• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.83-89
• /
• 2014

A ku-band complementary cross-coupled differential voltage controlled oscillator is designed, measured and fabricated using $0.18-{\mu}m$ CMOS technology. A 2.4GHz of very wide frequency tuning at oscillating frequency of 14.5GHz is achieved with presented circuit topology and MOS varactors. Measurement results show -1.66dBm output power with 18mA DC current drive from 3.3V power supply. When 5V is applied, the output power is increased to 0.84dBm with 47mA DC current. -74.5dBc/Hz phase noise at 100kHz offset is measured. The die area is $1.02mm{\times}0.66mm$.

• The KIPS Transactions:PartA
• /
• v.12A no.6 s.96
• /
• pp.531-538
• /
• 2005

In the high performance Analog Information Processing Systems(AIPS), gain boosting or additional gain stage is required when the gain is not sufficient with one stage amplification. This work shows that high gain is neatly obtained by enhancing the gain using the negative resistance element. Compared to the conventional techniques, the proposed scheme enjoys full output swing, small circuit area and power consumption, and the applications to various configurations of amplifiers. The negative resistance element is placed between the differential output nodes when used in the Op-Amp. The HSPICE simulation indicates that enhancement of more than 40 dB is readily obtained in this simple configuration when the negative resistance element is implemented in the form of cross-coupled CMOS inverters.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.4
• /
• pp.17-24
• /
• 1972

A simply constructed and inexpensive amplifier that exhibits unusually low noise is studied. The high-performance differential amplifier combines high input impedence, adjustable gain, low in put noise and low output impedance. The amplifier is particularly useful in applications which call for large amplificaions of very low level signals.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.947-950
• /
• 2003

본 논문에서는 고속 적외선 무선 데이터통신(IrDA) 에 사용되는 트랜스임피던스 증폭기(Transimpedance Amplifier)를 설계하였다. 트랜스임피던스 증폭기는 잡음을 최소화하기 위해 PMOS 차동 구조로 설계하였으며 입력과 출력의 피드백을 통해 주위의 빛에 의해 발생되는 photocurrent 에 의한 DC 옵셋을 제거하였다 또한 공통 게이트(CG)와 Regulated Cascode Circuit (RGC)을 추가하여 대역폭(Bandwidth)을 향상시켰다. 설계한 회로는 0.25 um CMOS 공정을 이용하였으며 트랜스임피던스 이득은 200 MHz의 대역폭에서 10 KΩ (80 dBΩ )이다. 전체 전력 소비는 18 mW이다.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.21-22
• /
• 2015

플라이백 컨버터에서 발생하는 EMI 공통모드 잡음은, 스위치 turn-off에서 1차 측 누설 인덕턴스로 인한 기생 진동과 turn-on에서 발생하는 2차 측 출력회로의 기생 진동으로 구성된다. 차동모드 잡음은 직류전원의 스위칭 전류로 인한 전압 강하 성분으로 나타나며 직류전원 임피이던스에 비례하여 증가한다. 1차 측 기생진동은 느린 속도의 일반 다이오드와 직렬저항 삽입으로, 2차 측기생진동은 정류 다이오드의 RC 스너버로 감소 시킨다. 누설 인덕턴스가 큰 UU코어 EMI 필터가 잡음 감소에 유효함을 보인다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.1
• /
• pp.85-93
• /
• 2007

This paper presents new LVDS I/O circuits with a high noise margin for use in highly parallel I/O environments. The proposed LVDS I/O includes transmitter and receiver parts. The transmitter circuits consist of a differential phase splitter and a output stage with common mode feedback(CMFB). The differential phase splitter generates a pair of differential signals which have a balanced duty cycle and $180^{\circ}$ phase difference over a wide supply voltage variation due to SSO(simultaneous switching output) noises. The CMFB output stage produces the required constant output current and maintains the required VCM(common mode voltage) within ${\pm}$0.1V tolerance without external circuits in a SSO environment. The proposed receiver circuits in this paper utilizes a three-stage structure(single-ended differential amp., common source amp., output stage) to accurately receive high-speed signals. The receiver part employs a very wide common mode input range differential amplifier(VCDA). As a result, the receiver improves the immunities for the common mode noise and for the supply voltage difference, represented by Vgdp, between the transmitter and receiver sides. Also, the receiver produces a rail-to-rail, full swing output voltage with a balanced duty cycle(50% ${\pm}$ 3%) without external circuits in a SSO environment, which enables correct data recovery. The proposed LVDS I/O circuits have been designed and simulated with 0.18um TSMC library using H-SPICE.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.2064-2066
• /
• 2004

