST network to support different bandwidth(MOST 25, MOST 50, MOST 150) should consist of a heterogeneous network. So the networks to used different protocols required gateway for receive and transmit information. The method to used gateway has problems occured loss of a packet by a lot of delay. In our previous research, we proposed a MOST GATEWAY system for organically connected to the network MOST150 and MOST 25. Therefore in this paper, we propose a simulation design Method of dynamic gateway system for MOST GATEWAY Performance Analysis in MOST25 and MOST150 Networks.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.1
• /
• pp.537-544
• /
• 2022

As the penetration of electric vehicles and development of new models, user experience factors are getting more important in designing connectivity systems for car infotainment services. The primary object of this study is to identify commonalities and differences by comparing user experience factors in the Korean and US electric vehicle markets. This study derived connectivity keywords by text mining the vehicle introduction on the market in each country, and performed centrality, cluster analysis and visualization mapping using the semantic network analysis. As a result, the Korean new electric vehicle connectivity service mainly focused on driving functions such as driving, parking assistance, and charging, while US focused on device connection, convenience function control, app use, entertainment viewing. Based on the analysis, this study presented the practical implications in marketing, system design, and HMI design.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.96-107
• /
• 2015

VANET technologies provide real-time traffic information for mitigating traffic jam and preventing traffic accidents, as well as in-vehicle infotainment service through Telematics/Intelligent Transportation System (ITS). Due to the rapid increasement of various requirements, the vehicle communication with a limited resource and the fixed frame architecture of the conventional techniques is limited to provide an efficient communication service. Therefore, a new flexible operation depending on the surrounding situation information is required that needs an adaptive design of the network architecture and protocol for efficiently predicting, distributing and sharing the context-aware information. In this paper, Vehicle-to-Infrastructure (V2I) based on communication between vehicle and a Road Side Units (RSU) and Vehicle-to-Vehicle (V2V) based on communication between vehicles are effectively combined in a new MAC architecture and V2I and V2V vehicles collaborate in management. As a result, many vehicles and RSU can use more efficiently the resource and send data rapidly. The simulation results show that the proposed method can achieve high resource utilization in accordance. Also we can find out the optimal transmission relay time and 2nd relay vehicle selection probability value to spread out V2V/V2I collaborative schedule message rapidly.

• Journal of Advanced Navigation Technology
• /
• v.22 no.3
• /
• pp.213-219
• /
• 2018

In this paper, we propose a design method and process for hardware and software of hybrid V2X communication module that supports both C-ITS communication protocol designed for vehicle environment and Legacy LTE communication technology. C-ITS is suitable for safety service applications due to its low latency characteristics, and Legacy LTE is a technology suitable for non-safety applications such as traffic information and infotainment due to high latency and high capacity. The hybrid V2X communication module supports multiple communication technologies of WAVE and LTE, in which WAVE supports multiple channels, so that it is designed to transmit road information such as LDM and positioning correction information to an autonomous vehicle in real time. The main design results presented in this paper will be applied to the implementation of future hybrid V2X communication terminals for vehicles.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.12
• /
• pp.117-124
• /
• 2009

In this paper, we have developed communication modules for ubiquitous transportation sensor network (u-TSN). The developed module can be used for intelligent transportation services. The developed systems are based on IEEE 802.11a and IEEE 802.11g technologies for vehicle and infrastructure systems, respectively. We have found that the throughput for the developed systems is at maximum around 15 Mbps. It is reduced to 10 Mbps at a long distance and high speed condition. The performance is enough to support traffic control services in dense traffic condition.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.10
• /
• pp.15-23
• /
• 2016

