Transactions of the Korean Society of Mechanical Engineers
/
v.13
no.3
/
pp.461-471
/
1989
For the mixed-mode crack problems the direction of crack growth, the crack path and the rational representation of fatigue crack growth rates should be studied to predict fatigue life and safety of structures. In this study, a round specimen which produce nearly identical effects in all loading directions is proposed to make an easy measurement of initial direction of crack growth. The mode I and mode II stress intensity factors of the specimen were calculated using finite element method, in which the square root singular stresses at the crack tip are modeled by means of four rectangular quarter-point eight-noded elements surrounding the crack tip. Experimental results for high strength aluminum alloy showed that the direction of mixed-mode crack growth agree well with maximum principal stress criterion as well as minimum strain energy density criterion, but not with maximum shear stress criterion. From data of fatigue crack growth rates using crack geometry projected on the line perpendicular to the loading direction it is easily established that mixed-mode fatigue crack growth in 5083-H115 aluminum alloy goes predominantly with mode I crack growth behaviors.
Journal of Korea Society of Industrial Information Systems
/
v.25
no.2
/
pp.39-47
/
2020
This paper introduces a novel system-level framework that derives energy efficient electric vehicle (EV) driving speed profile to extend EV driving range without additional cost. This paper first implements an EV power train model considering forces acting on a driving vehicle and motor efficiency. Then, it derivate the minimum-energy driving speed profile for a given driving mission defined by the route. This framework first formulates an optimization problem and uses the dynamic programming algorithm with a weighting factor to derive a speed profile minimizing both of energy consumption and driving time. This paper introduces various weighting factor tracking methods to satisfy the driving time constraint. Simulation results show that runtime of the proposed scaling algorithm is 34% and 50% smaller than those of the binary search algorithm and greedy algorithm, respectively.
The Journal of The Korea Institute of Intelligent Transport Systems
/
v.21
no.5
/
pp.15-27
/
2022
An omnidirectional VR treadmill is a highly-immersive walking simulator that allows identical body movements, such as walking, running, and sitting. However, the operation difficulty of an omnidirectional VR treadmill may cause data reliability problems. Therefore, this study aims to verify the effectiveness of a VR treadmill by comparing the ability to orient in the real and virtual worlds spatially. For this purpose, a rotating and searching path experiment was conducted with participants. This experiment showed that there was no statistically significant difference in the ability of the participants to orient in the real and virtual worlds spatially. In addition, the omnidirectional VR treadmill requires an adaptation time for the users due to the difficulty in the treadmill operation. However, there was no significant difference in the difficulty felt by the participants according to the adaptation time. Hence, these findings supported the possibility of collecting realistic walking data without safety concerns through an omnidirectional VR treadmill. Furthermore, this treadmill could be used in future research to solve problems directly related to pedestrian safety, such as the interaction between vehicles and pedestrians.
The Journal of The Korea Institute of Intelligent Transport Systems
/
v.15
no.5
/
pp.62-70
/
2016
Ensuring walkability in a city where pedestrians and vehicles coexist is an issue of critical importance. The relative relationship between vehicle transit and walkability improvements complicates the evaluation of walkability, which thus necessitates the formation of a quantitative standard by which a methodological measurement of walkability can be achieved inside the pedestrian network. Therefore, a model is determined whereby quantitative indices such as, but not limited to, experiences of accessibility, mobility, and convenience within the network are estimated. This research proposes the integration of space syntax theory and the logit path choice model in the evaluation of walkability. Space syntax theory assesses adequacy of the constructed pedestrian network through calculation of the link integration value, while the logit model estimates its safety, mobility, and accessibility using probability. The advantage of the integrated model hence lies in its ability to sufficiently reflect such evaluation measures as the integration value, mobility convenience, accessibility potential, and safety experienced by the demand in a quantitative manner through probability computation. In this research, the Dial Algorithm is used to arrive at a solution to the logit model. This process requires that the physical distance of the pedestrian network and the perceptive distance of space syntax theory be made equivalent. In this, the research makes use of network expansion to reflect wait times. The evaluation index calculated through the integrated model is reviewed and using the results of this sample network, the applicability of the model is assessed.