본 논문에서는 새로운 개념인 능동 고조파 결합을 이용한 4위상 전압제어 발진기를 설계, 제작하였다. 4위상 출력 특성을 얻기 위하여 각각의 차동 VCO의 가상 접지(Virtual Ground)면을 본 논문에 제시된 능동 고조파 결합 회로(Active super harmonic coupling)을 이용하여 결합시키는 방법을 적용하였다. 제안된 구조는 다음과 같은 장점을 가지고 있다. 결합구조를 갖는 트랜지스터에 부가적인 전류소비를 줄일 수 있으며, layout상에서 문제되었던 대칭구조를 개선할 수 있다. 또한 기존에 발표되었던 방법인 passive transformer를 이용한 고조파 결합 보다 회로 크기를 줄일 수 있다. 측정결과 출력 전력 -12dBm, -117dBc/Hz @1-MHz 이하의 위상잡음 특성, 2.66GHz${\sim}$2.91GHz의 250 MHz 주파수 가변, 25dB이하의 2차고조파 억압, 7 mA 의 전류 소모(buffer amp. 포함되지 않음)를 가졌다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.86-94
• /
• 2009

An idea to improve the performance of error correction with the amplification of input symbol errors is proposed to ease the mismatching problem which occurs in the hardware implementation of the differential analog PRML decoder. The differential analog PRML decoder is the decoder with two blocks of trellis diagram one of which is without branches of "0" and the other one is without the branches of "1". Decoding is performed by comparing the outputs of two blocks. The decoding error is likely to occur when the difference of two outputs is very small and the hardware implementation is not precise due to mismatching. The proposed idea is to increase the discrimination margin for the output "0" and "1" by amplifying the symbol error while the larger path metrics are saturated. To show the performance improvement of decoding with the proposed idea, simulation results are included

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.4 s.310
• /
• pp.53-59
• /
• 2006

This paper describes the new design technique of full wave rectifier (FWR) for precise measurement instrument and the chip implementation of this FWR circuit with measurement results. Conventional circuits have some problems of complex design and limited output range( $VDD/2{\sim}VLIIV1IT+$). Proposed FWR circuit was simply designed with two 2x1 MUXs, one high speed comparator, and one differential difference amplifier(DDA). One rail-to-rail differential difference amplifier(DDA) performs the DC level shifting to VSS and 2X amplification simultaneously, and enables the full range ($Vss{\sim}VDD$) operation. The proposed FWR circuits shows more than 50% reduction of chip area and power consumption compared to conventional one. Proposed circuit was implemented with 0.35um 1-poly 2-metal CMOS process. Core size is $150um{\times}450um$ and power dissipation is 840uW with 3.3V single supply.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.9
• /
• pp.825-833
• /
• 2016

This paper introduces a direct-conversion CMOS RF transmitter for the IEEE 802.15.4 standard with a low-power high-gain up-conversion mixer designed in $0.18{\mu}m$ process. The designed RF DCT(Direct Conversion Transmitter) is composed of differential DAC(Digital to Analog Converter), passive low-pass filter, quadrature active mixer and drive amplifier. The most important characteristic in designing RF DCT is to satisfy the 2.4 GHz Zigbee standard in low power. The quadrature active mixer inside the proposed RF DCT provides enough high gain as well as sufficient linearity using a gain boosting technique. The measurement results for the proposed transmitter show very low power consumption of 7.8 mA, output power more than 0 dBm and ACPR (Adjacent Channel Power Ratio) of -30 dBc.