To support the telematics and infotainment services, vehicle-to-everything (V2X) communication requires a robust and reliable network. To do this, the 3rd Generation Partnership Project (3GPP) has recently developed V2X communication. For reliable communication, accurate channel estimation should be done. However, because vehicle speed is very fast, radio channel is rapidly changed with time. Therefore, it is difficult to accurately estimate the channel. In this paper, we propose the new linear minimum mean square error (LMMSE) channel interpolation scheme based on the Long Term Evolution (LTE) sidelink system in vehicle-to-vehicle (V2V) environments. In our proposed reduced decision error (RDE) channel estimation scheme, LMMSE channel estimation is applied in the pilot symbol, and then in the data symbol, smoothing and LMMSE channel interpolation scheme is applied. After that, time and frequency domain averaging are applied to obtain the whole channel frequency response. In addition, the LMMSE equalizer of the receiver side can reduce the error propagation due to the decision error. Therefore, it is possible to detect the reliable data. Analysis and simulation results demonstrate that the proposed scheme outperforms currently conventional schemes in normalized mean square error (NMSE) and bit error rate (BER).

• Journal of Technology Innovation
• /
• v.29 no.4
• /
• pp.161-196
• /
• 2021

This study presents a new methodology for developing AI-based products. It identifies the distinctive attributes of AI innovation that are different from existing methods, and presents a product design process and methodology reflecting these attributes. This study emphasizes that AI product development should be oriented toward an ambidexterity approach. This study proposes a design process and specific development method for AI-based products that including steps such as technology push oriented idea generation with morphological approach, market pull oriented consumer requirements analysis, product design refinement, etc. In order to verify the practical applicability of this methodology, an AI-based car infotainment system development strategy is derived as a case study. 13 innovative ideas were generated by the morphological approach and expert review based on technological possibility, and a total of 6 quality requirements were derived as new product development strategies through the analysis of consumer requirements by combining Kano and TOPSIS. The methodology proposed in this research paper can be usefully utilized for companies to pioneer new markets through AI-based products or to expand the market by upgrading existing products or services.

• Journal of Service Research and Studies
• /
• v.11 no.3
• /
• pp.43-54
• /
• 2021

This study focused on indoor spaces and convenience devices among vehicle interior designs suitable for the autonomous driving era, and presented an interior design model for future automobiles by applying the STEEP analysis method. The service design methodology is applied to deal with changes in display devices installed for the purpose of rearranging layouts and providing driver-centered information. Changes in types and installation locations of displays for various purposes such as connected and infotainment are expected. In particular, through this analysis, trends and experiences through indoor interior research in future self-driving cars will be studied, and subsequent studies will be used as basic data for actual development and application. Key drivers were extracted after deriving future trends linking the research project conducted in five stages to STEEP and consulting experts through FGI. Through this, it was later presented as a direction for indoor design. Through user-centered participatory design methods, emotional keyword derivation methods were used, summarized the derived drivers in five major trends in the future society, and each derived drivers were grouped to consider the relevant technology fields, and added elements to the autonomous driving level. This is an indoor ray viewed from the perspective of various social issues as well as personal tendencies in the future self-driving car industry.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.3-9
• /
• 2017

Recently, in 3rd Generation Partnership Project(3GPP), there is a study of the Long Term Evolution(LTE) based vehicle communication which has been actively conducted to provide a transport efficiency, telematics and infortainment. Because the vehicle communication is closely related to the safety, it requires a reliable communication. Because vehicle speed is very fast, unlike the movement of the user, radio channel is rapidly changed and generate a number of problems such as transmission quality degradation. Therefore, we have to continuously updates the channel estimates. There are five types of conventional channel estimation scheme. Least Square(LS) is obtained by pilot symbol which is known to transmitter and receiver. Decision Directed Channel Estimation(DDCE) scheme uses the data signal for channel estimation. Constructed Data Pilot(CDP) scheme uses the correlation characteristic between adjacent two data symbols. Spectral Temporal Averaging(STA) scheme uses the frequency-time domain average of the channel. Smoothing scheme reduces the peak error value of data decision. In this paper, we propose the novel channel estimation scheme in LTE based Vehicle-to-Vehicle(V2V) environment. In our Hybrid Reliable Channel Estimation(HRCE) scheme, DDCE and Smoothing schemes are combined and finally the Linear Minimum Mean Square Error(LMMSE) scheme is applied to minimize the channel estimation error. Therefore it is possible to detect the reliable data. In simulation results, overall performance can be improved in terms of Normalized Mean Square Error(NMSE) and Bit Error Rate(BER).