The Journal of Korean Institute of Communications and Information Sciences
/
v.37
no.8C
/
pp.721-730
/
2012
In this paper the problem of a moving control of an automatic guided vehicle(AGV) which transports a dead body to a designated cinerator safely in a crematorium, an special indoor environment, will be discussed. Since a method of burying guided lines in the floor is not proper to such an environment, a method of moving control of an AGV based on infrared ray sensors is now proposed. With this approach, the AGV emits infrared ray to the landmarks adheres to the ceiling to find a moving direction and then moves that direction by recognizing them. One of the typical problems for this method is that dead zone and/or overlapping zone may exist when the landmarks are deployed. To resolve this problem, an algorithm of recognizing double landmarks at each time is applied to minimize occurrences of sensing error. In addition, at the turning area to entering the designated cinerator, to fit an AGV with the entrance of the designated cinerator, an algorithm of controlling the velocity of both the inner and outer wheel of it. The functional correctness of our proposed algorithm has been verified by using a prototype vehicle. Our real AGV system has been applied to a crematorium and it moves automatically within an allowable range of location error.
Journal of the Korea Academia-Industrial cooperation Society
/
v.14
no.6
/
pp.2604-2611
/
2013
The Personal Rapid Transit(PRT) system has been highly interested in future transportation developments due to its on-demand and optimized door-to-door transport capability. However, the major impediments to the commercialization of PRT are the high cost for construction of infrastructures as opposed to the small transport capacity and difficulty in defining the role of PRT in building a balanced transportation system. In this study, the vertical transfer device for the PRT vehicle is developed to provide more flexible and better compatible urban mobility services between means of transportation, which is expected to meet particular demands in a particular environment. This apparatus was initially designed based on the basis of vertical circulating conveyors with steel chains, which is frequently used in logistics. Its advantages are capable of the non-stop loading and reduced head-way time. Most importantly, it was intensified by the additional idea to ensure the stable and reliable transfer of the PRT vehicle fully loaded with passengers. The 1/10-scale prototype was successfully tested to demonstrate a fundamental mechanism of vertical transfer and identify unexpected user requirements prior to a real manufacturing process.
Journal of Korean Society for Geospatial Information Science
/
v.9
no.2
s.18
/
pp.29-36
/
2001
The purpose of this paper is to describe the Disaster Management System Development of Enterprise GIS at the Kangwon Province in Korea. This project is included into 'the Kangwon Enterprise GIS 21 plan'. The Division of Disaster Management is in the middle of the 2-year project of the Disaster Management System development, appropriate for business performed at the Departments of Forestry, Culture, Environment, Tourism, etc. At the 1st phase of CIS implementation, for more than half a year we focused on the necessity of management of disasters. In the planning process, we needed long-term information on the whole area of Kangwon. In the assessment and response processes, we needed real-time data from Korean Meteorological Administration and other agencies. All the above information was carefully studied and referred to. ESRI's new GIS technologies solve the natural hazard/disaster problems. For example, hazardous materials routing often needs to be found the least expensive path through a roadway network. In the circumstances given, we can choose the departure point and destination of the vehicle, which carries the materials. It's also possible to minimize overall risk and costs of disaster problems by making a plan of people and possessions evacuation from the disaster area in short time limits. We can meet all the above goals using the latest ESRI's technologies.
교통수요는 교통정책 및 교통시설 계획의 수립 및 평가에 중요한 영향을 미치게 되므로 교통수요의 예측은 교통연구에서 중요한 부문을 차지하고 있다. 도로밑에 설치된 전자차량감지기(Electronic Vehicle Detector)로부터 자동 수집된 링크 교통량 자료(Traffic Counts)를 주요 입력자료로 이용하여 계획지역의 기종점 통행표(Origin Destination Trip Matrix)를 작성할 수 있는 기법 들이 최근 수년동안 많이 발달하게 되었다. 이러한 새로운 기법들은 가구조사(Home Inteview), 노변면접조사(Road-Side Interview)등을 토하여 조사된 자료를 기초로하는 전통적은 4단계 교통수요추정방법(Conventional 4-Stage Estimation Method)-통행발생(Generation), 통행분포(Distribution), 수단선택(Modal Split), 교통배분(Assignment)-과 비교하여 첫째로 정확도가 높은 링크 교통량 자료를 별도의 조사를 거치지 않고서도 수집이 가능하기 때문에 조사비용이 거의 들지 않아도 되어 경제적이고, 둘째로 전통적인 수요예측방법들에서 요구되어지는 복잡한 모형수립 및 계수조정(Parameter Calibration)이 필요하지 않아 간편하고 셋째로 오래전에 작성된 기종점 통행표를 단순히 링크 교통량 자료만을 이용하여 쉽게 보완할 수 있어 지속적인 자료의 축적(Data Age-ing)이 가능하며 더 나아 가서 소위 연속적인 교통 계획 및 교통시설관리(Continuous Transport Planning and Management)를 가능케 하는 등의 여러 장점 때문에 많은 주목을 받아 오고 최근 몇 년이 꾸준히 실무에 유용하게 적용이 되고 있는 실정이다. 본 연구는 링크 교통량자료를 이용하여 기종점 통행표를 작성하기 위하여 개발된 기존의 여러 기법들 가운데 특히 용량제약조건(Capacity-Restrained Condition)하에서 기존의 방법들을 상호 검토한 후 Wardrop의 교통망 평형원칙(Wardrop's First Network Equilibrium Principle)을 만족하는 새로운 추정기법을 제의하고 이의 시험결과를 논의하는 것을 주요내용으로 한다. 링크 교통량 자료를 이용하여 기종점 통행표를 작성하는 기법들의 근본 목표는 조사된 링크 교통량(Ob-served Traffic Counts)에 가장 근접한 교통망 통행 배정 링크 교통량(Assigned Link Volumes)을 재현(Re-producing)할 수 있는 기종점 통행표들 중에서 최적의 기종점 통행표를 발견하는 것이다. 따라서 교통망에서 통행자의 여행 경로 배정을 가장 잘 반영할 수 있는 현실적인(Realistic) 교통망 통행 배정 모형(Net-work Traffic Assignment Model)의 선택은 중요한 요소가 되며 특히 교통망에 교통체증(Traffic Conges-tion)이 심할 경우 교통망 통행자 평형조건(Network Traffic Equilibrium Condition)을 고려하기 위한 특별한 처리가 요구되어진다. 본 연구는 Whllumsen(Hall, Van Vliet and Willumsen, 1980)에 의하여 개발된 ME2(Maximum Entropy Matrix Estimation)기법에서 반복식 추정방법(Sequential Estimation Method)을 사용할 경우 Wardrop의 평형조건을 만족하는 기종점 통행표를 구할 수 없다는 단점을 극복하기 위한 방안으로서 엔트로피 극대화문제와 교통망 평형 조건(Entropy Maximisation and Network Equilibrium Condition)의 두 문제를 동시에 해결할 수 있는 새로운 수식모형과 이를 풀기 위한 알고리즘(Simultaneous Solution Algorithm)을 제의하였다. 제의된 수식모형과 알고리즘을 예제 교통망(Example Network)을 이용한 시험하고 그 결과를 ME2 의 반복식 추정 방법으로부터 구한 기종점 통행표와 비교 검토하였다.
This study was conducted to examine the stress effects of time pressure and induced driver-anger on driving performance. The participants in the four different stress conditions(i.e., control condition, time pressure, induced anger, and mixed condition where induced-anger and time pressure were combined) were asked to drive the driving simulator, and their driving performances(i. e., lane crossing, signal violation, speeding, and deviation form designated path) were measured as the dependent variable. The results can be summarized as followings. (1) Induced-anger alone and the mixed driver stresses tended to yield deteriorated driving performances as well as awareness for designated path, (2) Time pressure alone appeared to have only limited effect both on the driving and path awareness. And (3) the effects of induced-anger alone and the mixed condition on driving performance and path awareness did not show ant significant difference. The results of the present study indicated that drivers' basic vehicle control and keeping awareness to destination could be affected differently by the types of driver stress.
KIPS Transactions on Computer and Communication Systems
/
v.5
no.12
/
pp.455-462
/
2016
Wireless sensor networks have been researched to gather data about events on sensor fields from sources at sinks. Multipath routing is one of attractive approaches to reliably send data against the problem of frequent breakages on paths from sources to sinks due to node and link failures. As mobile events such as humans, animals, and vehicles are considered, sources may be continuously generated according to the movement of the mobile event. Thus, mobile events provide new challenging issue in multipath routing. However, the research on multipath routing mainly focus on both efficient multipath construction from sources to static sinks and fast multipath reconstruction against path breakages. Accordingly, the previous multipath routing protocols request each source continuously generated by a mobile event to construct individual multipath from the source to sinks. This induces the increase of multipath construction cost in the previous protocols in proportion to the number of source. Therefore, we propose efficient multipath routing protocol for supporting continuous sources generated by mobile events. In the proposed protocol, new source efficiently reconstructs its multipath by exploiting the existing multipath of previous sources. To do this, the proposed protocol selects one among three reconstruction methods: a local reconstruction, a global partial one, and a global full one. For a selection decision, we provide an analytical energy consumption cost model that calculates the summation of both the multipath reconstruction cost and the data forwarding cost. Simulation results show that the proposed protocol has better performance than the previous protocol to provide multipath routing for mobile events.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.